Ceiling Tiles Clause Samples

POPULAR SAMPLE Copied 1 times
Ceiling Tiles. Tenant Responsibility
View Source
Ceiling Tiles. Any installation or relocation of ceiling tiles is at Tenant's expense.
View SourceView Similar (2)
Ceiling Tiles. Replace damaged and/or stained ceiling tiles.
View SourceView Similar (2)
Ceiling Tiles. A. Check and replace any ceiling tile that shows water stains to prevent mold spores quarterly.
View Source
Ceiling Tiles. Ceiling tiles shall be equal to United States Gypsum Omni Fissured, white, tegular edge, 2x2' lay in panels.
View Source
Ceiling Tiles. Replace stained or broken tiles where necessary; touch-up paint beams if needed.
View Source
Ceiling Tiles. Proprietary suspended ceilings NOTE: Electrical light fittings, diffusers, panels, etc. generally are "lay in" units of the same dimensions as the suspension grid described and allowance must be made accordingly for their support inclusive of any flexibility in setting out that may be required (ceiling panels have not been deducted and pricing is to take cognisance thereof). --- Ceiling comprising 595 x 595 x 9mm thick Gyprex Fissured ceiling 36 898 Ceilings suspended not exceeding 1000mm below steel purlins which are at centres exceeding 1200mm and not exceeding 1400mm. m² 218 37 263 Extra over ceiling for opening for sprinkler head. No 60 37 628 Extra over ceiling for opening for 600 x 600mm light fitting. No 40 37 993 Extra over ceiling for 600 x 600mm opening for ventilation grille/air conditioning diffuser No 20 Ceiling comprising 1195 x 595 x 9mm thick Gyprex Fissured ceiling tiles backed with 25mm thick polystyrene insulation, fissured white finish, suspended on, and including, "▇▇▇▇ QRC T38V" tee suspension system with main tees at 1200mm centres and cross tees between each tile at 600mm centres all according to manufactures specifications, including hold-down clips, galvanised hangers, etc. 38 359 Ceilings suspended not exceeding 1000mm below steel purlins which are at centres exceeding 1200mm and not exceeding 1400mm. m² 362 38 724 Extra over suspended ceiling with Nuclad ceiling tiles for peripheral margin against surrounding walls, the margin not exceeding 500mm wide, comprising 6.4mm thick plasterboard, skim-plastered, and with shadow-line perimeter detail against wall [see detail on drawing No. AR/BSC-P1-MPC/220 stage T] and "Flush plaster and Lay-in Interface Detail [see drawing No. AR/BSC-P1-MPC/220 stage T], including ▇▇▇▇ ▇▇▇▇▇▇▇ trims against ▇▇▇▇▇, ▇▇▇▇ corner-beads and ▇▇▇▇ SM25 wall- angles at interfaces [First Floor Offices 4, 5, 6]. m 170 39 089 Extra over ceiling for opening for sprinkler head. No 90 39 454 Extra over ceiling for opening for 600 x 600mm light fitting. No 121 39 820 Extra over ceiling for 600 x 600mm opening for ventilation grille/air conditioning diffuser No 112 FLUSH PLASTERBOARD CEILINGS Gypsum board flush plastered ceiling, comprising 9.5mm thick Rhinoboard, "▇▇▇▇ QRC T37K" suspension system, galvanised main tees at 1200mm centres and cross- tees at 600mm centres, joints taped and the whole ceiling skim- plastered and polished 40 185 Ceilings suspended not exceeding 1000mm below steel purlins which are at centre...
View Source
Ceiling Tiles. Landlord shall replace all existing ceiling tiles using a 2'x4' ceiling tile that gives the appearance of a 2'x2' ceiling tile. Ceiling tile replacement shall be done in phases during business hours as directed by Tenant in order for Tenant to arrange for employees to be moved to a swing space while ceiling tiles in each area of the Building are being replaced. Landlord shall use reasonable efforts not to disrupt Tenant's business during ceiling tile replacement;
View Source
Ceiling Tiles. 3.1 Access tiles and/or panels must be located under all equipment, including junction boxes. 3.2 Wherever a sheetrock ceiling is installed, access panels must be provided to any overhead equipment or junction boxes located above.
View Source

Related to Ceiling Tiles

  • Ceiling Company and its subcontractors will not affix, attach, or suspend any lighting fixtures, signs, or other fixtures or devices of any kind or nature from the ceiling above any of the Premises without the prior written approval of Authority.

  • Ceilings 13.1 Lambdaboard ceilings, minimum 25mm thick with a width of 1220mm x 1800mm, skimmed with Plascon EZ Joint and EZ Skim system. 13.2 Cornices to be Nucornice polystyrene core cove cornice as per Everite or similar approved. ▇▇▇▇ Shadow line cornices will be at extra cost if required.

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • GLASS Coverage is provided for all loss or damages to exterior glass, lettering, ornamentation and burglar foils thereon, caused by accidental breakage of such glass. The Insurer shall not be liable under this Additional Agreement for coverage for: a) loss or damage directly or indirectly from fire whether in the “premises” described in the “Declaration Page” or elsewhere; b) loss or damage caused directly or indirectly by the perils excluded in Perils Excluded section 6.B of the Commercial Property Broad Form (CMF-0005-1218); c) the cost of removing or replacing any fixtures or other obstructions to the replacement of the glass.

  • Bicycles Bicycles or other vehicles shall not be permitted anywhere inside or on the sidewalks outside of the Building, except in those areas designated by Landlord for bicycle parking.