CONSTRUCTION STAKING AND LAYOUT Sample Clauses

CONSTRUCTION STAKING AND LAYOUT. 13.3.1 The Engineer shall be responsible for providing labor, equipment and materials necessary for construction staking and layout as required, to the grades, elevations and alignment as per the plans and drawings issued by the City. The contractor shall make all reasonable efforts to protect staking and layout. In the event of contractor's negligence control points are destroyed, the Engineer shall replace staking and layout as required on a time and material cost, such cost will be deducted from the contractor's final payment.
View SourceView Similar (5)
CONSTRUCTION STAKING AND LAYOUT. 13.3.1 The Contractor shall be responsible for providing labor, equipment, and materials necessary for construction staking and layout as required, to the grades, elevations, and alignment as determined by the City. No separate payment will be made for construction staking and layout. The Contractor shall make his bid accordingly. No payment shall be made for restaking except as expressly authorized due to changes made by the City during construction.
View Source
CONSTRUCTION STAKING AND LAYOUT. We anticipate approximately 35 crew days (2 person staking crew for 8 hours) of construction staking and layout to support the First, Ashley, and ▇▇▇▇▇▇▇▇ Street Projects. • We will set project control and additional benchmarks as needed to maintain project integrity. • It is the contractor’s responsibility to protect said control throughout the construction process. Any control re-establishment due to contractor removal will be provided at an additional cost. • Our fee assumes the following staking tasks to be included in the scope of work: o Demolition Limits o Curb Staking o Sidewalk & ADA Ramp Staking o Storm Sewer staking o Watermain Staking o Traffic Signal Staking o Light Pole Staking • The following staking tasks are NOT included in our fee and are considered out of scope: o MOT Staking o Landscape Staking (staking of detailed streetscape) o Proposed Signage & Striping o Staking of underground conduit (electric for lighting) o Planting Plans • All staking and cut sheets will be completed following the City of ▇▇▇ Arbor staking guidelines. • Fees are for one-time staking; any re-staking shall be completed at an additional cost to the contractor on a Time and materials basis. • Our fee assumes staking will be completed in non-frost conditions based on the project schedule (April- Nov.)
View Source

Related to CONSTRUCTION STAKING AND LAYOUT

  • Construction Standards It is agreed that any construction undertaken by the Owner pursuant to the terms of this Agreement which is not shown on the approved engineering drawings and specifications shall be in accordance with Town standards as interpreted by the Director of Operations.

  • Construction Schedule The progress schedule of construction of the Project as provided by Developer and approved by District.

  • CONSTRUCTION AND RENOVATION Construction and renovation projects for a state, local, territorial, or Tribal government’s principal Emergency Operations Center (EOC) as defined by the State Administrative Agency are allowable under the EMPG Program. Written approval must be provided by FEMA prior to the use of any EMPG Program funds for construction or renovation. Requests for EMPG Program funds for construction of an EOC must be accompanied by an EOC Investment Justification (located in the Related Documents tab of the EMPG ▇▇▇▇▇▇.▇▇▇ posting) to their Regional EMPG Manager for review. Additionally, recipients are required to submit a SF-424C Form and Budget detail citing the project costs. When applying for funds to construct communication towers Sub-Recipients must submit evidence that the Federal Communication Commission’s (FCC) Section 106 review process has been completed and submit all documentation resulting from that review to Grants Program Directorate (GPD) prior to submitting materials for EHP review. Sub-Recipients are also encouraged to have completed as many steps as possible for a successful EHP review in support of their proposal for funding (e.g., coordination with their State Historic Preservation Office to identify potential historic preservation issues and to discuss the potential for project effects, compliance with all state and EHP laws and requirements). Projects for which the Sub-Recipient believes an Environmental Assessment (EA) may be needed, as defined in as defined in DHS Instruction Manual 023-01-001-01, Revision 01, FEMA Directive 108-1 and FEMA Instruction 108-1-1, must also be identified to the FEMA EMPG Regional Program Manager within six months of the award, and completed EHP review materials must be submitted no later than 12 months before the end of the period of performance. EHP review packets should be sent to ▇▇▇▇▇▇▇▇▇▇@▇▇▇▇.▇▇▇. EMPG Program Sub-Recipients using funds for construction projects must comply with the ▇▇▇▇▇-▇▇▇▇▇ Act (40 U.S.C. §§ 3141 et seq.). Grant Sub-Recipients must ensure that their contractors or subcontractors for construction projects pay workers no less than the prevailing wages for laborers and mechanics employed on projects of a character similar to the contract work in the civil subdivision of the state in which the work is to be performed. Additional information regarding compliance with the ▇▇▇▇▇- ▇▇▇▇▇ Act, including Department of Labor (DOL) wage determinations, is available from the following website: ▇▇▇▇▇://▇▇▇.▇▇▇.▇▇▇/whd/govcontracts/dbra.htm In general, Sub-Recipients should consult with their Grant Manager prior to making any investment that does not clearly meet the allowable expense criteria established in this Guidance.

  • Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When CCI or its authorized agent owns the splitter, Line Splitting requires the following: a non- designed analog loop from the serving wire center to the network interface device (NID) at the end user’s location; a collocation cross connection connecting the loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The loop and port cannot be a loop and port combination (i.e. UNE-P), but must be individual stand-alone network elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog loop from the serving wire center to the network interface device (NID) at the end user’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port. 3.8.2 An unloaded 2-wire copper loop must serve the end user. The meet point for the Voice CLEC and the Data LEC is the point of termination on the MDF for the Data LEC's cable and pairs. 3.8.3 The foregoing procedures are applicable to migration to Line Splitting Service from a UNE-P arrangement, BellSouth Retail Voice Service, BellSouth High Frequency Spectrum (CO Based) Line Sharing. 3.8.4 For other migration scenarios to line splitting, BellSouth will work cooperatively with CLECs to develop methods and procedures to develop a process whereby a Voice CLEC and a Data LEC may provide services over the same loop.