COR Certification Clause Samples

The COR Certification clause requires a party to provide proof of a valid Certificate of Recognition (COR), which demonstrates compliance with established health and safety standards, typically in the construction or industrial sectors. This clause usually obligates contractors or subcontractors to obtain and maintain COR certification throughout the duration of a project, and to present evidence of such certification upon request. Its core practical function is to ensure that all parties involved adhere to recognized safety practices, thereby reducing workplace accidents and allocating responsibility for safety compliance.
COR Certification. ‌ (a) Project Co shall, at its own cost and risk, at all times during the performance of the Works cause a COR-Qualified Construction Project Co Party or COR-Certified Construction Project Co Party, as the case may be, to: (i) to the extent a COR-Qualified Construction Project Co Party has not obtained COR Certification prior to Financial Close, (I) use best efforts to obtain its COR Certification no later than eighteen months following Financial Close. In the event that Contracting Authority is satisfied, in its sole discretion, that the COR-Qualified Construction Project Co Party has used best efforts to obtain its COR Certification in accordance with this Section 11.24 and the COR-Qualified Construction Project Co Party has not obtained COR Certification by the end of such eighteen month period, then Contracting Authority shall establish a time period during which the COR-Qualified Construction Project Co Party shall obtain its COR Certification, which time period shall not be less than 30 days, and (II) maintain in good standing and, as applicable, renew its OHSAS 18001 Accreditation until such time as the COR-Qualified Construction Project Co Party has obtained its COR Certification, and (ii) once the COR-Qualified Construction Project Co Party is certified (thereafter referred to as a “COR-Certified Construction Project Co Party”), maintain in good standing, and, as applicable, renew its COR Certification; and (iii) comply with all requirements of its OHSAS 18001 Accreditation (if a COR- Qualified Construction Project Co Party) or COR Certification (if a COR- Certified Construction Project Co Party), in accordance with its terms. (b) Without limiting any other provision of this Project Agreement, if at any time during the performance of the Works:‌ (i) a COR-Qualified Construction Project Co Party fails to obtain its COR Certification in accordance with this Project Agreement and Contracting Authority determines that the failure to obtain the COR Certification is as a result of such COR-Qualified Construction Project Co Party not using best efforts to obtain such certification and Contracting Authority delivers a Notice to Project Co indicating that a COR-Qualified Construction Project Co Party has failed to obtain its COR Certification in accordance with this Project Agreement; or (ii) a COR-Qualified Construction Project Co Party fails to maintain its OHSAS 18001 Accreditation in good standing in accordance with its terms or in accordance with this ...
View SourceView Similar (19)
COR Certification. ‌ 18.3.1 The NOPs shall, at all times during the performance of the Works cause each COR- Qualified Construction NOP Party and each COR-Certified Construction NOP Party, as the case may be, to: to the extent a COR-Qualified Construction NOP Party has not obtained COR Certification prior to execution of this Agreement, (a) use best efforts to obtain its COR Certification no later than 18 months following the date of execution of this Agreement. In the event that Owner is satisfied, in its sole and absolute discretion, that the COR-Qualified Construction NOP Party has used best efforts to obtain its COR Certification in accordance with this Section 18.3.1.1(a) and the COR-Qualified Construction NOP Party has not obtained COR Certification by the end of such 18 month period, then Owner shall establish a time period during which the COR-Qualified Construction NOP Party shall obtain its COR Certification, which time period shall not be less than 30 days, and‌ (b) maintain in good standing and, as applicable, renew its OHSAS 18001 Accreditation until such time as the COR- Qualified Construction NOP Party has obtained its COR Certification, once the COR-Qualified Construction NOP Party is certified (hereafter referred to as a “COR-Certified Construction NOP Party”), maintain in good standing, and, as applicable, renew its COR Certification; and comply with all requirements of its OHSAS 18001 Accreditation (if a COR- Qualified Construction NOP Party) or COR Certification (if a COR-Certified Construction NOP Party), in accordance with its terms.
View Source

Related to COR Certification

  • Labor Certification By its signature hereunder, Consultant certifies that it is aware of the provisions of Section 3700 of the California Labor Code which require every employer to be insured against liability for Workers’ Compensation or to undertake self-insurance in accordance with the provisions of that Code, and agrees to comply with such provisions before commencing the performance of the Services.

  • S▇▇▇▇▇▇▇-▇▇▇▇▇ Certification Each Form 10-K with respect to the Trust shall include a S▇▇▇▇▇▇▇-▇▇▇▇▇ Certification in the form attached to this Agreement as Exhibit X required to be included therewith pursuant to the S▇▇▇▇▇▇▇-▇▇▇▇▇ Act. The Certificate Administrator, the Master Servicer, the Special Servicer, the Operating Advisor, the Asset Representations Reviewer (in the case of the Asset Representations Reviewer, solely with respect to reporting periods in which the Asset Representations Reviewer is required to deliver an Asset Review Report Summary), the Custodian and the Trustee shall provide (and (i) with respect to any Servicing Function Participant of such party that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Servicing Function Participant to provide, and (ii) with respect to any other Servicing Function Participant of such party (other than any party to this Agreement), shall cause such Servicing Function Participant to provide) to the Person who signs the S▇▇▇▇▇▇▇-▇▇▇▇▇ Certification for the Trust or any Other Securitization Trust (the “Certifying Person”) no later than March 1 in the year immediately following the year as to which such Form 10-K relates or, if March 1 is not a Business Day, on the immediately following Business Day, a certification in the form attached to this Agreement as Exhibit Y-1, Exhibit Y-2, Exhibit Y-3, Exhibit Y-4, Exhibit Y-5, Exhibit Y-6, Exhibit Y-7 and Exhibit Y-8, as applicable, on which the Certifying Person, the entity for which the Certifying Person acts as an officer, and such entity’s officers, directors and Affiliates (collectively with the Certifying Person, “Certification Parties”) can reasonably rely. With respect to each Outside Serviced Mortgage Loan serviced under an Outside Servicing Agreement, the Certificate Administrator shall use commercially reasonable efforts to procure, and upon receipt deliver to the Certifying Person, a S▇▇▇▇▇▇▇-▇▇▇▇▇ back-up certification similar in form and substance to the certifications referenced in the preceding sentence, from the related Outside Servicer, the related Outside Special Servicer, the related Outside Paying Agent and the related Outside Trustee. In the event any Reporting Servicer is terminated or resigns pursuant to the terms of this Agreement, or any applicable Sub-Servicing Agreement or primary servicing agreement, as the case may be, such Reporting Servicer shall provide a certification to the Certifying Person pursuant to this Section 10.06 with respect to the period of time it was subject to this Agreement or the applicable sub-servicing or primary servicing agreement, as the case may be.

  • Contractor Certification The Department may, at its option, terminate the Contract if the Contractor is found to have submitted a false certification as provided under section 287.135(5), F.S., or been placed on the Scrutinized Companies with Activities in Sudan List or the Scrutinized Companies with Activities in the Iran Petroleum Energy Sector List, or been engaged in business operations in Cuba or Syria, or to have been placed on the Scrutinized Companies that Boycott Israel List or is engaged in a boycott of Israel.

  • AS9100 Certification ‌ AS9100 Certification, specifies requirements for a quality management system to demonstrate the Contractor’s ability to consistently meet the customer requirements as well as statutory and regulatory requirements for the aerospace industry. An AS9100 Certification, is not mandatory; however, Contractors who desire to compete for work within the aerospace industry are encouraged to have AS9100 Certification, during the entire term of OASIS. The Contractor shall notify the OASIS CO, in writing, if there are any changes in the status of their AS9100 Certification, and provide the reasons for the change and copies of audits from an AS9100 Certification Body, as applicable. If only part of a Contractor’s organization is AS9100, certified, the Contractor shall make the distinction between which business units or sites and geographic locations have been certified.

  • ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Certification Each Form 10-K with respect to the Trust shall include a ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Certification in the form attached to this Agreement as Exhibit X required to be included therewith pursuant to the ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Act. The Certificate Administrator, the Master Servicer, the Special Servicer, the Operating Advisor, the Asset Representations Reviewer (in the case of the Asset Representations Reviewer, solely with respect to reporting periods in which the Asset Representations Reviewer is required to deliver an Asset Review Report Summary), the Custodian and the Trustee shall provide (and (i) with respect to any Servicing Function Participant of such party that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Servicing Function Participant to provide, and (ii) with respect to any other Servicing Function Participant of such party (other than any party to this Agreement), shall cause such Servicing Function Participant to provide) to the Person who signs the ▇▇▇▇▇▇▇▇-▇▇▇▇▇ Certification for the Trust or any Other Securitization Trust (the “Certifying Person”) no later than March 1 in the year immediately following the year as to which such Form 10-K relates or, if March 1 is not a Business Day, on the immediately following Business Day, a certification in the form attached to this Agreement as Exhibit Y-1, Exhibit Y-2, Exhibit Y-3, Exhibit Y-4, Exhibit Y-5, Exhibit Y-6, Exhibit Y-7 and Exhibit Y-8, as applicable, on which the Certifying Person, the entity for which the Certifying Person acts as an officer, and such entity’s officers, directors and Affiliates (collectively with the Certifying Person, “Certification Parties”) can reasonably rely. With respect to each Outside Serviced Mortgage Loan serviced under an Outside Servicing Agreement, the Certificate Administrator shall use commercially reasonable efforts to procure, and upon receipt deliver to the Certifying Person, a ▇▇▇▇▇▇▇▇-▇▇▇▇▇ back-up certification similar in form and substance to the certifications referenced in the preceding sentence, from the related Outside Servicer, the related Outside Special Servicer, the related Outside Paying Agent and the related Outside Trustee. In the event any Reporting Servicer is terminated or resigns pursuant to the terms of this Agreement, or any applicable Sub-Servicing Agreement or primary servicing agreement, as the case may be, such Reporting Servicer shall provide a certification to the Certifying Person pursuant to this Section 10.06 with respect to the period of time it was subject to this Agreement or the applicable sub-servicing or primary servicing agreement, as the case may be.