Common use of Description of Service Clause in Contracts

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) information so that Lightyear can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear intends to install and the services Lightyear wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop. The determination shall be made solely by Lightyear and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee Lightyear’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear orders loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Southern Telecom LMU information so that Lightyear Southern Telecom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Southern Telecom intends to install and the services Lightyear Southern Telecom wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Southern Telecom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Southern Telecom LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Southern Telecom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Southern Telecom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Southern Telecom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearSouthern Telecom’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Southern Telecom orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Southern Telecom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear Choice Telephone Company (LMU) information so that Lightyear Choice Telephone Company can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Choice Telephone Company intends to install and the services Lightyear Choice Telephone Company wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Choice Telephone Company ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Choice Telephone Company LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Choice Telephone Company as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Choice Telephone Company may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop. The determination shall be made solely by Lightyear Choice Telephone Company and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearChoice Telephone Company’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Choice Telephone Company orders loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Choice Telephone Company is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) ▇▇▇▇ LMU information so that Lightyear ▇▇▇▇ can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear ▇▇▇▇ intends to install and the services Lightyear ▇▇▇▇ wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear ▇▇▇▇ ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear ▇▇▇▇ LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear ▇▇▇▇ as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear ▇▇▇▇ may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear ▇▇▇▇ and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee Lightyear’s ▇▇▇▇’▇ ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear ▇▇▇▇ orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear ▇▇▇▇ is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) CCI LMU information so that Lightyear CCI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear CCI intends to install and the services Lightyear CCI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear CCI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear CCI LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear CCI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear CCI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear CCI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearCCI’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear CCI orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear CCI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear Granite (LMU) information so that Lightyear Granite can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Granite intends to install and the services Lightyear Granite wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Granite ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Granite LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Granite as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Granite may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Granite and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearGranite’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Granite orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Granite is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear Budget Phone (LMU) information so that Lightyear Budget Phone can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Budget Phone intends to install and the services Lightyear Budget Phone wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Budget Phone ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Budget Phone LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Budget Phone as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Budget Phone may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop. The determination shall be made solely by Lightyear Budget Phone and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearBudget Phone’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Budget Phone orders loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Budget Phone is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Starlink LMU information so that Lightyear Starlink can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Starlink intends to install and the services Lightyear Starlink wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Starlink ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Starlink LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Starlink as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Starlink may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Starlink and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearStarlink’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Starlink orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Starlink is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) ONS LMU information so that Lightyear ONS can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear ONS intends to install and the services Lightyear ONS wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear ONS ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear ONS LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear ONS as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear ONS may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear ONS and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee Lightyear’s ONS’ ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear ONS orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear ONS is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Velocity LMU information so that Lightyear Velocity can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Velocity intends to install and the services Lightyear Velocity wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Velocity ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Velocity LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Velocity as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Velocity may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Velocity and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearVelocity’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Velocity orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Velocity is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear CGI (LMU) information so that Lightyear CGI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear CGI intends to install and the services Lightyear CGI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear CGI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear CGI LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear CGI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear CGI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear CGI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearCGI’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear CGI orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear CGI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Victory LMU information so that Lightyear Victory can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Victory intends to install and the services Lightyear Victory wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Victory ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Victory LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Victory as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Victory may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Victory and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearVictory’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Victory orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Victory is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) SPARDI LMU information so that Lightyear SPARDI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear SPARDI intends to install and the services Lightyear SPARDI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear SPARDI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear SPARDI LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear SPARDI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear SPARDI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear SPARDI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearSPARDI’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear SPARDI orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear SPARDI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear Navigator (LMU) information so that Lightyear Navigator can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Navigator intends to install and the services Lightyear Navigator wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Navigator ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Navigator LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Navigator as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Navigator may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop. The determination shall be made solely by Lightyear Navigator and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearNavigator’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Navigator orders loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Navigator is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) AT&T LMU information so that Lightyear AT&T can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear AT&T intends to install and the services Lightyear AT&T wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear AT&T ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear AT&T LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear AT&T as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of BST will provide LMU information to the requesting CLEC on facilities is contingent upon CLEC, if either BellSouth BST or the requesting CLEC owning controls the loop(sLoop(s) that serve the service location for which LMU information has been requested by requested. When a CLEC other than the CLEC. The requesting CLEC is that controls the loop requests LMU information, BST will not authorized to receive provide the LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on with the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLECLMUSI. 2.9.1.5 Lightyear AT&T may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear AT&T and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearAT&T’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear AT&T orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear AT&T is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) NOW LMU information so that Lightyear NOW can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear NOW intends to install and the services Lightyear NOW wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear NOW ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear NOW LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear NOW as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear NOW may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear NOW and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearNOW’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear NOW orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear NOW is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear World Access (LMU) information so that Lightyear World Access can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear World Access intends to install and the services Lightyear World Access wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear World Access ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear World Access LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear World Access as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear World Access may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear World Access and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearWorld Access’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear World Access orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear World Access is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) CityNet LMU information so that Lightyear CityNet can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear CityNet intends to install and the services Lightyear CityNet wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear CityNet ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear CityNet LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear CityNet as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear CityNet may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear CityNet and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearCityNet’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear CityNet orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear CityNet is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Charter LMU information so that Lightyear Charter can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Charter intends to install and the services Lightyear Charter wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Charter ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Charter LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Charter as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Charter may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Charter and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearCharter’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Charter orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Charter is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) CCI LMU information so that Lightyear CCI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear CCI intends to install and the services Lightyear CCI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear CCI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear CCI LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear CCI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear CCI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear CCI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearCCI’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear CCI orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear CCI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) NOW LMU information so that Lightyear NOW can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear NOW intends to install and the services Lightyear NOW wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear NOW ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear NOW LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear NOW as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear NOW may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear NOW and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearNOW’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear NOW orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear NOW is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) INET LMU information so that Lightyear INET can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear INET intends to install and the services Lightyear INET wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear INET ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear INET LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear INET as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear INET may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear INET and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearINET’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear INET orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear INET is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Spectrotel LMU information so that Lightyear Spectrotel can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Spectrotel intends to install and the services Lightyear Spectrotel wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Spectrotel ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Spectrotel LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Spectrotel as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Spectrotel may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Spectrotel and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearSpectrotel’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Spectrotel orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Spectrotel is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Hopkinsville LMU information so that Lightyear Hopkinsville can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Hopkinsville intends to install and the services Lightyear Hopkinsville wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Hopkinsville ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make- Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Hopkinsville LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Hopkinsville as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Hopkinsville may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Hopkinsville and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearHopkinsville’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Hopkinsville orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Hopkinsville is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Preferred LMU information so that Lightyear Preferred can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Preferred intends to install and the services Lightyear Preferred wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Preferred ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Preferred LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Preferred as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Preferred may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Preferred and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearPreferred’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Preferred orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Preferred is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Coral Telecom LMU information so that Lightyear Coral Telecom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Coral Telecom intends to install and the services Lightyear Coral Telecom wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Coral Telecom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Coral Telecom LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Coral Telecom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Coral Telecom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Coral Telecom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearCoral Telecom’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Coral Telecom orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Coral Telecom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear BTI (LMU) information so that Lightyear BTI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear BTI intends to install and the services Lightyear BTI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear BTI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear BTI LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear BTI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear BTI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop. The determination shall be made solely by Lightyear BTI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearBTI’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear BTI orders loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.’s

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) FPB LMU information so that Lightyear FPB can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear FPB intends to install and the services Lightyear FPB wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear FPB ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear FPB LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear FPB as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear FPB may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear FPB and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearFPB’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear FPB orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear FPB is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Access Point LMU information so that Lightyear Access Point can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Access Point intends to install and the services Lightyear Access Point wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Access Point ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Access Point LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Access Point as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Access Point may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Access Point and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearAccess Point’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Access Point orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Access Point is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) JCM LMU information so that Lightyear JCM can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear JCM intends to install and the services Lightyear JCM wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear JCM ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear JCM LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear JCM as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear JCM may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear JCM and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearJCM’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear JCM orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear JCM is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) DTM LMU information so that Lightyear DTM can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear DTM intends to install and the services Lightyear DTM wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear DTM ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear DTM LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear DTM as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear DTM may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear DTM and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearDTM’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear DTM orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear DTM is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear FTS (LMU) information so that Lightyear FTS can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear FTS intends to install and the services Lightyear FTS wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear FTS ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear FTS LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear FTS as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear FTS may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear FTS and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearFTS’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear FTS orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear FTS is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Ruddata LMU information so that Lightyear Ruddata can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Ruddata intends to install and the services Lightyear Ruddata wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Ruddata ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Ruddata LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Ruddata as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Ruddata may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Ruddata and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearRuddata’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Ruddata orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Ruddata is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) BSE LMU information so that Lightyear BSE can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear BSE intends to install and the services Lightyear BSE wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear BSE ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear BSE LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear BSE as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear BSE may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear BSE and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearBSE’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear BSE orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear BSE is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) NTBS LMU information so that Lightyear NTBS can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear NTBS intends to install and the services Lightyear NTBS wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear NTBS ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear NTBS LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear NTBS as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear NTBS may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear NTBS and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearNTBS’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear NTBS orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear NTBS is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear ATI (LMU) information so that Lightyear ATI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear ATI intends to install and the services Lightyear ATI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear ATI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear ATI LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear ATI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear ATI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear ATI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearATI’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear ATI orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear ATI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Vertex LMU information so that Lightyear Vertex can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Vertex intends to install and the services Lightyear Vertex wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Vertex ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Vertex LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Vertex as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Vertex may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Vertex and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearVertex’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Vertex orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Vertex is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear Nexus (LMU) information so that Lightyear Nexus can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Nexus intends to install and the services Lightyear Nexus wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Nexus ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Nexus LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Nexus as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Nexus may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop so long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Nexus and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearNexus’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Nexus orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Nexus is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) BSE LMU information so that Lightyear BSE can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear BSE intends to install and the services Lightyear BSE wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear BSE ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear BSE LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear BSE as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear BSE may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear BSE and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearBSE’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear BSE orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear BSE is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Solution Telecom LMU information so that Lightyear Solution Telecom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Solution Telecom intends to install and the services Lightyear Solution Telecom wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Solution Telecom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Solution Telecom LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Solution Telecom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Solution Telecom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Solution Telecom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearSolution Telecom’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Solution Telecom orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Solution Telecom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) OnePoint LMU information so that Lightyear OnePoint can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear OnePoint intends to install and the services Lightyear OnePoint wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear OnePoint ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear OnePoint LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear OnePoint as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear OnePoint may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear OnePoint and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearOnePoint’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear OnePoint orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear OnePoint is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Columbus Local LMU information so that Lightyear Columbus Local can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Columbus Local intends to install and the services Lightyear Columbus Local wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Columbus Local ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Columbus Local LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Columbus Local as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Columbus Local may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Columbus Local and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearColumbus Local’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Columbus Local orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Columbus Local is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear NTBS (LMU) information so that Lightyear NTBS can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear NTBS intends to install and the services Lightyear NTBS wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear NTBS ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear NTBS LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear NTBS as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear NTBS may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth Loop. The determination shall be made solely by Lightyear NTBS and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearNTBS’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear NTBS orders loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear NTBS is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) BAK LMU information so that Lightyear BAK can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear BAK intends to install and the services Lightyear BAK wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear BAK ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear BAK LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear BAK as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear BAK may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear BAK and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearBAK’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear BAK orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear BAK is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Think 12 LMU information so that Lightyear Think 12 can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Think 12 intends to install and the services Lightyear Think 12 wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Think 12 ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Think 12 LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Think 12 as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Think 12 may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Think 12 and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearThink 12’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Think 12 orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Think 12 is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Sail Telecom LMU information so that Lightyear Sail Telecom can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Sail Telecom intends to install and the services Lightyear Sail Telecom wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Sail Telecom ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Sail Telecom LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Sail Telecom as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Sail Telecom may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Sail Telecom and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearSail Telecom’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Sail Telecom orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Sail Telecom is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Covista LMU information so that Lightyear Covista can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Covista intends to install and the services Lightyear Covista wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Covista ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Covista LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Covista as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Covista may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Covista and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearCovista’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Covista orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Covista is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) PLI LMU information so that Lightyear PLI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear PLI intends to install and the services Lightyear PLI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear PLI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear PLI LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear PLI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear PLI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear PLI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearPLI’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear PLI orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear PLI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Hotline LMU information so that Lightyear Hotline can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Hotline intends to install and the services Lightyear Hotline wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Hotline ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Hotline LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Hotline as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Hotline may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Hotline and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearHotline’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Hotline orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Hotline is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Southern Light LMU information so that Lightyear Southern Light can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Southern Light intends to install and the services Lightyear Southern Light wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Southern Light ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Southern Light LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Southern Light as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Southern Light may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Southern Light and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearSouthern Light’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Southern Light orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Southern Light is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) FPB LMU information so that Lightyear FPB can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear FPB intends to install and the services Lightyear FPB wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear FPB ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear FPB LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear FPB as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear FPB may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear FPB and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearFPB’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear FPB orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear FPB is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Tel West LMU information so that Lightyear Tel West can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Tel West intends to install and the services Lightyear Tel West wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Tel West ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Tel West LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Tel West as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Tel West may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Tel West and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearTel West’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Tel West orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Tel West is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) SPARDI LMU information so that Lightyear SPARDI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear SPARDI intends to install and the services Lightyear SPARDI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear SPARDI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear SPARDI LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear SPARDI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear SPARDI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear SPARDI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearSPARDI’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear SPARDI orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear SPARDI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Budget Phone LMU information so that Lightyear Budget Phone can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Budget Phone intends to install and the services Lightyear Budget Phone wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Budget Phone ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Budget Phone LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Budget Phone as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Budget Phone may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Budget Phone and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearBudget Phone’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Budget Phone orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Budget Phone is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Dialogica LMU information so that Lightyear Dialogica can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Dialogica intends to install and the services Lightyear Dialogica wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Dialogica ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Dialogica LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Dialogica as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Dialogica may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Dialogica and BellSouth ▇▇▇▇▇▇▇▇▇ shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearDialogica’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Dialogica orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Dialogica is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) GSC LMU information so that Lightyear GSC can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear GSC intends to install and the services Lightyear GSC wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear GSC ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear GSC LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear GSC as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear GSC may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear GSC and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearGSC’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear GSC orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear GSC is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Big River LMU information so that Lightyear Big River can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Big River intends to install and the services Lightyear Big River wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Big River ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Big River LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Big River as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Big River may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Big River and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearBig River’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear Big River orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Big River is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) EPICUS LMU information so that Lightyear EPICUS can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear EPICUS intends to install and the services Lightyear EPICUS wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear EPICUS ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear EPICUS LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear EPICUS as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth ▇▇▇▇▇▇▇▇▇ receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear EPICUS may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear EPICUS and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee Lightyear’s EPICUS’ ability to provide advanced data services over the ordered loop type. Further, if Lightyear EPICUS orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear EPICUS is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) ICG LMU information so that Lightyear ICG can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear ICG intends to install and the services Lightyear ICG wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear ICG ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear ICG LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear ICG as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear ICG may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear ICG and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearICG’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear ICG orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear ICG is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) ACI LMU information so that Lightyear ACI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear ACI intends to install and the services Lightyear ACI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear ACI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear ACI LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear ACI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear ACI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear ACI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearACI’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear ACI orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear ACI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) NationsLink LMU information so that Lightyear NationsLink can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear NationsLink intends to install and the services Lightyear NationsLink wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear NationsLink ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear NationsLink LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- pair-gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear NationsLink as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear NationsLink may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear NationsLink and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearNationsLink’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear NationsLink orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear NationsLink is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) DPI LMU information so that Lightyear DPI can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear DPI intends to install and the services Lightyear DPI wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear DPI ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear DPI LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear DPI as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear DPI may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear DPI and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearDPI’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear DPI orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear DPI is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) Tristar LMU information so that Lightyear Tristar can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear Tristar intends to install and the services Lightyear Tristar wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear Tristar ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear Tristar LMU information consisting of the composition of the loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear Tristar as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning the loop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear Tristar may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear Tristar and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearTristar’s ability to provide advanced data services over the ordered loop type. Further, if Lightyear Tristar orders loops that do not require a specific facility medium (i.e. copper only) or loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loops) and that are not inventoried as advanced services loops, the LMU information for such loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear Tristar is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) ACN LMU information so that Lightyear ACN can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear ACN intends to install and the services Lightyear ACN wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear ACN ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) and mechanized LMU queries for preordering loop makeup LMU are likewise unique from other preordering functions with associated service inquiries (SI) SIs as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear ACN LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear ACN as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on for facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear ACN may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear ACN and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearACN’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear ACN orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear ACN is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.

Description of Service. 2.9.1.1 BellSouth shall make available to Lightyear (LMU) DSL LMU information so that Lightyear DSL can make an independent judgment about whether the Loop is capable of supporting the advanced services equipment Lightyear DSL intends to install and the services Lightyear DSL wishes to provide. This section addresses LMU as a preordering transaction, distinct from Lightyear DSL ordering any other service(s). Loop Makeup Service Inquiries (LMUSI) for preordering loop makeup Loop Make-Up are likewise unique from other preordering functions with associated service inquiries (SI) as described in this Agreement. 2.9.1.2 BellSouth will provide Lightyear DSL LMU information consisting of the composition of the loop Loop material (copper/fiber); the existence, location and type of equipment on the Loop, including but not limited to digital loop carrier or other remote concentration devices, feeder/distribution interfaces, bridged taps, load coils, pair- gain devices; the loop Loop length; the wire gauge and electrical parameters. 2.9.1.3 BellSouth’s LMU information is provided to Lightyear DSL as it exists either in BellSouth's databases or in its hard copy facility records. BellSouth does not guarantee accuracy or reliability of the LMU information provided. 2.9.1.4 BellSouth’s provisioning of LMU information to the requesting CLEC on facilities is contingent upon either BellSouth or the requesting CLEC owning controlling the loop(sLoop(s) that serve the service location for which LMU information has been requested by the CLEC. The requesting CLEC is not authorized to receive LMU information on a facility owned used or controlled by another CLEC unless BellSouth receives a Letter of Authorization (LOA) from the voice CLEC (owner) or its authorized agent on the LMUSI (Loop Makeup Service Inquiry) submitted by the requesting CLEC. 2.9.1.5 Lightyear DSL may choose to use equipment that it deems will enable it to provide a certain type and level of service over a particular BellSouth LoopLoop as long as that equipment does not disrupt other services on the BellSouth network. The determination shall be made solely by Lightyear DSL and BellSouth shall not be liable in any way for the performance of the advanced data services provisioned over said Loop. The specific Loop type (ADSL, HDSL, or otherwise) ordered on the LSR must match the LMU of the loop Loop reserved taking into consideration any requisite line conditioning. The LMU data is provided for informational purposes only and does not guarantee LightyearDSL’s ability to provide advanced data services over the ordered loop Loop type. Further, if Lightyear DSL orders loops Loops that do not require a specific facility medium (i.e. copper only) or Loops that are not intended to support advanced services (such as UV-SL1, UV-SL2, or ISDN compatible loopsLoops) and that are not inventoried as advanced services loopsLoops, the LMU information for such loops Loops is subject to change at any time due to modifications and/or upgrades to BellSouth’s network. Lightyear DSL is fully responsible for any of its service configurations that may differ from BellSouth's technical standard for the loop Loop type ordered.