Design and Construction of CID Improvements Clause Samples

Design and Construction of CID Improvements. The District and the City both hereby acknowledge that the CID Improvements are a part of the TIF Plan being undertaken pursuant to the Redevelopment Agreement. The District and City hereby further acknowledge that the Developer plans to construct the CID Improvements in accordance with the TIF Plan, the TIF Contract, and this Agreement. The District's primary role is to fund and/or assist in the funding of the CID Improvements. The District shall delegate by resolution its power to review and approve the construction of the CID Improvements to the City. The CID Improvements shall be carried out by or at the direction of Developer, subject to Applicable Laws and Requirements; the District shall have no obligation to design and construct the CID Improvements. The Developer shall comply with all Applicable Laws and Requirements including, as applicable, laws related to public bidding, the posting of bonds, prohibitions and requirements contained Chapters 67, 208, 285, 292, and 650, RSMo, and the payment of prevailing wages to contractors or subcontractors of Developer for construction of the CID Improvements. Developer shall indemnify and hold harmless the City and the District for any damage resulting to it from the failure of either Developer or its contractor or subcontractors to pay prevailing wages if legally required.
View Source
Design and Construction of CID Improvements. In order to receive reimbursements hereunder, the Developer shall design and construct the CID Improvements. Neither the District nor the City will have any obligation to design and construct the CID Improvements.
View Source
Design and Construction of CID Improvements. The CID Improvements shall be designed and constructed by or at the direction of the Developer. The CID Improvements shall be designed and constructed in accordance with applicable City-approved zoning and subdivision ordinances and associated plans and specifications. The Developer shall comply with all Applicable Laws and Requirements, including (with respect to the Public Improvements) laws related to the construction of public improvements, such as the payment of prevailing wages to contractors or subcontractors of Developer for construction of the Public Improvements and obtaining a payment bond in compliance with Section 107.170, RSMo; provided that this Agreement shall not be deemed to impose such requirements if not otherwise required by Applicable Laws and Requirements. Developer shall indemnify and hold harmless the City and the District for any damage resulting to it from failure of either Developer or its contractor or subcontractors to comply with any such requirements. Developer shall use commercially reasonable efforts to clear blight or rehabilitate to eliminate the physical blight existing within the blighted area, or make adequate provisions satisfactory to the City for the clearance of such blight, which obligation may be satisfied by performing the CID Improvements. Notwithstanding the foregoing, to the extent Developer fails to perform the CID Improvements, whether fully or partially, the sole remedy hereunder shall be that the Developer shall not be entitled to reimbursement of Reimbursable Project Costs, and in no event shall Developer be required to perform such obligations or expend money in furtherance thereof in excess of what may be reimbursed to Developer hereunder.
View Source

Related to Design and Construction of CID Improvements

  • Design and Construction In complying with the requirements of the specification both with respect to arrangement and detail, design is to conform to the best current engineering practice. Each of the several parts of the material is to be of the maker’s standard design provided that this design is in general accordance with the specification. The essence of design should be simplicity and reliability in order to give long continuous service with high economy and low maintenance cost. Particular attention should be paid to internal and external access in order to facilitate inspection, cleaning and maintenance. The design dimensions and materials of all parts are to be such that they will not suffer damage as a result of stresses under the most severe conditions. Fully detailed specifications of the several parts of the material are to be submitted describing particularly the materials to be used. The materials used in the construction of the material are to be of the highest quality and selected particularly to meet the duties required of them. Mechanisms are to be constructed to avoid sticking due to rust or corrosion. Workmanship and general finish are to be of the highest class throughout. All similar parts of the material are to be interchangeable. All equipment is to operate without undue vibration and with the least possible amount of noise and is not to cause a nuisance. All equipment is to be designed to minimize the risk of fire and any damage, which may be caused in the event of fire. The equipment is also to be designed to prevent ingress of all vermin, accidental contact with live parts and to minimize the ingress of dust and dirt. The use of materials, which may be liable to attack by termites or other insects, is to be avoided.

  • Project Construction The Contractor agrees to provide continuous on-site supervision on each Job Order, while progress on the project is being accomplished. The Contractor’s Project Manager will ensure: 1. Coordination and providing supervision to all Subcontractor and workers; 2. Posting of the prevailing wage scale; 3. Maintaining a copy of the Contractors safety program manual made available to all construction personnel; 4. Conducting weekly on-site safety meetings; 5. Completing the daily labor and construction progress log on a daily basis and submit copies to the County on a daily basis. Copies of the previous day’s reports must be submitted by 9:00AM of the following day. a. Daily labor log is to include a listing of Subcontractor(s) and a count of workers by trade providing services for the day. b. Construction progress log is to include a narrative of the Work provided by trade(s). Narrative agrees to include the various areas of the jobsite where Work was performed and any problems or conditions that were encountered. c. In the event the Contractor fails to provide a daily log and/or construction progress log, the County may impose damages against the Contractor in the amount of fifty dollars ($50.00) for each log and deduct from the Contractor’s payment request, for each day the Contractor does not provide the documentation. 6. County may suspend Contractor operations if no Contractor Superintendent is observed. All delays caused by the suspension will be the responsibility of the Contractor. No time extension or claims for cost(s) associated with the suspension will be granted by the County.

  • New Construction If this contract is for a Property that is newly constructed and the new construction option is selected, coverage begins on day one (1) of month thirteen

  • Construction of Improvements Lessee shall construct its planned facilities and install therein all necessary fixtures, equipment, and accessories, all of which shall be in accordance with the terms and conditions of this Lease and any applicable city code or FAA requirements. Lessee shall complete construction of the new improvements within one (1) year after the Effective Date of this Lease. Existing improvements shall be deemed to have been appropriately constructed so long as they are well-maintained and meet all applicable city code and FAA requirements. It is expressly understood that upon the expiration of the Lease, all hangar improvements shall become property of Lessor. 8.1 Lessee agrees to reimburse Lessor for the apportioned costs of roadway improvements including, but not limited to: excavation, paving, drainage, and fencing required for all extensions of the access road to the Leased Premises. Lessee shall be responsible for the cost of all extensions, as applicable, of all water, sewer, and other utilities to the Leased Premises, as well as any fees for obtaining service. Lessee shall be responsible for payment at the time improvements are completed. Lessee shall remit payment to Lessor within thirty (30) days from the date of invoice. 8.2 Lessee agrees to construct, at Lessee’s expense, aircraft access improvements, including without limitation driveways, taxi lanes, aprons, and ramps to its planned facility. Construction and location of the access improvements shall comply with specifications set forth by Lessor at the time of plan’s approval. Lessee understands that those portions of the constructed Airport access improvements situated outside the boundaries of the Leased Premises shall become, immediately upon their completion to Lessor’s satisfaction, the property of Lessor. All construction and any connections to the runway of any apron or taxi lane shall in addition be governed by any rules or regulations regarding Airport operations and must be approved of and overseen by Airport management. Constructed facilities shall not be occupied until access is completed and accepted by Lessor. 8.3 Upon completion of improvements, Lessee shall provide an 8 ½” x 11” site plan detailing a scaled drawing of the Leased Premises, hangar foot print, office area, parking, landscaping, and any other improvements. 8.4 The provisions provided above do not relieve Lessee from compliance with all applicable building code requirements and acquiring all necessary licenses and permits from any governmental authority. 8.5 If the aircraft hangar or other improvements on the Leased Premises are damaged or destroyed, Lessee shall do whatever is necessary to repair, rebuild, or restore the structure and other improvements to substantially the same condition existing prior to the damage or destruction within 180 days of the date of destruction. Upon written request from Lessee, Lessor may extend the 180-day timeline to the extent reasonably necessary due to conditions beyond the control of Lessee.