Design Phase Services – Contract Documents and Bid Clause Samples

Design Phase Services – Contract Documents and Bid. Depending upon the results of any EA Report, Design Phase Services may commence at Schematic or Design Development Services. Pursuant to a Design Work Authorization (“DWA”) issued by the OWNER for the Project described therein, the CONTRACTOR shall produce drawings for the Project for OWNER review and written approval, and, at a minimum, the specified following deliverables, stamped by a professional engineer licensed in the State of New York where appropriate and required by law. The following services and deliverables will not apply to every Project. Consult the DWA and written instructions from OWNER for the requirements. Alternatively, this section sets forth an expedited design process for the creation of scope of work delineations called “Scoping Documents” may not involve the practice of professional architecture nor engineering. Scoping Documents may only be used where no building permit is required to implement the scope of work delineation, such as for minor alterations or ordinary repairs. Scoping Documents are intended to provide efficiency in situations where traditional designs stamped by a design professional are not required. The CONTRACTOR shall provide design documentation and deliverables as directed by OWNER, which may include some or all of the tasks set forth below. Such documentation shall be provided as required for the installation as directed by the OWNER of a range of projects including, but not limited to: -Maintenance – Minor Equipment, Controls, Devices and Upgrades -Capital – Minor Miscellaneous Modifications – Equipment, Controls, Devices and Upgrades -Capital – Intensive Modifications – Design/Construction Management Build -Design/Build 1. Preschematic and/or Schematic Services Preschematic and/or Schematic Services shall be performed by the CONTRACTOR as set forth in “Requirements of the DWA” section below.
View Source

Related to Design Phase Services – Contract Documents and Bid

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Construction Documents Phase Services 3.4.1 Based on the Owner’s approval of the Design Development Documents, and on the Owner’s authorization of any adjustments in the Project requirements and the budget for the Cost of the Work, the Architect shall prepare Construction Documents for the Owner’s approval. The Construction Documents shall illustrate and describe the further development of the approved Design Development Documents and shall consist of Drawings and Specifications setting forth in detail the quality levels and performance criteria of materials and systems and other requirements for the construction of the Work. The Owner and Architect acknowledge that, in order to perform the Work, the Contractor will provide additional information, including Shop Drawings, Product Data, Samples and other similar submittals, which the Architect shall review in accordance with Section 3.6.4.

  • Construction Contract Documents The Construction Contract Documents shall consist of the plans and specifications prepared by the Engineer, and any addenda and change orders thereto, and the Owner-Contractor Agreement, all of which shall be compatible and consistent with this Agreement.

  • Interconnection Customer Drawings Within one hundred twenty (120) days after the date of Initial Operation, unless the Interconnection Parties agree on another mutually acceptable deadline, the Interconnection Customer shall deliver to the Transmission Provider and the Interconnected Transmission Owner final, “as-built” drawings, information and documents regarding the Customer Interconnection Facilities, including, as and to the extent applicable: a one-line diagram, a site plan showing the Customer Facility and the Customer Interconnection Facilities, plan and elevation drawings showing the layout of the Customer Interconnection Facilities, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Interconnection Customer's step-up transformers, the facilities connecting the Customer Facility to the step-up transformers and the Customer Interconnection Facilities, and the impedances (determined by factory tests) for the associated step-up transformers and the Customer Facility. As applicable, the Interconnection Customer shall provide Transmission Provider and the Interconnected Transmission Owner specifications for the excitation system, automatic voltage regulator, Customer Facility control and protection settings, transformer tap settings, and communications.

  • Contract Documents This Contract consists of these Terms and Conditions and the documents ("Exhibits") listed below in descending order of precedence. A conflict in these documents shall be resolved in the priority listed below with these Terms and Conditions taking precedence over all other documents. The Exhibits to this Contract include the following documents: