Designs etc Sample Clauses

The "Designs etc" clause defines the ownership, use, and rights associated with any designs, drawings, specifications, or similar intellectual property created or used in connection with a contract. Typically, this clause clarifies whether the client or the contractor retains rights to the designs, and may specify conditions for their use, reproduction, or modification. For example, it might state that all design documents produced during a project become the property of the client, or that the contractor retains copyright but grants the client a license to use them. The core function of this clause is to prevent disputes over intellectual property by clearly allocating rights and responsibilities regarding design materials.
Designs etc. The Promoter/Transferor shall construct the Bungalow in accordance with the plans and designs approved by the authorities concerned and as per the specifications and particulars of construction contained in Schedule 11. The Allottee/Transferee has seen and inspected the site, Sanctioned Plans and the specifications of the Bungalow and accepted the Payment Schedule, floor plans, layout plans annexed along with this Agreement which has been approved by the competent authority. The Promoter/Transferor shall develop the Project in accordance with the said Sanctioned Plans and specifications. Subject to the terms in this Agreement, the Promoter/Transferor undertakes to strictly abide by such plans approved by the competent Authorities and shall also strictly abide by the bye-laws, FAR and density norms and provisions prescribed by the Applicable Laws and shall not have an option to make any variation in such plans, other than in the manner provided under the Applicable Laws, and breach of this term by the Promoter/Transferor shall constitute a material breach of the Agreement.
View SourceView Similar (7)
Designs etc. Upon completion or cancellation of this order, Seller shall return all designs, drawings, and blueprints (Artwork) that are furnished by the City for the production of the goods. Artwork shall not be used by the Seller in the production of materials for any third party without express written consent of the City. Artwork involves valuable property rights of City and shall be held confidential by Seller.
View SourceView Similar (2)
Designs etc. 7.1 Where the goods are supplied by the Seller in accordance with the Buyer’s instructions, specifications or drawings, the Buyer shall indemnify the Seller against all costs, claims, damages and expenses to which the Seller may become liable as a result of the infringement or the alleged infringement of any patent, registered design or any other intellectual property right. 7.2 The Seller shall not be liable to compensate the Buyer in respect of any claim for infringement of letters patent, registered design or copyright by the use or sale of any article or material supplied by the Seller to the Buyer in any case where the Buyer has not followed any instruction furnished or given by the Seller, or to the use of such article or material in a manner or for a purpose or in a country not specified or disclosed to the Seller, or to any infringement which is due to the use of such article or material in association or combination with any other article or material not supplied by the Seller. Nor shall the Seller be liable to compensate the Buyer unless the Buyer gives to the Seller the earliest possible notice in writing of any claim being made or action threatened or brought against the Buyer, and permits the Seller at the Buyer’s expense to conduct any litigation that may ensure and all negotiations for a settlement of the claim. 7.3 The Buyer shall not divulge to any third party any of the Seller’s designs, drawings, specifications or other information which may be or come into the Buyer’s possession in relation to the contract. 7.4 The copyright, design, right and any other intellectual property rights in any designs, drawings, moults, fabrications or other materials produced by the Seller shall be and remain the property of the Seller.
View Source
Designs etc. All designs and other intellectual property embodied in ▇▇▇▇’▇ products or in any drawings or other documents provided by ▇▇▇▇ pursuant to this Contract shall remain the exclusive property of ▇▇▇▇ and shall be maintained in strict confidence by Buyer, but Buyer is hereby granted a non-exclusive license to use the same solely to install, maintain, operate and repair the ▇▇▇▇ products purchased pursuant to this Contract.
View Source
Designs etc. The Owner shall construct the Apartment in accordance with the plans and designs approved by the authorities concerned and as per the specifications and particulars of construction contained in Schedule 13. The Allottee has seen and inspected the site, Sanctioned Plans and the specifications of the Apartment and accepted the Payment Schedule, floor plans, layout plans annexed along with this Agreement which has been approved by the competent authority. The Owner shall develop the Project in accordance with the said Sanctioned Plans and specifications. Subject to the terms in this Agreement, the Owner undertakes to strictly abide by such plans approved by the competent Authorities and shall also strictly abide by the bye-laws, FAR and density norms and provisions prescribed by the Applicable Laws and shall not have an option to make any variation in such plans, other than in the manner provided under the Applicable Laws, and breach of this term by the Owner shall constitute a material breach of the Agreement.
View Source

Related to Designs etc

  • Models The Purchaser acknowledges that the model homes, if any, are for display purposes only, and that some or all of the features contained therein may not be included in the Dwelling unless same is specifically provided for in any schedule forming part of this Agreement. The Purchaser acknowledges and accepts that the Vendor will be maintaining the model home or homes or sales offices and all advertising signs associated therewith for sale purposes until all homes in this subdivision and/or the adjacent subdivisions built by the Vendor or its affiliated corporations have been constructed, sold and occupied. The Purchaser acknowledges that the lot dimensions illustrated on the proposed plan of subdivision (if not registered) are approximate and may be varied in accordance with the requirements of the Vendor or the Municipality. The Purchaser further acknowledges that the lot dimensions illustrated on various plans, brochures or other marketing materials displayed in the sales office or elsewhere are approximate and it is suggested that the Purchaser refer to the actual dimensions of the subject lot as noted on the proposed plan of subdivision subject to the foregoing. The Purchaser acknowledges that if the Property being purchased herein has been used by the Vendor as a model home or inventory to the Vendor, then there will be wear and tear in the Property which the Purchaser accepts and the Purchaser acknowledges that he/she is purchasing this Property on an “as is” basis including without limiting the generality thereof existing nicks, dents, scratches, scuff marks on all hardwood areas, stairs, pickets, ▇▇▇▇▇▇▇▇, risers, treads, all trim work doors, jambs, baseboards/casings, wear and tear on carpet, existing paint touch-up blemishes, existing chips and scratches on ceramics and grout areas, wear and tear and scuff marks on all counters and tubs and agrees that the Vendor shall not be responsible either directly or indirectly (including by way of claim pursuant to the legislation relating to the Tarion warranties) to clean, repair or replace any part of the Property including wall covering, carpeting, vinyl/ceramic/hardwood flooring, cabinetry, window treatments, trees, shrubs or other planting materials, interlocking walkways and/or slab walkways, or any other features or extras on the Property either before or after closing unless specifically set out in this Agreement of Purchase and Sale. The Purchaser acknowledges that the life time line of the exterior brick work, shingles, windows and doors seals commenced at the time the model home was built and the Builder’s warranties have expired and the Builder’s warranties on the air conditioner and humidifier ( Mechanical Units) have expired and agrees that the Vendor shall not be responsible either directly or indirectly (including by way of claim pursuant to the legislation relating to the Tarion warranties) for any warranty claim for same. All appliances, including but not limited to the air conditioner and humidifiers (Mechanical Units), and fixtures included in the purchase price are purchased in an “as is” condition.

  • Application of Funding Techniques to Programs 6.3.1 The State shall apply the following funding techniques when requesting Federal funds for the component cash flows of the programs listed in sections 4.2 and 4.3 of this Agreement. 6.3.2 Programs Below are programs listed in Section 4.2 and Section 4.3.

  • Schematic Design Phase 1.2.1 Based on the mutually agreed upon Program of Requirements, Amount Available for the Construction Contract and the Project Schedule, the Architect/Engineer shall prepare sufficient alternative approaches utilizing BIM for design and construction of the Project to satisfy Owner’s project requirements and shall, at completion of this phase, submit Schematic Design Documents derived from the model in accordance with the BIM Execution Plan, “Facility Design Guidelines” and any additional requirements set forth in Article 15. The Architect/Engineer shall review alternative approaches to design and construction for the Project as they are being modeled at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by the Owner within the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Schematic Design. The Architect/Engineer shall provide the Construction Manager with a compact disc containing documents and data files derived from the model to assist the Construction Manager in fulfilling its responsibilities to the Owner. 1.2.2 Architect/Engineer shall provide all services necessary to perform the services of this phase (preparation of model(s), relevant data, decision support model views and Schematic Design Documents) including, without limitation, unless otherwise approved by Owner, the preparation and prompt delivery of all items specified in the BIM Execution Plan and “Facility Design Guidelines”. 1.2.3 Architect/Engineer shall work closely with Owner in preparation of schematic drawings and shall specifically conform to Owner’s requirements regarding aesthetic design issues. 1.2.4 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments. 1.2.5 Before proceeding into the Design Development Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Schematic Design documents and approval of the Architect/Engineer’s preliminary Estimated Construction Cost and schedule. 1.2.6 The Architect/Engineer shall participate in a final review of the Schematic Design Documents and model(s) with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Schematic Design Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments, any of which may be appealed for good cause.

  • Schematic Design See Section 2, Part 1, Article 2.1.4, Paragraph 2.1.4.2.