DOORS AND FRAMES Clause Samples
DOORS AND FRAMES. 8.1 Internal doors to be hollow core, steel frames with enamel paint.
8.2 Entrance door to be Aluminium Sliding doors 8.3 Storeroom door Aluminium. 8.4 2 lever locks to internal doors.
DOORS AND FRAMES. 8.1 All external doors to be anodized aluminium framed doors with 6.38 mm safety glass insert panels. Colour as per architect`s door schedules. All external doors to have a 30mm weather strip. All external doors are to be of Aluminium with suitable safety glass panels (laminated glass) – Vinyl strip to be installed as per developer`s approval. Weather mechanism to be fitted to external doors.
8.2 Al internal door frames are to be standard aluminium door frames. Size and thickness according to architects’ drawings. All internal doors to be semi-solid ▇▇▇▇▇▇ doors with a height of 2100mm. garage doors
8.3 The garage doors to be confirmed at a later stage - (not WISPECO garage doors)
8.4 Garage door motor is included, but is available as an optional extra.
DOORS AND FRAMES. 22.6.1 All external doors to anodized aluminum framed doors with 6.38 mm safety glass. Insert Panels. Color as per architect`s door schedules.
22.6.2 All external doors to have minimum 10mm weather step.
22.6.3 All doors are to be semi-solid ▇▇▇▇▇▇ doors with a height of 2100mm.
22.6.4 Garage Doors to be white powder coated aluminum sectional overhead type door with a block pattern. Garage Doors be ‘horizontal slide over’ electrically operated, sectional corrosive resistant with a 'Chromadek' finish, remote controlled, or similar approved.
DOORS AND FRAMES. 8.1 All external doors to be natural anodized aluminium framed doors with 6.38 mm safety glass insert panels. (all as per AAMSA). Colour as per architect`s door schedules. All external doors to have 30mm weather step. Weather bar mechanism to be fitted to all external swing doors.
8.2 All interior door frames to be 100x50 hardwood timber frames. All doors are to be semi-solid ▇▇▇▇▇▇ doors with a height of 2030mm.
8.3 Garage Doors to be galvanized, pressed, colour impregnated sectional-overhead garage doors. (Supplier for standard doors to be confirmed) Electronically operated, mechanized garage door motor included.
DOORS AND FRAMES. 3'-0" x 7-0'x 1-3/4", solid core, birch, B-3 stain prefinished with anodized aluminum frames or prefinished black (Timely) steel frames.
DOORS AND FRAMES. Exterior service door(s) and frame(s) shall be hollow metal.
DOORS AND FRAMES. All frames will be made of ▇▇▇ ▇▇▇▇. All doors will be flush doors with one Tour Bolt and one handle.
DOORS AND FRAMES. IF DOORS AND FRAMES ARE TO BE REUSED FOR THIS WORK, CAREFULLY REMOVE DOORS FROM FRAMES AND REMOVE FRAMES FROM OPENING, TAKING CARE TO AVOID DAMAGE. REMOVE HARDWARE, CLEAN REFURBISH, AND STORE FOR REINSTALLATION REPAIR AND REWORK FRAMES AND DOORS AS REQUIRED FOR REINSTALLATION WHERE INDICATED. FOR DOORS AND FRAMES TO BE SALVAGED, CAREFULLY REMOVE FROM OPENING AND DELIVER FOR STORAGE WHERE DIRECTED.
DOORS AND FRAMES. Solid core 9' height wood veneer doors, frames and entrances conforming to Building standards.
DOORS AND FRAMES a. Corridor entrance door shall be single swing, 3'0" x 7'0" x 1-3/4" thick, solid core oak doors with hardwood frames. One (1) glass panel door inset is included.
b. Secondary exit door shall be single swing oak solid core doors, 3'0" x 7'0" x 1-3/4" thick, with hardwood frames.
c. Interior office doors shall be single swing oak solid core doors, 3'0" x 1-3/4".