Exceptions and Additions Clause Samples

The "Exceptions and Additions" clause defines specific circumstances where the general terms of an agreement do not apply, or where extra provisions are introduced. In practice, this clause lists particular scenarios, parties, or obligations that are either exempt from certain requirements or subject to additional rules beyond the standard contract terms. Its core function is to provide flexibility and customization within the contract, ensuring that unique situations or negotiated points are clearly addressed and do not create ambiguity or unintended obligations.
Exceptions and Additions. This letter of understanding shall not apply to classifications of non-regular faculty employees in the bargaining unit who do not perform work normally done by regular faculty bargaining unit members, as defined by the collective agreement. (For example, substitutes, continuing education instructors, and instructional/faculty assistants). Additionally, qualification-based differences in pay are excluded from the scope of this committee work. In addition to non-regular employees, this letter of understanding shall apply to the following regular employee groups only: i. Selkirk College: Regular faculty being paid according to on-line courses (▇▇▇ #7). ii. Any other regular faculty groups that the parties mutually agree.
View SourceView Similar (5)
Exceptions and Additions. This letter of understanding shall not apply to classifications of non-regular faculty employees in the bargaining unit who do not perform work normally done by regular faculty bargaining unit members, as defined by the collective agreement. (For example, substitutes, continuing education instructors, and instructional/faculty assistants). Additionally, qualification-based differences in pay are excluded from the scope of this committee work. In addition to non-regular employees, this letter of understanding shall apply to the following regular employee groups only: i. Coast Mountain College: Part-time faculty < 50% ii. Selkirk College: Regular faculty being paid according to on-line courses (▇▇▇ #7rate E). iii. Any other regular faculty groups that the parties mutually agree.
View SourceView Similar (2)
Exceptions and Additions. With the acceptance of this proposal ▇▇▇▇▇▇ Applied is pleased to make you a preferred contract customer. As a preferred contract customer Daikin Applied offers you the following: ➢ A discounted rate of list -10% on labor outside the scope of this contract ➢ A discounted rate of list -10% on Daikin parts ➢ Priority service over non-contract customers Daikin reventive Maintenance Agreement Pricing and Acceptance: People and ideas you can trust.™ ▇▇▇▇ ▇▇▇▇▇▇▇▇ Site Address: Lewiston ▇▇▇▇▇▇ Central Schools ▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇ Youngstown, NY 14174 Daikin reventive Maintenance Agreement This Service Agreement consists of the pages beginning with the title page entitled “Daikin Preventive Maintenance Agreement,” the consecutively numbered pages immediately following such title page, and includes and ends with the Daikin Applied Terms and Conditions. Daikin Applied agrees to inspect and maintain the Covered Equipment hereof according to the terms of this Service Agreement, including the “Terms and Conditions,” and “Scope of Services” sections hereof. ▇▇▇▇▇▇ Applied agrees to give preferential service to Customer over non-contract customers. Magnetic Bearing Chiller: $4290.00 annually The initial term of this Service Agreement shall be one (1) year, effective 3/1/2018 provided that Daikin Applied will have no obligation to Customer prior to execution of this Service Agreement in the space provided below by an authorized representative of Daikin Applied. Following expiration of the initial term on 2/28/2019, this Agreement shall renew automatically for successive periods of 1 year until terminated as provided herein.
View Source
Exceptions and Additions. The following is a complete list of exceptions and additions to the above statements. a. Matters contained in the Title Commitment. b. Rights, restrictions, conditions, agreements and easements that appear of record. c. Lawsuits arising in the course of operating the business of the Corporation.
View Source

Related to Exceptions and Additions

  • ALTERATIONS AND ADDITIONS A. Tenant's Alterations: Tenant shall not make, or suffer to be made, any alteration or addition to the Premises ("Alterations"), or any part thereof, without obtaining Landlord's prior written consent and delivering to Landlord the proposed architectural and structural plans for all such Alterations at least fifteen (15) days prior to the start of construction. If such Alterations affect the structure of the Building, Tenant additionally agrees to reimburse Landlord its reasonable out-of-pocket costs incurred in reviewing Tenant's plans. After obtaining Landlord's consent, which consent shall state whether or not Landlord will require Tenant to remove such Alteration at the expiration or earlier termination of this Lease, Tenant shall not proceed to make such Alterations until Tenant has obtained all required governmental approvals and permits. Tenant agrees to provide Landlord (i) written notice of the anticipated and actual start-date of the work, (ii) a complete set of half-size (15" X 21") vellum as-built drawings, and (iii) a certificate of occupancy for the work upon completion of the Alterations. All Alterations shall be constructed in compliance with all applicable building codes and laws including, without limitation, the Americans with Disabilities Act of 1990 as amended from time to time. Upon the Expiration Date, all Alterations, except movable furniture and trade fixtures, shall become a part of the realty and belong to Landlord but shall nevertheless be subject to removal by Tenant as provided in Section 6 above. Alterations which are not deemed as trade fixtures include heating, lighting, electrical systems, air conditioning, walls, carpeting, or any other installation which has become an integral part of the Premises (excepting backup power generators or a UPS system, which Tenant shall have the right to remove). All Alterations shall be maintained, replaced or repaired by Tenant at its sole cost and expense. Notwithstanding the foregoing, Tenant shall be entitled, without obtaining Landlord's consent, to make Alterations which do not affect the structure of the Building and which do not cost more than Seventy Thousand Dollars ($70,000.00) per Alteration ("Permitted Alterations"); provided, however, that: (i) Tenant shall still be required to comply with all other provisions of this paragraph; and (ii) such Permitted Alterations are subject to removal by Tenant at Landlord's election pursuant to Section 6.C. above at the expiration or earlier termination of the Lease.

  • Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.

  • Exceptions and Limitations For the avoidance of doubt, where Exceptions and Limitations apply to Your use, this Public License does not apply, and You do not need to comply with its terms and conditions.

  • Additions and Alterations 12 ARTICLE 9

  • Alterations and Attachments Student and Parent may not make any alterations in or add attachments, hardware, or software to the mobile device computer absent express permission from M-DCPS, which permission is at the sole option of M-DCPS.