Final Configuration Clause Samples

The Final Configuration clause establishes the definitive version of a product, system, or service as agreed upon by the parties at a specified point in the contract. It typically details the exact specifications, features, or components that will be delivered, and may reference attached documents or drawings for clarity. This clause ensures both parties have a clear, mutual understanding of what constitutes the completed deliverable, thereby reducing the risk of disputes over scope or quality at the time of delivery.
Final Configuration. The Aircraft configuration will be completed using [***]. Boeing and Customer will incorporate certain other configuration changes into the Aircraft as such changes are offered by [***] and accepted by [***] (Final Configuration) in accordance with the following schedule: 1.2.1 No later than [***], Boeing and Customer will meet to discuss potential optional features. 1.2.2 Within [***] after that meeting, Boeing will provide Customer with a proposal for those optional features that can be incorporated into the Aircraft during production. 1.2.3 Customer will then have [***] to accept or reject the optional features.
View SourceView Similar (4)
Final Configuration. The Table 1C 737-10 Model Aircraft configuration will be completed using the Boeing then- current basic model aircraft configuration documentation applicable to the Table 1C 737-10 Model Aircraft. Boeing and Customer will incorporate certain other configuration changes into the Table 1C 737-10 Model Aircraft as such changes are offered by Boeing and accepted by Customer (Final Configuration) in accordance with the following schedule: 1.2.1 [*CTR] Boeing and Customer will meet to discuss potential optional features. 1.2.2 [*CTR] with a proposal for those optional features that can be incorporated into the Table 1C 737-10 Model Aircraft during production. 1.2.3 [*CTR] the optional features.
View Source
Final Configuration. The 787-*** Aircraft configuration will be completed using the Boeing then-current basic model 787-*** applicable to the 787-*** Aircraft. Boeing and Customer will incorporate certain other configuration changes into the 787-*** Aircraft as such changes are *** (Final Configuration) in accordance with the following schedule: 1.2.i Boeing and Customer will meet to discuss *** features. 1.2.ii Boeing *** into the 787-*** Aircraft during production. 1.2.iii Customer will *** or *** the *** features. 1.2.iv If Customer fails to meet any particular deadline for an Aircraft, such failure *** of the Purchase Agreement provided that Customer promptly contacts Boeing to ***.
View Source
Final Configuration. The Slide Aircraft configuration will be completed using the Boeing then-current basic model aircraft configuration documentation applicable to the Slide Aircraft. Boeing and Customer will incorporate certain other configuration changes into the Slide Aircraft as such changes are offered by Boeing and accepted by Customer (Final Configuration) in accordance with the following schedule: 1.3.1 Within [***]) days of Boeing and Customer signing this Letter Agreement, Boeing and Customer will meet to discuss optional features, including economy seats and IFE (Customer Configuration Changes); 1.3.2 Within [***] days after that meeting, Boeing will provide Customer with a proposal for Customer Configuration Changes that can be incorporated into the Slide Aircraft during production. Such proposal will include Boeing and supplier costs incurred to date necessary to incorporate certain optional features into the [***] aircraft should such optional features be changed or removed from the aircraft configuration as the result of the revision to the delivery dates of each aircraft; and 1.3.3 Customer will then have [***] days, and in no event longer than [***], to accept or reject the Customer Configuration Changes.
View Source
Final Configuration. SIX (6) RRU SIX (6) RAYCAPS SIX (6) ANTENNAS SIX (6) 1 5/8” COAX TWO (2) 1 5/8” HYBRID CABLES (TO BE SHRINK WRAPPED TO MATCH TANK COLOR) 1. ANSI/ TIA-222-G: Structural Standard for Antenna Supporting Structures and Antennas a. Section 15: Existing Structures 2. ASCE/ SEI 7: Minimum Design Loads for Buildings and other Structures a. Section 15.7.7: Water Storage and Water Treatment Tanks and Vessels 3. ANSI/AWWA D100: Welded Carbon Steel Tanks for Water Storage a. Appendix A.5.6: Antennas and Related Equipment 4. ANSI/AWWA D103: Factory-Coated Bolted Carbon Steel Tanks for Water Storage A rigorous structural analysis, with calculations, of the entire structure using design loads appropriate for the geographical area per the latest applicable standards and local codes. The analysis must determine the overall stability and show the actual versus allowable stresses for the structural members and connections including anchor bolts, wind rods, columns and struts. In addition, local stresses should be evaluated at the antenna supports attachment points. Analysis must include fully loaded corral if applicable. 1. Size of Tank (Capacity in gallons) 2. Style of Tank (Elevated, Pedisphere, Composite etc.) 3. Total number of posts if corral installation and number of coax 4. Total number of posts, antennas and coax if balcony installation 5. Diameter of Tank bowl and balcony 6. Total Tank height 7. Balcony height 8. List of all equipment installed on tank. To include Model Numbers, Dimensions and Weight 9. Type of analysis (feasibility or rigorous) 10. Design Loading Criteria: Occupancy Category, Applicable Load Cases (Wind, Ice, Seismic, etc.) and Controlling Load Combinations 11. Results of analysis 12. Proposed reinforcement of existing members and/or connections and all proposed additional members where needed 13. Sources of Data: Previous Structural Analysis, Fabrication Drawings, Field mapping, As-Built Drawings, Geotechnical Reports, etc.
View Source

Related to Final Configuration

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

  • AIRCRAFT CONFIGURATION The guarantees defined below ("the Guarantees") are applicable to the A330-200 Aircraft as described in the Technical Specification ***, as amended by the Specification Change Notices ("SCN's") for:

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • Contract Deliverables The Contractor shall provide information technology staff augmentation services, including comprehensive management of staff, as set forth in this Contract. The term “staff” refers to the temporary staff provided by the Contractor to render information technology services identified by Customers, but that staff shall not be deemed an employee of the State or deemed to be entitled to any benefits associated with such employment. Contracts resulting from this solicitation should not be structured as fixed-price agreements or used for any services requiring authorization for payment of milestone tasks. Contractor shall only provide information technology staff augmentation services for those Job Titles awarded to the Contractor and shall be paid on an hourly basis. The Department’s intent is for Contractor’s information technology staff to provide services closely related to those described in the Job Family Descriptions document. Detailed scopes of work, specific requirements of the work to be performed, and any requirements of staff shall be provided by the Customer in a Request for Quote. The Contractor shall possess the professional and technical staff necessary to allocate, outsource, and manage qualified information technology staff to perform the services requested by the Customer. The Contractor shall provide Customers with staff who must have sufficient skill and experience to perform the services assigned to them. All of the information technology staff augmentation services to be furnished by the Contractor under the Contract shall meet the professional standards and quality that prevails among information technology professionals in the same discipline and of similar knowledge and skill engaged in related work throughout Florida under the same or similar circumstances. The Contractor shall provide, at its own expense, training necessary for keeping Contractor’s staff abreast of industry advances and for maintaining proficiency in equipment and systems that are available on the commercial market. The Contractor shall be responsible for the administration and maintenance of all employment and payroll records, payroll processing, remittance of payroll and taxes, and all administrative tasks required by state and federal law associated with payment of staff. The Contractor shall, at its own expense, be responsible for adhering to the Contract background screening requirements, testing, evaluations, advertising, recruitment, and disciplinary actions of Contractor’s information technology staff. The Contractor shall maintain during the term of the Contract all licenses, permits, qualifications, insurance and approvals of whatever nature that are legally required to perform the information technology staff augmentation services.

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.