Front fog Sample Clauses
The 'Front fog' clause defines the requirements and standards for the use or installation of front fog lights on vehicles. Typically, this clause specifies when front fog lights may be used, such as during conditions of poor visibility like fog, heavy rain, or snow, and may outline technical specifications regarding their brightness, color, and positioning on the vehicle. Its core practical function is to enhance road safety by ensuring that front fog lights are used appropriately, thereby improving visibility for drivers in adverse weather conditions and reducing the risk of accidents.
Front fog lamps approved under this Regulation shall be so manufactured as to conform to the type approved by meeting the requirements set forth in paragraphs 6. and 7. of this Regulation and in Annex 7.
Front fog lamps of different types" are front fog lamps that differ in such essential respects as:
1.4.1. The trade name or ▇▇▇▇:
(a) Lamps bearing the same trade name or ▇▇▇▇ but produced by different manufacturers shall be considered as being of different types;
(b) Lamps produced by the same manufacturer differing only by the trade name or ▇▇▇▇ shall be considered as being of the same type.
1.4.2. Different "Classes" (B or F3) identified by particular photometric provisions;
1.4.3. The characteristics of the optical system; (basic optical design, type/category of light source, LED module, etc.);
1.4.4. The inclusion of components capable of altering the optical effects by reflection, refraction, absorption and/ or deformation during operation and the variable intensity control, if any;
1.4.5. The category of filament lamp(s) used, as listed in UN Regulation No. 37, UN Regulation No. 99 and/or the LED module specific identification code(s) (if applicable);
1.4.6. However, a device intended for the installation on the left side of the vehicle and the corresponding device intended for the installation of the right side of the vehicle shall be considered to be of the same type.
Front fog lamps of different types" are front fog lamps that differ in such essential respects as:
1.4.1. The trade name or mark;
1.4.2. Different "Classes" (B or F3) identified by particular photometric provisions;
1.4.3. The characteristics of the optical system; (basic optical design, type / category of light source, LED module, DLS etc.);
1.4.4. The inclusion of components capable of altering the optical effects by reflection, refraction, absorption and/ or deformation during operation and the variable intensity control, if any;
1.4.5. The category of filament lamp(s) used, as listed in Regulation No. 37 , Regulation No. 99 and/or the LED module or light generator specific identification code (s) (if applicable);
1.4.6. However, a device intended for the installation on the left side of the vehicle and the corresponding device intended for the installation of the right side of the vehicle shall be considered to be of the same type.