Functionality Limitations Sample Clauses

The Functionality Limitations clause defines the boundaries of what a product, service, or software is expected to do, explicitly stating any features or capabilities that are not included or guaranteed. In practice, this clause may clarify that certain functionalities, such as compatibility with third-party systems or uninterrupted service, are not promised by the provider. By setting clear expectations about what is and is not covered, this clause helps prevent misunderstandings and limits the provider’s liability for issues outside the defined scope of functionality.
POPULAR SAMPLE Copied 1 times
Functionality Limitations. The Markforged Technology consists of commercial professional tools intended to be used by trained professionals only. The Markforged Technology is intended only to assist Customer with Customer’s design, analysis, simulation, estimation, testing and/or other activities and are not a substitute for Customer’s own independent design, analysis, simulation, estimation, testing, and/or other activities, including those with respect to product stress, safety and utility. Due to the large variety of potential applications for the Markforged Technology, the Markforged Technology has not been tested in all situations under which it may be used. MARKFORGED WILL NOT BE LIABLE IN ANY MANNER WHATSOEVER FOR THE RESULTS OBTAINED THROUGH USE OF THE MARKFORGED TECHNOLOGY.
View SourceView Similar (4)
Functionality Limitations. Computer-aided design software and other technical software are tools intended to be used by trained professionals only. They are not substitutes for Customer’s professional judgment. Computer-aided design software and other technical software are intended to assist with product design and are not substitutes for independent design analysis, estimation or testing for product stress, safety and utility. Due to the large variety of potential applications for the Software, the Software has not been tested in all situations under which it may be used. TOPSUN shall not be liable in any manner whatsoever for the results obtained through the use of the Software. Persons using the Software are responsible for the supervision, management and control of the Software. This responsibility includes, but is not limited to, the determination of appropriate uses for the Software and the selection of the Software and other programs to achieve intended results. Persons using the Software are also responsible for establishing the adequacy of independent procedures for testing the reliability and accuracy of any program output, including all items designed by using the Software.
View SourceView Similar (2)
Functionality Limitations. The limited version of the Software pursuant to a Free License has functionality limitations. For full functionality of the Software, Licensee must purchase either a Professional/Commercial License or Professional/Academic License.
View SourceView Similar (2)
Functionality Limitations. The Supplier Software, documentation and services are commercial professional tools intended to be used by trained professionals only. Particularly in the case of commercial professional use, the Supplier Software, documentation and services are not a substitute for your professional judgment or independent testing. The Supplier Software, documentation and services are intended only to assist you with design, analysis, simulation, estimation, testing and/or other activities and are not a substitute for your own independent design, analysis, simulation, estimation, testing, and/or other activities, including those with respect to product stress, safety and utility. Due to the large variety of potential applications for the Supplier Software, documentation and services, the Supplier Software, documentation and services have not been tested in all situations under which they may be used. Supplier will not be liable in any manner whatsoever for the results obtained through use of the Supplier Software, documentation and services. Person using the Supplier Software, documentation and services are responsible for the supervision, management, and control of the Supplier Software, documentation and services and the results of using the Supplier Software, documentation and services. This responsibility includes, without limitation, the determination of appropriate uses for the Supplier Software, documentation and services and the selection of the Supplier Software, documentation and services and other computer programs and materials to help achieve intended results. Person using the Supplier Software, documentation and services are also responsible for establishing the adequacy of independent procedures for testing the reliability, accuracy, completeness, and other characteristics of any output of the Supplier Software, documentation and services, including, without limitation, all items designed with the assistance of the Supplier Software, documentation and services. You further acknowledges and agrees that the Software form part of your total unique hardware and software environment to deliver specific functionality, and that the Supplier Software, documentation and services provided by Supplier may not achieve the results you desires within your design, analysis, simulation, estimation, and/or testing constraints.
View Source
Functionality Limitations. COMPUTER-AIDED DESIGN SOFTWARE AND OTHER TECHNICAL SOFTWARE ARE TOOLS INTENDED TO BE USED BY TRAINED PROFESSIONALS ONLY. THEY ARE NOT SUBSTITUTES FOR PROFESSIONAL JUDGMENT. COMPUTER-AIDED DESIGN SOFTWARE AND OTHER TECHNICAL SOFTWARE ARE INTENDED TO ASSIST WITH PRODUCT DESIGN AND ARE NOT SUBSTITUTES FOR INDEPENDENT TESTING OF PRODUCT STRESS, SAFETY AND UTILITY. DUE TO THE LARGE VARIETY OF POTENTIAL APPLICATIONS FOR THE SOFTWARE, THE SOFTWARE HAS NOT BEEN TESTED IN ALL SITUATIONS UNDER WHICH IT MAY BE USED. AUTODESK SHALL NOT BE LIABLE IN ANY MANNER WHATSOEVER FOR THE RESULTS OBTAINED THROUGH THE USE OF THE SOFTWARE. PERSONS USING THE SOFTWARE ARE RESPONSIBLE FOR THE SUPERVISION, MANAGEMENT AND CONTROL OF THE SOFTWARE. THIS RESPONSIBILITY INCLUDES, BUT IS NOT LIMITED TO, THE DETERMINATION OF APPROPRIATE USES FOR THE SOFTWARE AND THE SELECTION OF THE SOFTWARE AND OTHER PROGRAMS TO ACHIEVE INTENDED RESULTS. PERSONS USING THE SOFTWARE ARE ALSO RESPONSIBLE FOR ESTABLISHING THE ADEQUACY OF INDEPENDENT PROCEDURES FOR TESTING THE RELIABILITY AND ACCURACY OF ANY PROGRAM OUTPUT, INCLUDING ALL ITEMS DESIGNED BY USING THE SOFTWARE. Educational Versions. WORK PRODUCT AND OTHER DATA CREATED WITH EDUCATIONAL PRODUCTS CONTAINS CERTAIN NOTICES AND LIMITATIONS THAT MAKE THE DATA UNUSABLE OUTSIDE THE EDUCATIONAL USE AREA. IF YOU COMBINE OR LINK DATA CREATED WITH THE SOFTWARE WITH DATA OTHERWISE CREATED, THEN SUCH OTHER DATA MAY ALSO BE AFFECTED BY THESE LIMITATIONS.
View Source
Functionality Limitations. The Licensed Software consists of commercial professional tools intended to be used by trained professionals only. Particularly in the case of commercial professional use, the Licensed Software is not a substitute for Licensee’s professional judgment or independent testing. The Licensed Software is intended only to assist Licensee with its design, analysis, simulation, estimation, testing and/or other activities and are not a substitute for Licensee’s own independent design, analysis, simulation, estimation, testing, and/or other activities, including those with respect to product stress, safety and utility. Due to the large variety of potential applications for the Licensed Software, the Licensed Software has not been tested in all situations under which it may be used. Autodesk will not be liable in any manner whatsoever for the results obtained through use of the Licensed Software. Persons using the Licensed Software are responsible for the supervision, management, and control of the Licensed Software and the results of using the Licensed Software. This responsibility includes, without limitation, the determination of appropriate uses for the Licensed Software and the selection of the Licensed Software and other computer programs and materials to help achieve intended results. Persons using the Licensed Software are also responsible for establishing the adequacy of independent procedures for testing the reliability, accuracy, completeness, and other characteristics of any output of the Licensed Software, including, without limitation, all items designed with the assistance of the Licensed Software. Licensee further acknowledges and agrees that the Licensed Software, and any Software Application derived from the Licensed Software, form part of Licensee’s total unique hardware and software environment to deliver specific functionality, and that the Licensed Software provided by Autodesk may not achieve the results Licensee desires within Licensee’s design, analysis, simulation, estimation, and/or testing constraints.
View Source

Related to Functionality Limitations

  • Warranty Limitations The Limited Warranties in clauses 1.2 and 1.3 are subject to and must be read together with the limitations, exclusions, and limitations set out below.

  • Service Limitations The FCC requires that Provider provide E911 Service to all Customers who use Provider Services within the United States. Sections 13.2-13.8 apply to all Customers who use Provider Services within the United States. Section 13.9 applies to all Customers.

  • Usage Limitations You shall use best efforts to ensure that only Authorized Customer Support Users are provided access to the Service Desk Infrastructure and Student Support Services, including not causing or permitting third parties to access such infrastructure or services.

  • Specific Limitations No Member shall have the right or power to: (a) withdraw or reduce such Member’s Capital Contribution except as a result of the dissolution of the Company or as otherwise provided by law or in this Agreement; (b) make voluntary Capital Contributions or to contribute any property to the Company other than cash; (c) bring an action for partition against the Company or any Company assets; (d) cause the termination and dissolution of the Company, except as set forth in this Agreement; or (e) upon the Distribution of its Capital Contribution require that property other than cash be distributed in return for its Capital Contribution. Each Member hereby irrevocably waives any such rights.

  • Review Process Limitations The Asset Representations Reviewer will have no obligation (i) to determine whether a Delinquency Trigger Event has occurred or whether the required percentage of Noteholders has voted to direct an Asset Representations Review under the Indenture, (ii) to determine which Receivables are subject to an Asset Representations Review, (iii) to obtain or confirm the validity of the Review Materials, (iv) to obtain missing or insufficient Review Materials except as specifically described herein, (v) to take any action or cause any other party to take any action under any of the Transaction Documents to enforce any remedies for breaches of representations or warranties about the Eligible Representations, (vi) to determine the reason for the delinquency of any Review Receivable, the creditworthiness of any Obligor, the overall quality of any Review Receivable or the compliance by the Servicer with its covenants with respect to the servicing of such Review Receivable, or (vii) to establish cause, materiality or recourse for any failed Test as described in Section 3.03.