Common use of Glissando scanner Clause in Contracts

Glissando scanner. For Customer purchasing a Glissando Scanner as noted on the Quotation the following additional terms shall apply. In the event of any conflict between the terms of this Section 7. and the previous terms in the exhibit this section 7. shall control for Customers purchasing the Glissando Scanner. The Glissando Scanner is a third-party product, distributed by Philips pursuant to its agreement with Objective Imaging, which is the legal manufacturer (“Manufacturer”) of the Glissando Scanner. The Extended Warranty model for the Glissando Scanner is materially different than that of Philips manufactured equipment, Customer agrees to the following terms for the Glissando scanner Extended Warranty. 7.1. Planned Maintenance Customer will be responsible for cleaning the accessible parts of the Glissando Scanner. Customer will be trained onsite by a Philips-certified engineer during initial installation or by a Philips-certified Applications Specialist during initial product training on maintenance of the Glissando Scanner. Customer will be responsible for cleaning the accessible parts of the Glissando Scanner. 7.2. Minor Repair via Service Kit., Customer will be responsible for minor repair and maintenance of the Glissando Scanner via the Service Kit. Upon initial installation, Philips will make a Service Kit with replaceable spare parts (“Service Kit”) available to Customer. In case Customer used a replaceable part and wishes to replenish consumed parts from the Service Kit, Customer will send the replaced parts back to Philips. Philips will replenish the required part in the Service Kit during applicable warranty period at no cost. 7.3. Major Repair(s) / Corrective Maintenance. In case a Philips certified engineer has established that a Glissando Scanner cannot be remotely repaired or repaired by Customer through the Service Kit, and the Glissando Scanner has to undergo a Major Repair, Customer will package and send the defective Glissando Scanner to Philips or Manufacturer for repair, in accordance with Philips’ instructions. Philips will temporarily provide the Customer a loaner Products. Customer shall install the loaner Products – remotely guided by a Philips-certified engineer if needed. Once the defective Product is repaired, it will be shipped back to Customer. Upon receipt of the repaired Glissando Scanner the Customer shall replace the loaner Glissando Scanner by installing the repaired Glissando Scanner and packing and shipping back the loaner Glissando Scanner as per the instructions of Philips. The remedies set forth in this Section 7. are the sole and exclusive remedies under the Extended Warranty of the Glissando Scanner, subject to the Warranty Provisions under the purchase contract under which Customer purchased the Glissando Scanner. 7.3.1. All returned items must be in their original box or crating and must include all packing material, manuals, and accessories. Please take care to package your return carefully. Philips is not responsible for damage or a lost product(s) caused by shipping. Any damage or subsequent failure of the hardware product related to inappropriate packaging may result in additional charges for the repair of the product. 7.4. No onsite repair or maintenance. Customer acknowledges that by purchasing an extended warranty for the Glissando Scanner, the above process is Customer’s exclusive remedy for a Glissando Scanner which is not performing in compliance with the performance specifications, as set out in the documentation accompanying the product. Philips nor the Manufacture will be providing any onsite repair or maintenance of the Glissando Scanner. In the event Philips does agree to provide any onsite services for the Glissando Scanner it shall be at standard Glissando Scanner Philips’ standard service rates including additional fees for after-hours rates. 7.5. Software Updates mentioned under 7.5.1 and 7.5.2 below are provided free of charge during the extended warranty period. The ones mentioned under 7.5.3 are excluded and need to be ordered and paid for separately. Updates shall be provided in the following forms:

Glissando scanner. For Customer purchasing a Glissando Scanner as noted on the Quotation the following additional terms shall apply. In the event of any conflict between the terms of this Section 7. and the previous terms in the exhibit this section 7. shall control for Customers purchasing the Glissando Scanner. The Glissando Scanner is a third-party product, distributed by Philips pursuant to its agreement with Objective Imaging, which is the legal manufacturer (“Manufacturer”) of the Glissando Scanner. The Extended Warranty model for the Glissando Scanner is materially different than that of Philips manufactured equipment, Customer agrees to the following terms for the Glissando scanner Extended Warranty. 7.1. Planned Maintenance Customer will be responsible for cleaning the accessible parts of the Glissando Scanner. Customer will be trained onsite by a Philips-certified engineer during initial installation or by a Philips-certified Applications Specialist during initial product training on maintenance of the Glissando Scanner. Customer will be responsible for cleaning the accessible parts of the Glissando Scanner. 7.2. Minor Repair via Service Kit., Customer will be responsible for minor repair and maintenance of the Glissando Scanner via the Service Kit. Upon initial installation, Philips will make a Service Kit with replaceable spare parts (“Service Kit”) available to Customer. In case Customer used a replaceable part and wishes to replenish consumed parts from the Service Kit, Customer will send the replaced parts back to Philips. Philips will replenish the required part in the Service Kit during applicable warranty period at no cost. 7.3. Major Repair(s) / Corrective Maintenance. In case a Philips certified engineer has established that a Glissando Scanner cannot be remotely repaired or repaired by Customer through the Service Kit, and the Glissando Scanner has to undergo a Major Repair, Customer will package and send the defective Glissando Scanner to Philips or Manufacturer for repair, in accordance with Philips’ instructions. Philips will temporarily provide the Customer a loaner Products. Customer shall install the loaner Products – remotely guided by a Philips-certified engineer if needed. Once the defective Product is repaired, it will be shipped back to Customer. Upon receipt of the repaired Glissando Scanner the Customer shall replace the loaner Glissando Scanner by installing the repaired Glissando Scanner and packing and shipping back the loaner Glissando Scanner as per the instructions of Philips. The remedies set forth in this Section 7. are the sole and exclusive remedies under the Extended Warranty of the Glissando Scanner, subject to the Warranty Provisions under the purchase contract under which Customer purchased the Glissando Scanner. 7.3.1. All returned items must be in their original box or crating and must include all packing material, manuals, and accessories. Please take care to package your return carefully. Philips is not responsible for damage or a lost product(s) caused by shipping. Any damage or subsequent failure of the hardware product related to inappropriate packaging may result in additional charges for the repair of the product. 7.4. No onsite repair or maintenance. Customer acknowledges that by purchasing an extended warranty for the Glissando Scanner, the above process is Customer’s exclusive remedy for a Glissando Scanner which is not performing in compliance with the performance specifications, as set out in the documentation accompanying the product. Philips nor the Manufacture will be providing any onsite repair or maintenance of the Glissando Scanner. In the event Philips does agree to provide any onsite services for the Glissando Scanner it shall be at standard Glissando Scanner Philips’ standard service rates including additional fees for after-hours rates. 7.5. Software Updates mentioned under 7.5.1 and 7.5.2 below are provided free of charge during the extended warranty period. The ones mentioned under 7.5.3 are excluded and need to be ordered and paid for separately. Updates shall be provided in the following forms:

Glissando scanner. 7.1 For Customer purchasing a Glissando Scanner ▇▇▇▇▇▇▇ as noted on the Quotation the following additional terms shall apply. In the event of any conflict between the terms of this Section 7. and the previous terms in the exhibit this section 7. shall control for Customers purchasing the Glissando Scanner. The Glissando Scanner is a third-party product, distributed by Philips pursuant to its agreement with Objective Imaging, which is the legal manufacturer (“Manufacturer”) of the Glissando Scanner. The Extended Warranty model for the Glissando Scanner is materially different than that of Philips manufactured equipment, Customer agrees to the following terms for the Glissando scanner Extended Warranty. 7.1. 7.1.1 Planned Maintenance Customer will be responsible for cleaning the accessible parts of the Glissando Scanner. Customer will be trained onsite by a Philips-certified engineer during initial installation or by a Philips-certified Applications Specialist during initial product training on maintenance of the Glissando Scanner. Customer will be responsible for cleaning the accessible parts of the Glissando Scanner. 7.2. 7.1.2 Minor Repair via Service Kit., Customer will be responsible for minor repair and maintenance of the Glissando Scanner via the Service Kit. Upon initial installation, Philips will make a Service Kit with replaceable spare parts (“Service Kit”) available to Customer. In case Customer used a replaceable part and wishes to replenish consumed parts from the Service Kit, Customer will send the replaced parts back to Philips. Philips will replenish the required part in the Service Kit during applicable warranty period at no cost. 7.3. 7.1.3 Major Repair(s) / Corrective Maintenance. In case a Philips certified engineer has established that a Glissando Scanner cannot be remotely repaired or repaired by Customer through the Service Kit, and the Glissando Scanner has to undergo a Major Repair, Customer will package and send the defective Glissando Scanner to Philips or Manufacturer for repair, in accordance with Philips’ instructions. Philips will temporarily provide the Customer a loaner Products. Customer shall install the loaner Products – remotely guided by a Philips-certified engineer if needed. Once the defective Product is repaired, it will be shipped back to Customer. Upon receipt of the repaired Glissando Scanner the Customer shall replace the loaner Glissando Scanner by installing the repaired Glissando Scanner and packing and shipping back the loaner Glissando Scanner as per the instructions of Philips. The remedies set forth in this Section 7. are the sole and exclusive remedies under the Extended Warranty of the Glissando Scanner, subject to the Warranty Provisions under the purchase contract under which Customer purchased the Glissando Scanner. 7.3.1. 7.1.3.1 All returned items must be in their original box or crating and must include all packing material, manuals, and accessories. Please take care to package your return carefully. Philips is not responsible for damage or a lost product(s) caused by shipping. Any damage or subsequent failure of the hardware product related to inappropriate packaging may result in additional charges for the repair of the product. 7.4. 7.2 No onsite repair or maintenance. Customer acknowledges that by purchasing an extended warranty for the Glissando Scanner, the above process is Customer’s exclusive remedy for a Glissando Scanner which is not performing in compliance with the performance specifications, as set out in the documentation accompanying the product. Philips nor the Manufacture will be providing any onsite repair or maintenance of the Glissando Scanner. In the event Philips does agree to provide any onsite services for the Glissando Scanner it shall be at standard Glissando Scanner Philips’ standard service rates including additional fees for after-hours rates. 7.5. 7.3 Software Updates mentioned under 7.5.1 and 7.5.2 below are provided free of charge during the extended warranty period. The ones mentioned under 7.5.3 are excluded and need to be ordered and paid for separately. Updates shall be provided in the following forms: