Hardware Repair Clause Samples

POPULAR SAMPLE Copied 1 times
Hardware Repair. Dialogic will repair defective Field Replaceable Units (“FRU”) on Applicable Dialogic Hardware Products (“Hardware Repair”). Unless otherwise agreed by the parties, Dialogic shall complete repairs and return a repaired FRU or ship an equivalent replacement FRU within thirty (30) business days of receipt of a defective FRU at the Dialogic assigned TAC. Once a FRU is identified as faulty, the Customer shall obtain a Return Material Authorization (“RMA”) number from Dialogic and then return the FRU for repair/replacement. RMA requests shall be addressed by Dialogic during Standard Support Hours for the assigned TAC. Customer shall appropriately package the FRU to be returned to ensure that it is not damaged in shipment and is clearly marked. Any FRU damaged in transit will be repaired at the Customer’s expense or, if in the opinion of Dialogic the damage is sufficient to compromise its future reliability, the FRU will be returned to the Customer unrepaired. Customer shall bear the risk of loss or damage until the FRU is received by Dialogic and shall bear the cost of transportation charges for shipment to Dialogic of the FRU to be repaired or replaced. For return shipments from Dialogic to the Customer, Dialogic shall bear the risk of loss or damage during transit and shall prepay and bear the cost of transportation charges for shipment of the FRU that has been repaired or replaced, provided Customer shall be responsible for all applicable international taxes and duties. If the FRU returned to Dialogic is not defective, Dialogic shall promptly advise the Customer in writing of this determination, and in such cases, Dialogic shall return the FRU to the Customer at Customer’s expense and risk in its "as received" condition. If the FRU returned is not covered by the Services hereunder, Dialogic shall promptly advise Customer in writing of this determination; and in such cases, Dialogic shall return the FRU to the Customer at Customer’s expense and risk in its "as received" condition. Any FRU repaired or replaced by Dialogic shall be either be provided with (i) Dialogic’s standard warranty, commencing with the date upon which the repaired or replaced FRU is returned to the Customer, for a period of ninety (90) days or,
View SourceView Similar (3)
Hardware Repair a) Access to Castle's repair service will be provided pursuant to the Basic Fee through the appropriate Castle service location, during its normal business hours. Repair Services will be provided in accordance with the Repair Procedures described in SCHEDULE D attached hereto. b) No Products may be returned without prior authorization from Castle, which authorization shall not be unreasonably delayed or withheld. c) Castle will provide three types of Repair Services during a seven (7) day by twenty-four (24) hour availability:
View SourceView Similar (2)
Hardware Repair. Hardware Repair provides for the testing, priority repair, revision updating and return of in- warranty or out-of-warranty Hardware plug-in modules received by Tellabs during the Support Term. This Service encompasses the following: (a) Priority Repair Turnaround Time. Hardware repair will typically be completed within a Turnaround Time of fifteen (15) Business Days for returns containing forty (40) or fewer Hardware units per RMA. The Turnaround Time for returns exceeding forty (40) Hardware units per RMA will be as mutually agreed.
View Source
Hardware Repair a) Access to Company's repair service will be provided at no charge through the appropriate Company service location, during its normal business hours (8:00 am EST to 5:00 pm EST). Services will be provided in accordance with the Repair Procedures described in SCHEDULE D attached hereto. No Products may be returned without prior authorization from Company, which authorization shall not be unreasonably delayed or withheld as outlined in SCHEDULE H. b) Siemens will provide a trouble report with the returned product. The trouble report is attached as SCHEDULE G. c) Company will provide three types of Repair Services during a five (5) day by twenty-four (24) hour availability: I. ADVANCED REPLACEMENT - DEAD-ON-ARRIVAL
View Source
Hardware Repair. Repair Vendor will perform the Services in the Territory in accordance with the terms and conditions of this Agreement. Services will conform to the scope of work described in the SOW and corresponding Purchase Orders issued by Sun. Repair Vendor will perform Services as an independent contractor and in a professional and workmanlike manner, consistent with Sun and industry standards and conforming to applicable product specifications as defined in the SOW.
View Source
Hardware Repair. IWL will swap out hardware components that have failed by shipping a new component to the Customer. Customer may be required to ship failed components back to IWL.
View Source

Related to Hardware Repair

  • MAINTENANCE & REPAIR Tenant agrees that if there is any delay in maintenance or repairs for reasons beyond Landlord's control, this shall have no effect on Tenant's obligations under this lease.

  • Maintenance & Repairs 5.1 Lessee shall at all times be responsible for maintaining at its own expense the leased premises in a clean, orderly and safety condition, except as hereinafter provided. Lessee shall be responsible, at its own expense, to clean and maintain all trade fixtures, machinery and equipment furnished by Lessee within the leased premises. Lessee shall be responsible to deposit normal office waste and rubbish at a location at the Central School as designated by Lessor. 5.2 Lessee shall be responsible to perform all repairs the need for which is caused by ▇▇▇▇▇▇'s use of the premises except that Lessor shall be responsible to perform major repairs of a structural nature. Lessor shall be responsible to arrange for removal of waste and rubbish from the location designated as the deposit location for lessees. All costs incurred by Lessor pursuant to the obligations of this Paragraph shall be included within "operating costs". 5.3 Lessor shall provide custodian services for the common areas of Central School. Costs incurred by Lessor in providing such custodian services shall be included within "operating costs".

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Repair Concessionaire shall, prior to the commencement of the Concession Operation under this Agreement, provide to Department a type-written concession equipment maintenance plan for the State-owned equipment located on the Concession Premises, together with a schedule for preventative maintenance and a report on maintenance completion and equipment condition. Failure to comply with this preventative maintenance schedule shall result in Concessionaire being responsible for all repairs and/or replacement of equipment. The review and Department inspection of the Concession Premises and its equipment will be conducted during routine inspection of the Concession Premises and as a part of the Mandatory Compliance and Performance Evaluation Meetings.

  • Installation When installation is required, the Contractor shall be responsible for placing and installing the Commodities or parts in the required locations at no additional charge. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the Commodity or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, tools, rigging, labor, and materials required to install or replace the Commodities or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.