Headform. 1.1. The headform shall consist of a solid wooden hemisphere with an added smaller spherical segment as shown in figure A below. It shall be constructed so that it can be dropped freely along the axis marked and it shall have provision for mounting an accelerometer in order to measure the acceleration along the direction of fall. 1.2. The headform shall have a total mass, including the accelerometer of 2.75 ± 0.05 kg.
Appears in 11 contracts
Sources: Regulation Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Regulation No. 129, Regulation No. 129
Headform. 1.1. The headform shall consist of a solid wooden hemisphere with an added smaller spherical segment as shown in figure Figure A below. It shall be constructed so that it can be dropped freely along the axis marked and it shall have provision for mounting an accelerometer in order to measure the acceleration along the direction of fall.
1.2. The headform shall have a total mass, including the accelerometer of 2.75 ± 0.05 kg.
Appears in 3 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Headform. 1.1. The headform shall consist of a solid wooden hemisphere with an added smaller spherical segment as shown in figure Figure A below. It shall be constructed so that it can be dropped freely along the axis marked and it shall have provision for mounting an accelerometer in order to measure the acceleration along the direction of fall.
1.2. The headform shall have a total mass, including the accelerometer of 2.75 ± 0.05 kg.. Figure A Dimensions in mm
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Headform. 1.1. The headform shall consist of a solid wooden hemisphere with an added smaller spherical segment as shown in figure A below. It shall be constructed so that it can be dropped freely along the axis marked and it shall have provision for mounting an accelerometer in order to measure the acceleration along the direction of fall.
1.2. The headform shall have a total mass, including the accelerometer of 2.75 ± 0.05 kg.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Headform. 1.1. The headform shall consist of a solid wooden hemisphere with an added smaller spherical segment as shown in figure Figure A below. It shall be constructed so that it can be dropped freely along the axis marked and it shall have provision for mounting an accelerometer in order to measure the acceleration along the direction of fall.
1.2. The headform shall have a total mass, including the accelerometer of 2.75 ± 0.05 kg.0.05
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Headform. 1.1. The headform shall consist of a solid wooden hemisphere with an added smaller spherical segment as shown in figure Figure A below. It shall be constructed so that it can be dropped freely along the axis marked and it shall have provision for mounting an accelerometer in order to measure the acceleration along the direction of fall.
1.2. The headform shall have a total mass, including the accelerometer of 2.75 ± 0.05 kg.. Figure A
Appears in 1 contract
Headform. 1.1. The headform shall consist of a solid wooden hemisphere with an added smaller spherical segment as shown in figure Figure A below. It shall be constructed so that it can be dropped freely along the axis marked and it shall have provision for mounting an accelerometer in order to measure the acceleration along the direction of fall.
1.2. The headform shall have a total mass, including the accelerometer of 2.75 ± 0.05 kg.. direction of fall Dimensions in mm
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles