Common use of INTENT OF PLANS AND SPECIFICATIONS Clause in Contracts

INTENT OF PLANS AND SPECIFICATIONS. 1.1.1 These outline lease specifications and construction layouts contain the same minimum requirements of the Lessee and are for a complete structure, including heating, ventilating and air conditioning, electrical wiring, plumbing, fire protection work, hardwares, and interior finishes. 1.1.2 The building is to be constructed in compliance with all local, city, state or federal government building codes and Health Department requirements. In addition, all covenants, codes, and restrictions (CCR) must be complied with relative to construction and building locations. In all instances where no apparent codes prevail, same shall be constructed in compliance with Title 24, ACI, AICS, ASHRAE, ASTM, AWSC, BOCA, NEC, NFPA, UPC and OSHA. 1.1.3 Dimensions and locations of property lines on any drawings furnished by Lessee are approximate only, and it is the Lessor's responsibility to ascertain the actual dimensions and locations. 1.1.4 No substitutions, changes, or deviations from the specifications or drawings shall be made without the written approval of the Lessee. 1.1.5 If there is any conflict or disagreement between the specifications or drawings, the Lessee is to be consulted as to which will prevail. Should anything be mentioned in these specifications and not shown in the drawings, or vice versa, the same shall be followed as if set forth in both, as it is the intent of these specifications and accompanying drawings to correspond and embody every item and part necessary for the completion of the building, ready for a supermarket operation. 1.1.6 Lessor shall deliver to Lessee "as-built" drawings showing all addenda revisions, changes necessitated by field conditions and other deviations. "As-built" drawings shall be one set sepia reproducibles. 1.1.7 Lessee reserves the right to review building plans and such review must be secured before construction of the building is started.