Materials and Installation Sample Clauses
The 'Materials and Installation' clause defines the standards and requirements for the materials to be used and the methods of installation in a project. It typically specifies the quality, type, and source of materials, as well as the procedures and workmanship standards that must be followed during installation. For example, it may require that all materials meet certain industry certifications and that installation is performed by qualified personnel according to manufacturer guidelines. This clause ensures that the finished work meets agreed-upon quality and safety standards, reducing the risk of defects and disputes over construction quality.
POPULAR SAMPLE Copied 2 times
Materials and Installation. Any and all materials, equipment, supplies and furnishings incorporated in the Work or provided by TSP hereunder shall be new, shall comply with the requirements of the Contract Documents, including the Technical Requirements, and shall be of good quality, free of defects and suitable for their intended purpose, and TSP shall perform the TCS Installation Work in a workmanlike manner, without defects in construction or workmanship and shall comply with all requirements of the Contract Documents with respect thereto.
Materials and Installation. A. Carpet
1. Carpeting in office areas shall be building standard wall-to-wall glue down installation, color selected by Tenant from Landlord's sample board.
Materials and Installation. The Autoclave will be supplied and erected at the Site by others. The Contractor shall install the brick lining comprising ceramic paper, and acid resistant bricks, compartment divider walls and the titanium nozzle liners. The Contractor’s scope of supply shall include, but is not limited to the following: • install the brick lining as detailed on the manufacturer/supplier’s design drawings which will consist of a ceramic paper layer (if detailed as the Supplier as part of the lining system), backing mortar joint, backing course of brick, face course mortar joint, and face course of brick. • install the brick lining to the nozzles which nominally consists of a ceramic paper layer (if deemed required by the Supplier), mortars as detailed, polymer blocks or sleeve as detailed, and the titanium sleeve. • installation of titanium compartment divider walls and titanium nozzle liners as detailed on the drawings • all materials (not detailed in clause 8.3 as being supplied by others), equipment, manpower, supervision, transportation as required to complete the installation of the brick lining • post installation treatment and/or curing in accordance with the manufacturer/supplier’s recommendations and procedures • inspection, examinations, and testing
Materials and Installation. Covers defects in materials and workmanship directly related to the system's installation. ● Minor settling of soil around catch basins and trenches that have sod or erosion control ●
Materials and Installation. Adjustment Rings External Chimney Seal
Materials and Installation. A. Ceiling suspension materials
1. Ceilings throughout shall be manufacturer's standard exposed runners, cross-runners and accessories mechanically suspended on a 2' x 4' metal grid to receive acoustical ceiling boards.
2. Ceiling members shall have uniform factory-applied finish on exposed surfaces of ceiling suspension system, including molding, trim and accessories. Finish shall be manufacturer's standard white baked enamel.
B. Acoustical panels
1. Acoustical ceiling boards shall be 2' x 4' x 5/8" Celotex mosaic pattern or equal lay-in fissured mineral acoustical boards with an NRC of 50-65.
Materials and Installation. The individual channel letters/components shall be constructed as follows:
A. All letters/components shall be flush mounted on the wall area designated for the Tenant signage.
B. All signs shall be designed, constructed and installed in accordance to meet local signage and electrical codes.
Materials and Installation