Ordering and acceptance procedures Sample Clauses

The "Ordering and acceptance procedures" clause defines the process by which orders are placed and subsequently accepted under an agreement. Typically, it outlines the steps a buyer must follow to submit an order, such as using a purchase order form or an online system, and specifies how and when the seller confirms acceptance, which may include written confirmation or shipment of goods. This clause ensures both parties have a clear understanding of when a binding contract is formed for each order, reducing the risk of disputes over whether and when obligations arise.
Ordering and acceptance procedures. (a) You may request Services at any time from Superloop by submitting a Service Order to Superloop. By submitting a Service Order, You agree to be bound by this Agreement. (b) Superloop may accept or reject a Service Order at its discretion. (c) A Service Order will be effective on and from the date it is accepted by Superloop.
View SourceView Similar (4)
Ordering and acceptance procedures. 2.1 From time to time, the Requesting Operator may place an Order. 2.2 The Providing Operator may reject an Order only: (a) in accordance with clause 4.1, Part B of Schedule 2; or (b) if the Blockwiring required to fulfill the Order is not available on the date of receipt of the Order. 2.3 For the purpose of clause 2.2(b) of this Agreement and clause 3.1 of Schedule 2 and subject to clause 2.6, 2.7 and 2.8 of this Agreement, Blockwiring shall be regarded as being available if all the conditions set out in following paragraphs are satisfied: (a) there is suitable Vertical Blockwiring in place in the Blockwiring Building proposed in the Order which complies with the relevant specifications set out in Schedule 2; (b) in the case of an Order for Vertical Blockwiring combined with Horizontal Blockwiring, there is Horizontal Blockwiring and a Termination Socket in place or the Requesting Operator provides its own horizontal blockwiring or the Parties agree the terms and conditions on which the Providing Operator shall install that horizontal blockwiring; and (c) the Blockwiring is not on the date of receipt of the Order: (i) subject to clauses 2.4 and 2.5 below, being used by any person (including the Providing Operator); or (ii) reasonably required to be used by the Providing Operator during the period of months after the proposed Available Date on the basis of the Providing Operator’s current business plan at the date of receipt of the applicable Order; or (iii) the subject of an order received by the Providing Operator from a third party (including another telecommunication service provider) on or before the date of receipt of the Order by the Providing Operator; or (iv) the subject of a bona fide order placed with the Providing Operator on or before the date of receipt of the Order by a person (other than a telecommunication service provider) who wishes to use the Blockwiring or a service provided by the Providing Operator using the Blockwiring (other than Blockwiring referred to in clause 2.4 below); or (v) subject to any of the circumstances described in clause 3.4 of this Agreement which, if the Blockwiring were provisioned, the Providing Operator would be entitled to terminate the Contract under that clause. 2.4 If the Providing Operator is providing telecommunication service to a Subscriber over any Blockwiring and that Subscriber wishes to terminate all services provided over that Blockwiring and become a Subscriber of the Requesting Operator and that ...
View SourceView Similar (3)
Ordering and acceptance procedures. (a) You may request one or more Services at any time from Our ISP by submitting one or more Service Orders to Our ISP. By submitting a Service Order, You warrant that You are acquiring the Services entirely for business purposes and are authorised to be bound by, or bind the customer to, the terms of this Agreement. (b) Our ISP may accept or reject a Service Order at its discretion. (c) Each Service Order will be effective from the Service Order Commencement Date of the applicable Service Order.
View Source
Ordering and acceptance procedures 
View SourceView Similar (2)

Related to Ordering and acceptance procedures

  • Testing and Acceptance Within […***…] after RFM’s delivery of the IC Design File to ST, ST shall manufacture and deliver a commercially reasonable quantity of evaluation Product to RFM for evaluation testing. Upon RFM’s receipt of such Products from ST, RFM shall test such Products with the applicable Evaluation Software and in the applicable Evaluation Circuit Design to determine if the IC Design for such Products conforms to the applicable Specifications. Upon completion of such testing, RFM shall provide ST with the data from such testing (“Evaluation Data”). Upon ST’s receipt of the Evaluation Data, ST shall evaluate whether the Evaluation Data indicates that the IC Design conforms to the Specifications in all material respects. ST shall accept or reject the IC Design based on the Evaluation Data and shall give RFM written notice thereof within seven (7) calendar days after RFM’s delivery of the Evaluation Data to ST. An IC Design will be deemed accepted by ST if RFM has not received notification of rejection of such IC Design from ST within seven (7) calendar days after RFM’s delivery of the applicable Evaluation Data to ST. ST’s refusal to accept the IC Design must be reasonable, must be in writing and must be accompanied by a reasonably detailed description of the manner in which the IC Design fails to comply with the Specifications in all material respects (collectively, the “Deficiencies”) so that RFM can have the opportunity to correct the Deficiencies. If ST properly rejects the IC Design, RFM shall use commercially reasonable efforts to correct any Deficiencies and redeliver a corrected IC Design File within […***…] after RFM’s receipt of the rejection notice and the foregoing provisions set forth in this Section 3.3 shall be reapplied until the IC Design is accepted; provided, however, that upon the […***…] or any subsequent rejection, either party may terminate this Agreement upon thirty (30) calendar days prior written notice to the other party, unless the IC Design is accepted during such notice period.

  • Acceptance Procedures Based on the Reply Prices and Reply Amounts received by the Auction Agent prior to the applicable Auction Response Date, the Auction Agent, in consultation with the Auction Party, will determine the applicable price (the “Applicable Price”) for the Auction, which will be the lowest Reply Price for which the Auction Party can complete the Auction at the Auction Amount; provided that, in the event that the Reply Amounts are insufficient to allow the Auction Party to complete a purchase of the entire Auction Amount (any such Auction, a “Failed Auction”), the Auction Party shall either, at its election, (i) withdraw the Auction or (ii) complete the Auction at an Applicable Price equal to the highest Reply Price. The Auction Party shall purchase the relevant Term Loans (or the respective portions thereof) from each Lender with a Reply Price that is equal to or lower than the Applicable Price (“Qualifying Bids”) at the Applicable Price; provided that if the aggregate proceeds required to purchase all Term Loans subject to Qualifying Bids would exceed the Auction Amount for such Auction, the Auction Party shall purchase such Term Loans at the Applicable Price ratably based on the principal amounts of such Qualifying Bids (subject to rounding requirements specified by the Auction Agent in its discretion). If a Lender has submitted a Return Bid containing multiple bids at different Reply Prices, only the bid with the lowest Reply Price that is equal to or less than the Applicable Price will be deemed to be the Qualifying Bid of such Lender (e.g., a Reply Price of $100 with a discount to par of 1%, when compared to an Applicable Price of $100 with a 2% discount to par, will not be deemed to be a Qualifying Bid, while, however, a Reply Price of $100 with a discount to par of 2.50% would be deemed to be a Qualifying Bid). The Auction Agent shall promptly, and in any case within five Business Days following the Auction Response Date with respect to an Auction, notify (I) the Borrower of the respective Lenders’ responses to such solicitation, the effective date of the purchase of Term Loans pursuant to such Auction, the Applicable Price, and the aggregate principal amount of the Term Loans and the tranches thereof to be purchased pursuant to such Auction, (II) each participating Lender of the effective date of the purchase of Term Loans pursuant to such Auction, the Applicable Price, and the aggregate principal amount and the tranches of Term Loans to be purchased at the Applicable Price on such date, (III) each participating Lender of the aggregate principal amount and the tranches of the Term Loans of such Lender to be purchased at the Applicable Price on such date and (IV) if applicable, each participating Lender of any rounding and/or proration pursuant to the second preceding sentence. Each determination by the Auction Agent of the amounts stated in the foregoing notices to the Borrower and Lenders shall be conclusive and binding for all purposes absent manifest error.

  • Inspection and Acceptance Where the Master Agreement, a Participating Addendum, or an Order does not otherwise specify a process for inspection and Acceptance, this section governs. This section is not intended to limit rights and remedies under the applicable commercial code. Contractor shall provide right of access to the Lead State, or to any other authorized agent or official of the Lead State or other Participating or Purchasing Entity, at reasonable times, in order to monitor and evaluate performance, compliance, and quality assurance requirements under this Master Agreement. Upon delivery, the Purchasing Entity shall have 30 days to inspect. Products that do not meet specifications may be rejected. Failure to reject upon receipt, however, does not relieve the contractor of liability for material (nonconformity that substantially impairs value) latent or hidden defects subsequently revealed when goods are put to use. Acceptance of such goods may be revoked in accordance with the provisions of the applicable commercial code, and the Contractor is liable for any resulting expense incurred by the Purchasing Entity related to the preparation and shipping of Product rejected and returned, or for which Acceptance is revoked. If any services do not conform to contract requirements, the Purchasing Entity may require the Contractor to perform the services again in conformity with contract requirements, at no increase in Order amount. When defects cannot be corrected by re-performance, the Purchasing Entity may require the Contractor to take necessary action to ensure that future performance conforms to contract requirements; and reduce the contract price to reflect the reduced value of services performed. The warranty period shall begin upon Acceptance. The Purchasing Entity will make every effort to notify the Contractor, within thirty (30) calendar days following delivery, of non-acceptance of a Product or completion of Service. In the event that the Contractor has not been notified within 30 calendar days from delivery of Product or completion of Service, the Product and Services will be deemed accepted on the 31st day after delivery of Product or completion of Services. This clause shall not be applicable, if acceptance testing and corresponding terms have been mutually agreed to by both parties in writing. Acceptance Testing may be explicitly set out in a Master Agreement to ensure conformance to an explicit standard of performance. Acceptance Testing means the process set forth in the Master Agreement for ascertaining that the Product meets the standard of performance prior to Acceptance by the Purchasing Entity. If Acceptance Testing is prescribed, this subsection applies to applicable Products purchased under this Master Agreement, including any additional, replacement, or substitute Product(s) and any Product(s) which are modified by or with the written approval of Contractor after Acceptance by the Purchasing Entity. The Acceptance Testing period shall be thirty (30) calendar days or other time period identified in this Master Agreement or the Participating Addendum, starting from the day after the Product is delivered or, if installed, the day after the Product is installed and Contractor certifies that the Product is ready for Acceptance Testing. If the Product does not meet the standard of performance during the initial period of Acceptance Testing, Purchasing Entity may, at its discretion, continue Acceptance Testing on a day-to-day basis until the standard of performance is met. Upon rejection, the Contractor will have fifteen (15) calendar days to cure the standard of performance issue(s). If after the cure period, the Product still has not met the standard of performance, the Purchasing Entity may, at its option: (a) declare Contractor to be in breach and terminate the Order; (b) demand replacement Product from Contractor at no additional cost to Purchasing Entity; or, (c) continue the cure period for an additional time period agreed upon by the Purchasing Entity and the Contractor. Contractor shall pay all costs related to the preparation and shipping of Product returned pursuant to the section. No Product shall be deemed Accepted and no charges shall be paid until the standard of performance is met. The warranty period shall begin upon Acceptance.

  • Delivery and Acceptance of the Manuscript The Author shall deliver the Contribution to the Editor (or, if requested by the Publisher, to the Publisher) on or before Delivery Date (the “Delivery Date”) electronically in the Publisher's standard requested format or in such other form as may be agreed in writing with the Publisher. The Author shall retain a duplicate copy of the Contribution. The Contribution shall be in a form acceptable to the Publisher (acting reasonably) and in line with the instructions contained in the Publisher’s guidelines as provided to the Author by the Publisher. The Author shall provide at the same time, or earlier if the Publisher reasonably requests, any editorial, publicity or other information (and in such form or format) reasonably required by the Publisher. The Publisher may exercise such additional quality control of the manuscript as it may decide at its sole discretion including through the use of plagiarism checking systems and/or peer review by internal or external reviewers of its choice. If the Publisher decides at its sole discretion that the final manuscript does not conform in quality, content, structure, level or form to the stated requirements of the Publisher, the Publisher shall be entitled to terminate this Agreement in accordance with the provisions of this Clause. The Author must inform the Publisher at the latest on the Delivery Date if the sequence of the naming of any co-authors entering into this Agreement shall be changed. If there are any changes in the authorship (e.g. a co-author joining or leaving), then the Publisher must be notified by the Author in writing immediately and the Parties will amend this Agreement accordingly. The Publisher shall have no obligation to consider publication under this Agreement in the absence of such agreed amendment. If the Author fails to deliver the Contribution in accordance with the provisions of this Clause above by the Delivery Date (or within any extension period given by the Publisher at its sole discretion) or if the Author (or any co-author) dies or becomes incapacitated or otherwise incapable of performing the Author’s obligations under this Agreement, the Publisher shall be entitled to either: (a) elect to continue to perform this Agreement in accordance with its terms and the Publisher may commission an appropriate and competent person (who, in the case of co-authors having entered into this Agreement, may be a co-author) to complete the Contribution; or (b) terminate this Agreement with immediate effect by written notice to the Author or the Author's successors, in which case all rights granted by the Author to the Publisher under this Agreement shall revert to the Author/Author's successors (subject to the provisions of the Clause "Termination"). The Author agrees, at the request of the Publisher, to execute all documents and do all things reasonably required by the Publisher in order to confer to the Publisher all rights intended to be granted under this Agreement. The Author warrants that the Contribution is original except for any excerpts from other works including pre-published illustrations, tables, animations, text quotations, photographs, diagrams, graphs or maps, and whether reproduced from print or electronic or other sources ("Third Party Material") and that any such Third Party Material is in the public domain (or otherwise unprotected by copyright/other rights) or has been included with written permission from or on behalf of the rights holder (and if requested in a form prescribed or approved by the Publisher) at the Author's expense unless otherwise agreed in writing, or is otherwise used in accordance with applicable law. On request from the Publisher, the Author shall in writing indicate the precise sources of these excerpts and their location in the manuscript. The Author shall also retain the written permissions and make them available to the Publisher on request.

  • Inspection and Acceptance of Commodities The services provided by Contractor are not anticipated to include the provision of commodities. In the event commodities are offered under this contract, these provisions shall apply.