Technical descriptions Sample Clauses

A Technical Descriptions clause defines the standards, specifications, or detailed requirements that products, services, or deliverables must meet under the agreement. It typically outlines the precise technical parameters, such as dimensions, materials, performance criteria, or compliance with industry standards, that the parties have agreed upon. By clearly documenting these technical expectations, the clause helps prevent misunderstandings and disputes over quality or suitability, ensuring both parties have a shared understanding of what is to be provided.
Technical descriptions. A Balancing Service Provider shall deliver, upon Fingrid’s request, descriptions of the technical properties of the Reserve Units and of the implementation of load-frequency control to an extent that enables this data to be used for modelling the operation of the load-frequency control of the Reserve Units. In so far as the delivery of the data would entail excessive costs for the Balancing Service Provider, the parties shall ne- gotiate on what type of data is considered sufficient for delivery.
Technical descriptions. 10.1. Whilst the Company takes every precaution in the preparation of its technical descriptions contained in quotations, offers, brochures, specifications and its other literature in writing, these documents are for the Purchaser’s general guidance only and the particulars contained therein shall not constitute representations by the Company and the Company shall not be bound thereby.
Technical descriptions. The Balancing Service Provider shall submit, upon ▇▇▇▇▇▇▇’s request, descriptions of the technical properties of the Reserve Units and the implementation of the activation of the reserve. In so far as the delivery of the data would entail excessive costs for the Balancing Service Provider, the parties shall negotiate on what type of data is considered sufficient for delivery.
Technical descriptions. The Ifremer wind generator is an open jet blower type with twelve axial fans of 1 m diameter, arranged in three rows of four fans. It has a constant rectangular cross section with an outlet of 4.3 m x 3.2 m (width x height). The flow generated by the axial fans passes through a main flow straightener, a mesh screen and finally a honeycomb-like section with rectangular cells, in order to minimize the swirl and lateral/vertical mean velocities. The wind generator is hung from a gantry crane to not interfere with the generated waves passing underneath. Figure 5.1 shows the wind generator installed over the wave basin. Figure 5.1: Wind generator at Ifremer wave basin Figure 5.2 Scheme of the outlet of ECN wind generator, with in blue the convergent, in red the honeycomb and in orange the porous screen.
Technical descriptions. The technical descriptions contained in Exhibit A hereto are intended to include the basic design principles, concepts, and requirements for the Facility but do not include the final, detailed design, plans, or specifications or indicate or describe each and every item required for full performance of the physical Facility and for successfully testing such Work. The Contractor agrees to prepare and modify, as required, all necessary and required, complete and detailed designs, plans, drawings, and specifications.
Technical descriptions 

Related to Technical descriptions

  • Task Description This task includes activities associated with permit-required monitoring conducted in accordance with the conditions specified by state or federal regulatory agencies. All monitoring tasks must be located within or adjacent to the Project area and follow the Department’s Regional Coastal Monitoring Program and FWC's marine turtle and shorebird monitoring programs. Guidance for monitoring of nearshore resources is available in the Department's Standard Operation Procedures For Nearshore Hardbottom Monitoring Of Beach Nourishment Projects. The Local Sponsor must submit work products directly to the appropriate state or federal regulatory agencies in accordance with permit conditions to be eligible for reimbursement under this task, unless otherwise directed.

  • Site Description {Buyer Comment: Provide a legal description of the Site, including the Site map.}

  • System Description The wet detention basin is designed to trap 80% of sediment in runoff and maintain pre-development downstream peak flows. The basin has two forebays (smaller ponds) located at the low end of two grass ▇▇▇▇▇▇. In addition to runoff conveyance, the grass ▇▇▇▇▇▇ also allow infiltration and filtering of pollutants, especially from smaller storms. The forebays are each 4 feet deep. They are connected to the main pool by 18 and 24-inch metal pipes that outlet onto a rock chute. The forebays will trap coarse sediments in runoff, such as road sands, thus reducing maintenance of the main basin. The main pool will trap the finer suspended sediment. To do this, the pond size, water level and outlet structures must be maintained as specified in this Agreement (see Figures 1, 2 and 3). The main basin receives runoff from a 67.1 acre drainage area (41.2 acres within the subdivision and 25.9 acres off- site drainage coming from the east). During high rainfall or snow melt events, the water level will temporarily rise and slowly drain down to the elevation of the control structure. The water level is controlled by a 12-inch concrete pipe extending through the berm in the northwest corner of the basin (see Figures 1 and 3). On the face of the 12- inch pipe, there is metal plate with a 3-inch drilled hole (orifice) with stone in front of it. This orifice controls the water level and causes the pond to temporarily rise during runoff events. Washed stone (1-2” diameter) is placed in front of the orifice to prevent clogging. High flows may enter the grated concrete riser or flow over the rock lined emergency spillway. “As-built” construction drawings of the basin, showing actual dimensions, elevations, outlet structures, etc. will be recorded as an addendum(s) to this agreement within 60 days after Waukesha County accepts verification of construction from the project engineer.

  • General Description Employer shall provide Employee with the compensation, incentives, benefits, and business expense reimbursement specified elsewhere in this agreement.