Technical Requirements For All Dedicated Transport Clause Samples

Technical Requirements For All Dedicated Transport. This Section sets forth technical requirements for all Dedicated Transport. 5.3.7.1 When requested by CLEC and subject to all applicable terms, conditions, and applicable charges, and only where such interoffice facilities exist at the time of CLEC request. Physical diversity shall be provided for 251(c)(3) UNE Dedicated Transport. Physical Diversity means that two circuits are provisioned in such a way that no single failure of facilities or equipment will cause a failure on both circuits. 5.3.7.2 AT&T shall provide the physical separation between intra-office and inter-office transmission paths when technically and economically feasible. Physical diversity requested by CLEC shall be subject to additional charges per a BFR process. When additional costs are incurred by AT&T for CLEC specific diversity. AT&T will advise CLEC of the applicable additional charges. AT&T will not process the request for diversity
Technical Requirements For All Dedicated Transport. This Section sets forth technical requirements for all Dedicated Transport. 10.9.1 When requested by CLEC and where such interoffice facilities exist at the time of CLEC’s request and when technically feasible, Dedicated Transport will provide physical diversity. Physical diversity means that two circuits are provisioned in such a way that no single failure of facilities or equipment will cause a failure on both circuits. If changes in the network remove the physical diversity in the future, SBC MISSOURI will not guarantee that diversity will be made available.
Technical Requirements For All Dedicated Transport. This Section sets forth technical requirements for all Dedicated Transport. 5.3.7.1 When requested by CLEC and subject to all applicable terms, conditions, and applicable charges, and only where such interoffice facilities exist at the time of CLEC request. Physical diversity shall be provided for 251(c)(3) UNE Dedicated Transport. Physical Diversity means that two circuits are provisioned in such a way that no single failure of facilities or equipment will cause a failure on both circuits. 5.3.7.2 AT&T shall provide the physical separation between intra-office and inter-office transmission paths when technically and economically feasible. Physical diversity requested by CLEC shall be subject to additional charges per a BFR process. When additional costs are incurred by AT&T for CLEC specific diversity. AT&T will advise CLEC of the applicable additional charges. AT&T will not process the request for diversity until CLEC accepts such charges. Any applicable performance measures will be abated from the time diversity is requested until ▇▇▇▇ accepts the additional charges. 5.3.7.3 Where physical diversity does not exist for dedicated transport, AT&T may be requested to provide such diversity through the BFR process.
Technical Requirements For All Dedicated Transport. This Section sets forth technical requirements for all Dedicated Transport.
Technical Requirements For All Dedicated Transport. This Section sets forth technical requirements for all Dedicated Transport. 7.9.1 When requested by Socket and where such interoffice facilities exist at the time of Socket’s request and when technically feasible, Dedicated Transport will provide physical diversity. Physical diversity means that two circuits are provisioned in such a way that no single failure of facilities or equipment will cause a failure on both circuits. If changes in the network remove the physical diversity in the future, CenturyTel will not guarantee that diversity will be made available. 7.9.2 Socket’s additional cost, if any, for requested dedicated transport diversity shall be as determined in a cost proceeding via a BFR. Where physical diversity does not exist for dedicated transport, CenturyTel shall provide such diversity through the BFR process.

Related to Technical Requirements For All Dedicated Transport

  • Technical Requirements 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone and BellSouth; 4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database; 4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers. 4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone. 4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner. 4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephone’s local switch. 4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.

  • Dedicated Transport A DS0-, DS1-, or DS3-capacity transmission facility between Verizon switches (as identified in the LERG) or UNE Wire Centers, within a LATA, that is dedicated to a particular end user or carrier. Dedicated Transport is sometimes referred to as dedicated interoffice facilities ("IOF"). Dedicated Transport does not include any facility that does not connect a pair of Verizon UNE Wire Centers.

  • Minimum Customer Support Requirements for TIPS Sales Vendor shall provide timely and commercially reasonable support for TIPS Sales or as agreed to in the applicable Supplemental Agreement.

  • Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.