Test under load Sample Clauses

The "Test under load" clause establishes the requirement for a product, system, or service to be tested under conditions that simulate expected or maximum operational demands. In practice, this means subjecting the subject of the contract to high levels of usage, stress, or data throughput to ensure it performs reliably and meets specified standards. This clause is essential for verifying that the deliverable can handle real-world scenarios without failure, thereby reducing the risk of performance issues after deployment.
Test under load. 9.2.1. Indices of difficulty and test method The requirements of Annex 3, paragraph 11.2.4. shall apply. 9.2.2. Interpretation of results A set of four samples, not being the ones mentioned in paragraph 9.1. above, for each chemical shall be tested. Three samples out of four shall give satisfactory results for each chemical."
View SourceView Similar (7)
Test under load. 9.2.1. Indices of difficulty and test method The requirements of Annex 3, paragraph 11.2.4., shall apply. 9.2.2. Interpretation of results
View SourceView Similar (5)
Test under load. 9.2.1. Indices of difficulty and test method The requirements of Annex 3, paragraph 11.2.4. shall apply. 9.2.2. Interpretation of results A set of four samples, not being the ones mentioned in paragraph 6.6.1. above, for each chemical shall be tested. Three samples out of four shall give satisfactory results for each chemical. 1. Definition of type Laminated rigid plastic windscreens shall be deemed to belong to different types if they differ in at least one of the following principal or secondary characteristics. 1.1. The principal characteristics are as follows: 1.1.1. Trade names or marks. 1.1.2. The chemical designation of the single sheet material. 1.1.3. The classification of the material by the manufacturer. 1.1.4. The process of manufacture. 1.1.5. The shape and dimensions. Laminated rigid plastic windscreens shall be deemed to belong to one group for the purposes of tests of mechanical properties and of resistance to the environment. 1.1.6. The nominal thickness 'e' of the pane, a manufacturing tolerance of ± n • x mm being allowed ('n' being the number of layers of rigid plastic in the windscreen and x is the manufacturing tolerance of the single rigid plastic sheets in the windscreen, its value is depending on the process of manufacture and being given in Annex 14, paragraph 1.1.6.). 1.1.7. The nominal thickness of the interlayer or interlayers, 1.1.8. The nature and type of the interlayer or interlayers, e.g. PVB or other plastics-material interlayer or interlayers, 1.1.9. Any special treatment which one of the layers of plastic may have undergone. 1.1.10. The colouring of the plastic product. 1.1.11. The nature of the surface coating. 1.2. The secondary characteristics are as follows: 1.2.1. The colouring (total or partial) of the interlayer or interlayers (colourless or tinted). 1.2.2. The incorporation or otherwise of opaque obscuration. 1.2.3. The presence or absence of conductors or heating elements.
View SourceView Similar (2)

Related to Test under load

  • Unbundled Voice Loops (UVLs) 2.2.1 BellSouth shall make available the following UVLs:

  • Interconnection Customer Obligations The Interconnection Customer shall maintain the Large Generating Facility and the Interconnection Customer’s Interconnection Facilities in a safe and reliable manner and in accordance with this LGIA.

  • Customer Obligations 5.1 Except to the extent that Sonardyne has agreed to provide specified consultancy Services regarding Product selection, the Customer shall be responsible for its own Product selection and for ensuring the suitability of the Products for the required purpose. 5.2 The Customer is responsible for obtaining all necessary consents, licences and permits relating to its use of the Products and/or Services. 5.3 The Customer shall accept delivery and shipment of the Products in accordance with the provisions of clause 6 below. 5.4 The Customer shall indemnify, defend, hold harmless and release Sonardyne at all times against all claims, demands, costs (including legal costs on a full indemnity basis), expenses, losses and liabilities incurred by Sonardyne as a result of: Sonardyne following any designs, specifications, instructions or other reliance on Customer Material; any claim that the Customer Materials, or any part of them infringe any rights of any third parties, including any Intellectual Property Rights; the Customer having failed to install, commission or use the Products using suitably experienced and trained personnel or in accordance with instructions and licences supplied by Sonardyne and/or the manufacturer of the Products. 5.5 The Customer shall inspect the Products upon receipt and notify any defect in them to Sonardyne in writing within 48 hours of Shipment. If no such notification is received it shall be conclusively presumed that they are complete and in good order, and condition and fit for the purpose for which they are required and in every way satisfactory to the Customer. 5.6 The Customer shall allow Sonardyne or its duly authorised representative, upon reasonable notice given at any time, access to inspect the Products. The Customer shall keep an accurate list of the details of all Products including their location and shall provide an up to date copy to Sonardyne upon request. 5.7 The Customer shall use and maintain the Products in a skilful and proper manner and in accordance with any operating instructions issued for them, and to ensure that the Products are operated and used by properly skilled and trained personnel. 5.8 The Customer shall clean and keep the Products at its own expense at all times in good condition (fair wear and tear excepted) making available to Sonardyne full records thereof. 5.9 The Customer shall make no alteration to the Products and not remove any existing components or identification markings from the Products, unless it is removed in the ordinary course of repair and maintenance (including the removal and replacement of batteries and other consumables, which shall be the responsibility of the Customer) in which case as soon as practicable, a replacement shall be fitted. 5.10 The Customer shall be responsible for the safe usage of the Products and shall comply with all statutory and other obligations of all kinds in relation to the Products and the use of them and at its own expense add to or install with the Products any safety or other equipment required by any applicable law or regulation to be so added or installed for the safe use of the Products. 5.11 The Customer shall protect the Products against distress, execution or seizure. 5.12 The Customer shall operate the Products in accordance with applicable export licencing and permit regulations and shall immediately notify Sonardyne of any breach of the same. 5.13 The Customer shall be liable for any loss, theft, damage or destruction of or to the Products, howsoever caused, (inclusive of whilst in transit), fair wear and tear excepted. 5.14 The Customer shall be liable for the provision of insurances against all liability to third persons for death, personal injury and damage to, or loss of property arising directly or indirectly, out of the use, possession, or operation of the Products for such amount as is prudent in all the circumstances. 5.15 The Customer shall not sell or offer for sale, assign, mortgage or pledge, any of the Products or allow the creation of any charge, encumbrance, lien, or other interest to arise over them. 5.16 The Customer shall be responsible for all losses and liabilities (including legal expenses on a full indemnity basis) arising from the Customer's breach of this Agreement, or from the possession or use by the Customer of the Products or their repossession. 5.17 The Customer shall on or before the expiration or termination of the Hire Term return the Products to Sonardyne at the Customer’s cost, to such address as Sonardyne shall reasonably require (or otherwise to Sonardyne’s head office). In the event of failure to so do, the Customer shall allow Sonardyne and its representatives (and shall ensure that any third parties also allow) access to any premises where the Products are located for the purpose of performing such return at the cost and expense of the Customer. The Customer shall accurately notify Sonardyne in writing of the location/s of the Products upon request. 5.18 The Customer shall continue to pay the Charges for the hire of the Products until returned to Sonardyne. 5.19 In the event that the Products are lost during the Hire Term the Customer shall pay to Sonardyne on demand the full replacement price of any lost item unless otherwise agreed between the parties.

  • Unbundled Loops 2.1.1 BellSouth agrees to offer access to unbundled loops pursuant to the following terms and conditions and at the rates set forth in Attachment 11.

  • Dark Fiber Loop 2.8.4.1 Dark Fiber Loop is an unused optical transmission facility, without attached signal regeneration, multiplexing, aggregation or other electronics, from the demarcation point at an End User’s premises to the End User’s serving wire center. Dark Fiber Loops may be strands of optical fiber existing in aerial or underground structure. BellSouth will not provide line terminating elements, regeneration or other electronics necessary for AFN to utilize Dark Fiber Loops.