TESTING AND STARTUP Clause Samples

TESTING AND STARTUP. A. All elements of the system shall be tested to demonstrate that the total system satisfies all of the requirements of the Drawings and Specifications. All special testing materials and equipment shall be provided by the Contractor. The Contractor shall coordinate and schedule all of his testing and startup work with the Owner. Testing requirements are as follows: 1. All major system components shall be tested at the factory prior to shipment to the job site and shall meet the requirements specified for the project. 2. Factory testing of equipment, systems, or subsystems shall be performed in an input/result format. An input initiated shall produce the correct result for the item being tested. 3. Testing shall be performed in accordance with Owner approved procedures. Each specific test to be performed shall be described in the testing procedure and a space for the tester(s) to sign off on the test shall be provided. 4. Signed forms documenting the results of the test shall be submitted to the Owner and Engineer prior to shipment of the equipment or system. 5. The Owner reserves the right to require a retest of any equipment that the Owner deems marginal with respect to its performance in a test. 6. No equipment shall be shipped until the Owner receives the test data and approves the equipment for shipping. 7. All system components shall be field checked to verify that they have been installed properly and that all connections and terminations have been made correctly. 8. Witnessed field tests of each system component shall be performed along with testing of the complete system. Each test shall be witnessed and signed off by the Contractor and the Owner or the Owner’s designated representative upon satisfactory completion. The Contractor shall notify the Owner a minimum of two (2) weeks prior to the commencement date of the field tests. 9. The Contractor shall be responsible to provide the services of all factory personnel, all calibration and test equipment, and all labor necessary to perform the field testing. 10. All deficiencies in materials or workmanship shall be corrected by the Contractor at no cost to the Owner. Retesting of equipment with corrected deficiencies shall be performed at the direction of the Owner, at no additional cost to the Owner.
View Source
TESTING AND STARTUP. A. All elements of the RADIO TELEMETRY system shall be tested to demonstrate that the total system satisfies all of the requirements of this Specification. All special testing materials and equipment shall be provided by the Contractor. The Contractor shall coordinate and schedule all of his testing and startup work with the Owner. Testing requirements are as follows: 1. All system components shall be checked to verify that they have been installed properly and that all terminations have been made correctly. Witnessed field tests shall be performed on the complete system. Each test shall be witnessed and signed off by the Contractor and the Engineer upon satisfactory completion. The Contractor shall notify the Owner at least one (1) week prior to the commencement date of the field tests.
View Source
TESTING AND STARTUP. Buyer shall have the right, at its expense, to inspect and test run the Equipment at Seller’s factory or point of manufacture before delivery. Buyer shall also have the right, at its expense, to test run the Equipment at Buyer’s plant with the assistance of a representative of Seller within twenty-one (21) days after arrival of the Equipment. Buyer shall supply all necessary utilities, products and packaging materials for all test runs. Within twenty-four (24) hours after test run, Buyer shall either deliver to Seller a statement acknowledging the Equipment conforms to the contract or deliver to Seller a list of deficiencies. If Buyer does not deliver either, the Equipment shall be deemed to conform to the contract and Buyer expressly waives any rights of rejection or to revoke acceptance. In the event Buyer does not invoke the testing and startup procedures set forth herein, Buyer waives all rights to object that the Equipment does not conform to the contract, except those rights set forth in Paragraph 8 above.
View Source
TESTING AND STARTUP. 4.26.1 PSTA is responsible for the startup and testing of the Project facilities, which includes the transit stations and associated amenities, but does not include any utility work. 4.26.2 PSTA will communicate with the City with respect to traffic control, signal adjustments, and other activities associated with activating a BRT system on City facilities. 4.26.3 PSTA will coordinate with the City for bench testing and programming all traffic signal controllers including traffic monitoring cameras, non-invasive vehicle detection, and wireless communication installed at all signalized intersections at construction. All existing traffic signal communication and signal timing shall be maintained by the City throughout construction of the Project. 4.26.4 PSTA will coordinate with the City, testing and programming of communication systems at construction. All existing communication systems shall be maintained by the City throughout construction of the Project.
View Source
TESTING AND STARTUP. ‌ Valley Metro is responsible for the startup and testing of the constructed facilities. Coordination shall occur with the City with respect to traffic control, signal adjustments, and other activities associated with activating a rail transportation system in City streets.
View Source
TESTING AND STARTUP 
View Source

Related to TESTING AND STARTUP

  • Evaluation, Testing, and Monitoring 1. The System Agency may review, test, evaluate and monitor Grantee’s Products and services, as well as associated documentation and technical support for compliance with the Accessibility Standards. Review, testing, evaluation and monitoring may be conducted before and after the award of a contract. Testing and monitoring may include user acceptance testing. Neither the review, testing (including acceptance testing), evaluation or monitoring of any Product or service, nor the absence of review, testing, evaluation or monitoring, will result in a waiver of the State’s right to contest the Grantee’s assertion of compliance with the Accessibility Standards. 2. Grantee agrees to cooperate fully and provide the System Agency and its representatives timely access to Products, records, and other items and information needed to conduct such review, evaluation, testing, and monitoring.

  • Felling and Bucking Felling shall be done to minimize breakage of Included Timber and dam- age to residual timber. Unless agreed otherwise, felling shall be done by saws or shears. Bucking shall be done to permit removal of all minimum pieces set forth in A2. B6.411 Felling in Clearings. Insofar as ground conditions, tree lean, and shape of clearings per- mit, trees shall be felled so that their tops do not extend outside Clearcutting Units, construction clearings, and ar- eas of regeneration cutting. B6.▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇. Stumps shall not exceed, on the side adjacent to the highest ground, the maximum heights set forth in A6, except that occasional stumps of greater heights are acceptable when Purchaser determines that they are necessary for safe and efficient conduct of logging. Unless otherwise agreed, Purchaser shall re-cut high stumps so they will not exceed heights specified in A6 and shall dispose of severed portions in the same manner as other logging debris. The ▇▇▇▇▇ heights shown in A6 were selected with the objective of maximum reasonable utilization of the timber, unless Sale Area Map shows special areas where ▇▇▇▇▇ heights are lower for aesthetic, land treatment, or silvicultural rea- sons.

  • Training and Orientation (a) No employee shall be required to work on any job or operate any piece of equipment until they have received proper training and instruction. (b) The Employer shall provide sufficient and adequate training and/or orientation to any employee working in a new or unfamiliar work area or position.

  • Skidding and Yarding Methods of skid- ding or yarding specified for particular areas, if any, are indicated on Sale Area Map. Outside Clearcutting Units and construction clearings, insofar as ground conditions permit, products shall not be skidded against reserve trees or groups of reproduction and tractors shall be equipped with a winch to facilitate skidding. B6.421 Rigging. Insofar as practicable, needed rigging shall be slung on stumps or trees desig- nated for cutting.

  • Tests, Labs, and Imaging and X rays (diagnostic)