Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 8 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 13.1. As from the official date of entry into force of the 03 06 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 06 series of amendments.
13.2. As from 1 October 1999, Contracting Parties applying this Regulation shall grant approvals only if the requirements of this Regulation, as amended by the 06 series of amendments, are satisfied.
13.3. As from 1 October 2001, Contracting Parties applying this Regulation may refuse to recognize approvals which were not granted in accordance with the 06 series of amendments to this Regulation.
13.4. As from the official date of entry into force of the 07 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 07 series of amendments.
13.5. As from 24 months after the date of entry into force of the 07 series of amendments, Contracting Parties applying this Regulation shall grant approval only if the vehicle type to be approved complies with the requirements of this Regulation as amended by the 07 series of amendments.
13.6. As from 48 months after the date of entry into force of the 07 series of amendments, existing approvals to this Regulation shall cease to be valid, except in the case of vehicle types which comply with the requirements of this Regulation as amended by the 07 series of amendments.
13.7. As from the official date of entry into force of the 08 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 08 series of amendments.
13.8. As from 24 months after the date of entry into force of the 08 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the requirements of this Regulation, as amended by the 08 series of amendments, are satisfied.
13.9. As from 36 months after the date of entry into force of the 08 series of amendments, Contracting Parties applying this Regulation may refuse to recognize approvals which were not granted in accordance with the 08 series of amendments to this Regulation.
13.10. Notwithstanding paragraphs 13.8. and 13.9., approvals of the vehicle categories which are not affected by the 08 series of amendments shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
13.11. As long as there are no requirements forbidding side-facing seats in their national requirements at the time of acceding to this Regulation, Contracting Parties may continue to allow the fitting of side-facing seats for the purpose of national approval and in this case these bus categories cannot be type approved under this Regulation.
13.12. As from the official date of entry into force of the 09 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 09 series of amendments.
13.12.1. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016September 2020, Contracting Parties applying this Regulation shall grant type-not be obliged to accept type approvals only if to the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 preceding series of amendmentsamendments that were first issued on or after 1 September 2020.
13.12.2. As from the official date of entry into force of the 03 series of amendmentsUntil 1 September 2022, Contracting Parties applying this Regulation shall grant accept type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 preceding series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulationthat were first issued before 1 September 2020.
13.12.3. As from 1 July September 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved approvals issued to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 7 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations
Transitional Provisions. 13.1 Transitional provisions applicable to the 05 series of amendments
13.1.1. As from the official date of entry into force of the 03 series of amendments to this Regulation9 October 2014, no Contracting Party applying this UN Regulation shall refuse to grant or refuse to accept UN type-approvals under this UN Regulation as amended by the 03 05 series of amendments.
13.1.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 20169 October 2017, Contracting Parties applying this UN Regulation shall grant not be obliged to accept UN type-approvals only if to the preceding series of amendments, first issued after 9 October 2017 or extensions thereof.
13.1.3. Notwithstanding paragraph 13.1.2., Contracting Parties applying the UN Regulation shall continue to accept UN type-approvals issued according to the preceding series of amendments to the UN Regulation, for the vehicle type which are not equipped with a coupling system to be approved meets charge the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended REESS, or for component or separate technical unit which doesn’t include a coupling part to charge the REESS which are not affected by the 03 changes introduced by the 05 series of amendments
13.1.4. Contracting Parties applying this UN Regulation shall not refuse to grant UN type-approvals according to any preceding series of amendments to this UN Regulation or extensions thereof.
13.2 Transitional provisions applicable to the 06 series of amendments
13.2.1. As from the official date of entry into force of the 03 06 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this UN Regulation shall refuse national to grant or regional type approval of a vehicle refuse to accept UN type-approved to approvals under this UN Regulation as amended by the 02 06 series of amendments to this Regulationamendments.
13.2.2. As from 1 July September 2022, Contracting Parties applying this UN Regulation shall not be obliged to accept for UN type-approvals to the purpose preceding series of national amendments, first issued after 1 September 2022 or regional type approvalextensions thereof.
13.2.3. Notwithstanding paragraph 13.2.2., a vehicle type approved Contracting Parties applying the UN Regulation shall continue to accept UN type-approvals issued according to the preceding series of amendments to this the UN Regulation. Even after , for the date of entry into force of vehicle type which are not equipped with a coupling system to charge the 03 REESS, or for component or separate technical unit which doesn’t include a coupling part to charge the REESS which are not affected by the changes introduced by the 05 or 06 series of amendments to this Regulation, amendments
13.2.4. Contracting Parties applying this UN Regulation may continue for national or regional purposes granting type shall not refuse to grant UN type-approvals and extensions of type approvals according to the any preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this UN Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant or extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. abovethereof.
Appears in 7 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 24.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals type approval under this Regulation as amended by the 03 01 series of amendments.
24.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201612 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant type-approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation.
24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments.
24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) Part II of this Regulation as amended by the 03 01 series of amendments to this Regulation.
24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation.
24.8. As from the official date of entry into force of the 03 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments, .
24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type approvals of components to the vehicle type which be approved meets the requirements of phase 2 or phase 3 Part I of this Regulation as amended by the 03 02 series of amendmentsamendments to this Regulation.
24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been granted issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation24.13. As from 1 July 2022Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall not be obliged continue to accept for the purpose of national or regional type approval, a vehicle type approved approvals granted to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended are not affected by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 7 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 10.1. As from the official date of entry into force of the 04 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 04 series of amendments.
10.2. As from 24 months after the date of entry into force of the 04 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by of the 04 series of amendments.
10.3. As from 36 months after the entry into force of the 04 series of amendments, Contracting Parties applying this Regulation may refuse to grant national/regional approvals and first national registration (first entry into service) of a vehicle which does not meet the requirements of the 04 series of amendments to this Regulation.
10.4. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the 03 series of amendments to this Regulation for vehicles which are not affected by the 04 series of amendments.
10.5. Notwithstanding paragraphs 10.2. and 10.3. above, approvals of vehicles granted to the 03 series of amendments to the Regulation, which are not affected by the 04 series of amendments, shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
10.6. As from the official date of entry into force of the 05 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 05 series of amendments.
10.7. As from 24 months after the date of entry into force of the 05 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 05 series of amendments.
10.8. As from 36 months after the entry into force of the 05 series of amendments, Contracting Parties applying this Regulation may refuse to grant national/regional approvals and first national registration (first entry into service) of a vehicle which does not meet the requirements of the 05 series of amendments to this Regulation.
10.9. Notwithstanding paragraphs 10.7. and 10.8., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 05 series of amendments.
10.10. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval for vehicles which are not affected by the 05 series of amendments.
10.11. As from 48 months after the date of entry into force of the 06 series of amendments, Contracting Parties applying this Regulation shall grant type- approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 06 series of amendments.
10.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type-approvals for existing types which have been issued according to the 05 series of amendments to this Regulation.
10.13. As from 60 months after the date of entry into force of the 06 series of amendments to this Regulation, Contracting Parties applying this Regulation shall not be obliged to accept, for the purpose of national or regional type- approval, a vehicle type-approved to the 05 series of amendments to this Regulation.
10.14. As from the official date of entry into force of the 07 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 07 series of amendments.
10.15. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016September 2020, Contracting Parties applying this Regulation shall grant type-type approvals to vehicle types of Classes I and II, only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 07 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
10.16. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 06 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
10.17. As from 1 July 2022September 2021, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle of Class I or II type approved to the preceding 06 series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 5 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
2.2. above. As from 1 July 2026 for vehicle types other than N2, N3 and M3 and as from 1 July 2027 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 2 according to paragraph 6.2.2. above. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 or phase 2 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the most recent series of amendments are not obliged to accept type approvals which were granted in accordance with any of the preceding series of amendments to this Regulation. Until 30 June 2022, vehicles with a serial hybrid drive train which have a combustion engine with no mechanical coupling to the power train are excluded from the requirements of paragraph 6.2.3. above.
Appears in 4 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 10.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals ECE approval under this Regulation as amended by the 03 02 series of amendments.
10.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, October 2002 Contracting Parties Party applying this Regulation shall grant type-ECE approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation Regulation, as amended by the 03 02 series of amendmentsamendments are satisfied.
10.3. As from 1 October 2006 Contracting Party applying this Regulation may refuse to recognize approvals which were not granted in accordance with the 02 series of amendments to this Regulation.
10.4. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of ECE approval under this Regulation as amended by the 03 series of amendments.
10.5. As from 72 months after the date of entry into force of the 03 series of amendments Contracting Parties applying this Regulation shall grant ECE approval under this Regulation to the new types of cabs only if the requirements of this Regulation, as amended by the 03 series of amendments, are satisfied.
10.6. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approval to the 02 preceding series of amendments to this Regulation.
10.7. Until 30 June 2022, no Contracting Parties applying this Regulation shall continue to grant approvals to those types of vehicles which comply with the requirements of this Regulation as amended by the preceding series of amendments during the 72 months’ period which follows the date of entry into force of the 03 series of amendments.
10.8. No Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-type approved to the 02 03 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
10.9. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals the vehicles to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 Regulation shall remain valid and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged continue to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. abovethem.
Appears in 3 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from 1 November 2012, Contracting Parties applying this Regulation may refuse to grant national or regional approval to a vehicle type of categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the official date of entry into force vehicle type does not meet the requirements of the 03 02 series of amendments to this Regulation.
12.2. As from 1 November 2014, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle in categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the vehicle type does not meet the requirements of the 02 series of amendments to this Regulation.
12.3. As from 1 September 2018, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-UN type approvals under this Regulation as amended by the 03 series of amendments.
12.4. Transitional Provisions Even after 1 September 2018 Contracting Parties applying this Regulation shall continue to accept type approvals granted to the 02 series of amendments to this Regulation. However, Contracting Parties applying this Regulation shall not be obliged to accept, for Phase 1 (see paragraph 6.2.2the purpose of national or regional type approval, Type Approvals to the 02 series of amendments to this Regulation for vehicle types not fitted with Tyre Pressure Monitoring System.
12.5. above) As from 1 July 2016September 2018, Contracting Parties applying this Regulation shall grant type-UN type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
12.6. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to types, regardless of whether they are fitted with a Tyre Pressure Monitoring System or not, on the 02 series basis of amendments to this Regulationthe provisions valid at the time of the original approval.
12.7. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to Notwithstanding the 02 series of amendments to this Regulation. As from 1 July 2022transitional provisions above, Contracting Parties applying whose application of this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 3 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 03 series of amendments.
12.2. As from 12 months after the date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 03 series of amendments.
12.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the preceding series of amendments to this Regulation.
12.4. Contracting Parties applying this Regulation shall continue to grant approvals to those types of vehicles which comply with the requirements of this Regulation as amended by the preceding series of amendments during the 12 month period which follows the date of entry into force of the 03 series of amendments.
12.5. No Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type approved to the 03 series of amendments to this Regulation.
12.6. Until 36 months after the date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
12.7. Even Starting 36 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse first national or regional purposes granting type approvals and extensions registration (first entry into service) of type approvals to a vehicle which does not meet the preceding requirements of the 03 series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation.
12.8. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even 60 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type cease to be approved meets valid, except in the case of vehicle types which comply with the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
12.9. Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the most recent series of amendments are not obliged to accept approvals which were granted in accordance with any of the preceding series of amendments to this Regulation.
12.10. Notwithstanding paragraph 12.7. or 12.8., approvals of the vehicle types to the preceding series of amendments to the Regulation which are not affected by the 03 series of amendments shall remain valid and Contracting Parties applying this the Regulation shall not refuse continue to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveaccept them.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 10.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 02 series of amendments.
10.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201624 months after the date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant type-type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
10.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the preceding series of amendments to this Regulation.
10.4. Until 24 months after the date of entry into force of the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the preceding series of amendments to this Regulation.
10.5. As from 24 months after the date of entry into force of the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
10.6. Even Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this RegulationRegulation are only obliged to accept type approval granted in accordance with the 02 series of amendments.
10.7. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from the official date of entry into force of Supplement 1 July 2020 for vehicle types other than N2 and as to the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval according to Supplement 1 to 02 series of amendments to this Regulation.
10.8. As from 60 months after the date of entry into force of Supplement 1 July 2022 for vehicles types to the 02 series of category N2amendments to this Regulation, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals Supplement 1 to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 24.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals type approval under this Regulation as amended by the 03 01 series of amendments.
24.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201612 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant type-approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation.
24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.74., granted according to the original version of this Regulation, shall remain valid and shall be accepted for the purpose of their installation on vehicles.
24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) Part II of this Regulation as amended by the 03 01 series of amendmentsamendments to this Regulation.
24.5. As from Until 12 months after the official date of entry into force of the 03 01 series of amendmentsamendments to this Regulation, Contracting Parties applying this Regulation shall can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type which meets to the requirements of phase 2 or phase 3 original version of this Regulation as amended by without taking into account the 03 provisions of the 01 series of amendments.
24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been granted issued according to this Regulation without taking into account the 02 provisions of the 01 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation1. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation(Not allocated)
1.2.4.5.1. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this RegulationSystem description:
1.2.4.5.2. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.CNG Pressure regulator(s): yes/no1
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments13.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 03 series of amendments.
13.2. As from 12 months after the date of entry into force of this Regulation, as amended by the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which type, component or separate technical unit to be approved meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
13.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
13.4. Even Starting 48 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse first national registration (first entry into service) of a vehicle, component or regional purposes granting type approvals and extensions separate technical unit which does not meet the requirements of type approvals to the preceding 03 series of amendments to this Regulation.
13.5. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from 36 months after the official date of entry into force of this Regulation, as amended by the 03 04 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which type, to be approved meets the requirements of phase 3 of this Regulation as amended by the 03 04 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation.
13.6. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even 36 months after the date of entry into force of the 03 04 series of amendments to this Regulationamendments, no Contracting Parties applying this Regulation may continue for shall refuse national or regional purposes granting type approvals and extensions approval of type approvals a vehicle approved to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation.
13.7. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N260, N3 and M3 and as from 1 July 2026 for vehicles types months after the date of category N2, N3 and M3entry into force of the 04 series of amendments, Contracting Parties applying this Regulation shall grant type-approvals only if the may refuse first registration of a new vehicle type to be approved meets which does not meet the requirements of phase 3 (see paragraph 6.2.2the 04 series of amendments to this Regulation.
13.8. above) Notwithstanding paragraphs 13.6 and 13.7 approvals of this Regulation as amended vehicle granted to the preceding series of amendments to the Regulation, which are not affected by the 03 04 series of amendments. , shall remain valid and Contracting Parties applying this the Regulation shall not refuse continue to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveaccept them.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 11.1. As from the official date of entry into force of the 03 07 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 07 series of amendments.
11.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201624 months after the date of entry into force of the 07 series of amendments, Contracting Parties applying this Regulation shall grant type-type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 07 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
11.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 preceding series of amendments to this Regulation.
11.4. Until 30 June 202224 months after the date of entry into force of the 07 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 preceding series of amendments to this Regulation.
11.5. As from 1 July 202224 months after the date of entry into force of the 07 series of amendments to this Regulation, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
11.6. Even Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this RegulationRegulation are only obliged to accept type approval granted in accordance with the 07 series amendments.
11.7. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from the official date of entry into force of Supplement 1 July 2020 for vehicle types other than N2 and as to the 07 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval according to Supplement 1 to 07 series of amendments to the UN Regulation.
11.8. As from 60 months after the date of entry into force of Supplement 1 July 2022 for vehicles types to the 07 series of category N2amendments to this Regulation, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals Supplement 1 to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 07 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 12.1. Transitional Provisions applicable to the 02 series of amendments:
12.1.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-UN type approvals under this Regulation as amended by the 03 02 series of amendmentsamendments unless otherwise specified below.
12.1.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016April 2018, Contracting Parties applying this Regulation shall grant type-not be obliged to accept UN type approvals only if to any preceding series of amendments, first issued after 1 April 2018.
12.1.3. Until 1 April 2021, Contracting Parties applying this Regulation shall continue to accept UN type approvals to the vehicle type to be approved meets the requirements of phase 1 preceding series (see paragraph 6.2.2. above01) of amendments to this Regulation, first issued before 1 April 2018.
12.1.4. As from 1 April 2021, Contracting Parties applying this Regulation as amended shall not be obliged to accept UN type approvals issued to the preceding series of amendments to this Regulation.
12.1.5. Notwithstanding paragraph 12.1.4., UN type approvals to the preceding series of amendments to this Regulation, which are not affected by the 02 series of amendments shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
12.1.6. Until 1 April 2020, type approvals according to the 02 series of amendment to this Regulation may be granted to new vehicle types not complying with the red colour for the hands-off warning signal, mandated in paragraph 5.6.2.2.5., and having multi information displays installed in the instrument cluster not capable of indicating red waning signals or using standalone tell-tales only.
12.2. Transitional Provisions applicable to the 03 series of amendments:
12.2.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant or refuse to accept UN type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.2.2. As from 1 July 2022September 2019, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of UN type approvals to the preceding series (02) of amendments to this Regulationamendments, first issued after 1 September 2019.
12.2.3. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2September 2021, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type continue to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant accept UN type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 preceding series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above02) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationSeptember 2019.
12.2.4. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2021, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved approval issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.2.5. Even after Notwithstanding paragraph and 12.2.4., Contracting Parties applying this Regulation shall continue to accept UN type approvals issued according to a preceding series of amendments to this Regulation, for vehicles which are not affected by the provisions introduced with the 03 series of amendments.
12.3. Transitional Provisions applicable to the 04 series of amendments:
12.3.1. As from the official date of entry into force of the 03 04 series of amendments amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept UN type approvals under this RegulationRegulation as amended by the 04 series of amendments.
12.3.2. As from 1 September 2023, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of shall not be obliged to accept UN type approvals to phase the preceding series of amendments, first issued after 1 (see paragraph 6.2.2September 2023.
12.3.3. above) or Until 1 September 2025, Contracting Parties applying this Regulation shall continue to accept UN type approvals to the preceding series of amendments to this Regulation, first issued before 1 September 2023.
12.3.4. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3September 2025, Contracting Parties applying this Regulation shall grant type-not be obliged to accept type approvals only if issued to the vehicle type preceding series of amendments to be approved meets the requirements of phase 3 (see this Regulation.
12.3.5. Notwithstanding paragraph 6.2.212.3.2. above) of and 12.3.4., Contracting Parties applying this Regulation as amended shall continue to accept UN type approvals issued according to a preceding series of amendments to this Regulation, for vehicles which are not affected by the 03 provisions of paragraph 5.1.6.3.9. introduced with the 04 series of amendments.
12.4. General transitional provisions:
12.4.1. Contracting Parties applying this Regulation shall not refuse to grant extensions of UN type approvals for existing types which have been granted according to phase 2 according any preceding series of amendments to paragraph 6.2.2this Regulation or extensions thereof. above.Annex 1 Communication (Maximum format: A4 (210 x 297 mm) issued by: Name of administration: Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a vehicle type with regard to steering equipment pursuant to UN Regulation No. 79 Approval No. ..................
1. Trade name or mark of vehicle ....................................................................................
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 10.1. As from the official date of entry into force of supplement 1 to the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by Supplement 1 to the 02 series of amendments.
10.2. As from 12 months after the entry into force of the 02 series of amendments Contracting Parties applying this Regulation shall grant ECE approvals only to those types of vehicles which comply with the requirements of this Regulation as amended by the 02 series of amendments.
10.3. As from 60 months after the entry into service of the 02 series of amendments Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of vehicles which do not meet the requirements of this Regulation as amended by the 02 series of amendments.
10.4. As from 36 months after the entry into force of Supplement 1 to the 02 series of amendments Contracting Parties applying this Regulation shall grant ECE approvals only to those types of vehicles which comply with the requirements of this Regulation. as amended by Supplement 1 to the 02 series of amendments.
10.5. As from 84 months after the entry into force of Supplement 1 to the 02 series of amendments Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of vehicles which do not meet the requirements of this regulation as amended by Supplement 1 to the 02 series of amendments.
10.6. As from the official date of entry into force of the 03 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals ECE approval under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
10.7. As from 24 months after the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type ECE approvals only to the vehicle type those types of vehicles which meets comply with the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. However, in the case of vehicles having an electrical power train operating on high voltage, an additional period of 12 months is granted provided that the manufacturer demonstrates, to the satisfaction of the Technical Service, that the vehicle provides equivalent levels of safety to those required by this Regulation as amended by the 03 series of amendments.
10.8. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved issued to the preceding series of amendments to this Regulation. Even after , when this extension does not entail any change to the date of entry into force propulsion system of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulationvehicle. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. FurthermoreHowever, as from 48 months after the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type extensions to approvals issued to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 previous series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for granted after this date in respect of vehicles having an electrical power train operating on high voltage.
10.9. Where at the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date time of entry into force of the 03 series of amendments to this Regulation national requirements exist to address the safety provisions of vehicles having an electrical power train operating on high voltage, those Contracting Parties applying this Regulation may refuse national [approval][registration] of such vehicles not meeting the national requirements, unless these vehicles are approved to the 03 series of amendments to this Regulation.
10.10. As from 48 months after the entry into force of the 04 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse national or regional purposes granting type approvals approval and extensions may refuse first national or regional registration (first entry into service) of type approvals to phase 1 (see paragraph 6.2.2. above) or a vehicle having an electrical power train operating on high voltage which does not meet the preceding requirements of the 04 series of amendments to this Regulation.
10.11. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for Approvals of the vehicles types to the 02 series of category N2, N3 and M3, Contracting Parties applying amendments to this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended which are not affected by the 03 series of amendments. amendments shall remain valid and Contracting Parties applying this the Regulation shall not refuse continue to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveaccept them.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 16.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 01 series of amendments.
16.2. As from 1 September 2018, Contracting Parties applying this Regulation shall grant approvals only if the Enhanced Child Restraint System type to be approved meets the requirements of this Regulation as amended by the 01 series of amendments.
16.3. Until 1 September 2018, Contracting Parties applying this Regulation can continue to grant type approvals to Enhanced Child Restraint Systems which comply with the requirements of this Regulation as in its original version.
16.4. Until 1 September 2020, Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the original version of this Regulation.
16.5. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under to this Regulation as amended by the 03 02 series of amendments.
16.6. Transitional Provisions for Phase Until 1 (see paragraph 6.2.2September 2020, type approvals to the preceding series of amendments to the Regulation which are not affected by the 02 series of amendments to the Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
16.7. above) As from Until 1 July 2016September 2022, Contracting Parties applying this Regulation shall not refuse to grant type-approvals only if extensions of approval to the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 01 series of amendmentsamendments to this Regulation.
16.8. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant type or refuse to accept UN type-approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments.
16.9. As from 1 September 2020, Contracting Parties applying this Regulation shall not refuse be obliged to grant extensions of type accept UN type-approvals for existing types which have been granted according to the 02 preceding series of amendments to this Regulation. Until 30 June 2022amendments, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulationfirst issued after 1 September 2020.
16.10. As from 1 July September 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved type-approvals issued to the preceding series of amendments to this Regulation.
16.11. Even after the date of entry into force of the 03 series of amendments to this RegulationNotwithstanding paragraphs 16.9 and 16.10, Contracting Parties applying this the UN Regulation may shall continue for national or regional purposes granting type to accept UN type-approvals and extensions of type approvals issued according to the preceding series of amendments to this the UN Regulation. Transitional Provisions , for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for the vehicles/vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if systems which are not affected by the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended changes introduced by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 12.1. As from 1 November 2012, Contracting Parties applying this Regulation may refuse to grant national or regional approval to a vehicle type of categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the official date of entry into force vehicle type does not meet the requirements of the 03 02 series of amendments to this Regulation.
12.2. As from 1 November 2014, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle in categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the vehicle type does not meet the requirements of the 02 series of amendments to this Regulation.
12.3. As from 1 September 2018, no Contracting Party applying this UN Regulation shall refuse to grant or refuse to accept type-UN type approvals under this UN Regulation as amended by the 03 series of amendments.
12.4. Transitional Provisions for Phase Even after 1 (see paragraph 6.2.2September 2018 Contracting Parties applying this regulation shall continue to accept type approvals granted to the 02 series of amendments to this regulation. above) As from 1 July 2016However, Contracting Parties applying this Regulation shall not be obliged to accept, for the purpose of national or regional type approval, Type Approvals to the 02 series of amendments to this regulation for vehicle types not fitted with Tyre Pressure Monitoring System.
12.5. As from 1 September 2018, Contracting Parties applying this UN Regulation shall grant type-UN type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this UN Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
12.6. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to types, regardless of whether they are fitted with a Tyre Pressure Monitoring System or not, on the 02 series basis of amendments to this Regulationthe provisions valid at the time of the original approval.
12.7. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to Notwithstanding the 02 series of amendments to this Regulation. As from 1 July 2022transitional provisions above, Contracting Parties applying whose application of this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 01 series of amendments.
12.2. As from 24 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 01 series of amendments.
12.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of approvals for existing types which have been granted according to the original version of this Regulation.
12.4. Even after the entry into force of the 01 series of amendments to this Regulation, type approvals of the vehicles to the original version of this Regulation shall remain valid. Contracting Parties applying this Regulation shall continue to accept them.
12.5. Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 01 series of amendments are not obliged to accept approvals which were granted in accordance with the original version of this Regulation.
12.6. As from the official date of entry into force of the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 02 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.7. As from 1 July 2022September 2023, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulationamendments, first issued after 1 September 2023.
12.8. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, September 2024 Contracting Parties applying this Regulation shall grant accept type approvals only if to the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 preceding series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationSeptember 2023.
12.9. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2024, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved approvals issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.10. Even Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation.
12.11. Transitional Provisions for Phase 3 (see Notwithstanding paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M312.4, Contracting Parties applying this Regulation shall grant type-continue to accept type approvals only if issued according to the preceding series of amendments to this Regulation, for the vehicles/vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended systems which are not affected by the 03 changes introduced by the 02 series of amendments.
12.12. Contracting Parties applying this Regulation may grant type approvals according to any preceding series of amendments to this Regulation.
12.13. Contracting Parties applying this Regulation shall not refuse continue to grant extensions of existing approvals to any preceding series of amendments to this Regulation. Annex 1 Annex 1 Communication (maximum format: A4 (210 x 297 mm)) issued by: Name of administration: concerning2: Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a type approvals for existing types which have been granted according of vehicle with regard to phase 2 according the driver's forward field of vision pursuant to paragraph 6.2.2Regulation No. above125 Approval No................................…. Extension No......................................….
1. Trademark: ................................................................................................
2. Type and trade name(s): ...............................................................................................
3. Name and address of manufacturer: .............................................................................
4. If applicable, name and address of manufacturer's representative: .............................. ...................................................................................................................................... 5. Brief description of vehicle: .........................................................................................
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 22.1. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals an application for approval under this Regulation as amended by the 03 series of amendments.
22.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201612 months after entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant type-approvals to a type of device for indirect vision only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
22.3. As from the official date of 18 months after entry into force of the 03 series of amendmentsamendments to this Regulation, Contracting Parties applying this Regulation shall grant type approvals to a type of vehicle with regard to the installation of devices for indirect vision only if the type of vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
22.4. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even 24 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting refuse to recognize approvals of a type approvals and extensions of type approvals vehicle with regard to the preceding installation of a camera-monitor system for indirect vision or type of camera-monitor system for indirect vision which have not been granted in accordance with the 03 series of amendments to this Regulation.
22.5. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 26 January 2010 for vehicles types of category N2M1 and N1 and from 26 January 2007 for vehicles of other categories, Contracting Parties applying this Regulation may refuse to recognize approvals of a device for indirect vision which have not been granted in accordance with the 02 series of amendments to this Regulation.
22.6. Approvals which were granted to devices for indirect vision of Class I or III pursuant to this Regulation in its original form (00 series) or modified by the 01 or 02 series of amendments before the date of entry into force of the 03 series of amendments shall remain valid and Contracting Parties shall continue to accept them. Contracting Parties shall not refuse to grant type extensions to approvals only if granted to the vehicle type original version, the 01 or 02 series of amendments.
22.7. Notwithstanding the provisions of paragraph 22.2., approvals which were granted to be approved meets mirrors of Classes II, IV, V, VI or VII pursuant to this Regulation as modified by the requirements 02 series of phase 2 (see paragraph 6.2.2amendments before the date of entry into force of the 03 series of amendments shall remain valid and Contracting Parties shall continue to accept them. above) Contracting Parties shall not refuse to grant extensions to approvals granted to the 02 series of amendments.
22.8. The provisions of this Regulation shall not prohibit the approval of a type of vehicle with regard to the mounting of devices for indirect vision pursuant to this Regulation as amended modified by the 03 series of amendments, if all or part of the devices for indirect vision of Class I or III, with which it is fitted, bear the approval mark prescribed by this Regulation in its original form (00 series) or modified by the 01 or 02 series of amendments.
22.9. FurthermoreThe provisions of this Regulation shall not prohibit the approval of a type of vehicle with regard to the mounting of devices for indirect vision pursuant to this Regulation as modified by the 03 series of amendments, as if all or part of the rear-view mirrors of Classes II, IV, V, VI or VII, with which it is fitted, bear the approval mark prescribed by the 02 series of amendments of this Regulation.
22.10. Notwithstanding the provisions of paragraphs 22.2., 22.4. and 22.5. above, for the purpose of replacement parts Contracting Parties applying this Regulation shall continue to grant approvals according 02 series of amendments to this Regulation, to devices for indirect vision for use on vehicle types which have been approved before the date mentioned in paragraph 22.2. above pursuant to the 02 series of amendments of Regulation No. 46, and, where applicable, subsequent extensions to these approvals.
22.11. As from the official date of entry into force of the 03 04 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse an application for approval under this Regulation as amended by the 04 series of amendments.
22.12. As from 30 June 2014, Contracting Parties applying this Regulation shall grant type approvals to a type of device for indirect vision only if the vehicle type which of device meets the requirements of phase 3 of this Regulation as amended by the 03 04 series of amendments.
22.13. As from 30 June 2014, Contracting Parties applying this Regulation shall grant approvals to a type of vehicle with regard to the installation of devices for indirect vision only if the type of vehicle meets the requirements of this Regulation as amended by the 04 series of amendments.
22.14. As from 30 June 2015, Contracting Parties applying this Regulation shall not be obliged to accept approvals of a type of vehicle or type of device for indirect vision which have not been granted in accordance with the 04 series of amendments to this Regulation.
22.15. Notwithstanding paragraph 22.14. above, type approvals granted to the preceding series of amendments to the Regulation, which are not affected by the 04 series of amendments, shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
22.16. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of vehicles or devices, which have been are not affected by the 04 series of amendments, granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation.
22.17. Notwithstanding the provisions of paragraphs 22.2., Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.222.4., 22.5., 22.13. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.and
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 01 series of amendment.
12.2. As from 24 months after the official date of entry into force of the 01 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type or component type to be approved meet the requirements of this Regulation as amended by the 01 series of amendments.
12.3. Starting from 60 months after the official date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 01 series of amendments.
12.4. Even after the date of entry into force of the 01 series of amendments to this Regulation, approvals of the components to the preceding series of amendments to the Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
12.5. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the 00 series of amendments to this Regulation.
12.6. As from the official date of entry into force of the 02 series of amendments, no Contracting Parties applying this Regulation shall refuse to grant approval under this Regulation as amended by the 02 series of amendment.
12.7. As from 48 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the component type to be approved meet the requirements of this Regulation as amended by the 02 series of amendments.
12.8. As from 60 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets meet the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments.
12.9. Starting 96 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 02 series of amendments.
12.10. Even after the date of entry into force of the 02 series of amendments, approvals of the components to the preceding series of amendments to the regulation shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
12.11. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties applying this Regulation shall refuse to grant approval under this Regulation as amended by the 03 series of amendment.
12.12. As from 1 September 2019, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which meets or component type to be approved meet the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.13. As from 1 July 2022September 2021, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose may refuse first national registration (first entry into service) of national or regional type approval, a vehicle type approved to which does not meet the preceding requirements of this Regulation as amended by the 03 series of amendments to this Regulationamendments.
12.14. Even after the date of entry into force of the 03 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals the components to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 the regulation shall remain valid and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this the Regulation shall grant type approvals only if the vehicle type continue to be approved meets the requirements of phase 2 (see accept them. In accordance with paragraph 6.2.23.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals relating to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved with regard to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force burning behaviour of the 03 series components used in the interior compartment, the engine compartment and any separate heating compartment and/or the capability to repel fuel or lubricant of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals insulation materials used in the engine compartment and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveany separate heating compartment.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 12.1. Transitional Provisions applicable to the 02 series of amendments:
12.1.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-UN type approvals under this Regulation as amended by the 03 02 series of amendmentsamendments unless otherwise specified below.
12.1.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016April 2018, Contracting Parties applying this Regulation shall grant type-not be obliged to accept UN type approvals only if to any preceding series of amendments, first issued after 1 April 2018.
12.1.3. Until 1 April 2021, Contracting Parties applying this Regulation shall continue to accept UN type approvals to the vehicle type to be approved meets the requirements of phase 1 preceding series (see paragraph 6.2.2. above01) of amendments to this Regulation, first issued before 1 April 2018.
12.1.4. As from 1 April 2021, Contracting Parties applying this Regulation as amended shall not be obliged to accept UN type approvals issued to the preceding series of amendments to this Regulation.
12.1.5. Notwithstanding paragraph 12.1.4., UN type approvals to the preceding series of amendments to this Regulation, which are not affected by the 02 series of amendments shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
12.1.6. Until 1 April 2020, type approvals according to the 02 series of amendment to this Regulation may be granted to new vehicle types not complying with the red colour for the hands-off warning signal, mandated in paragraph 5.6.2.2.5., and having multi information displays installed in the instrument cluster not capable of indicating red waning signals or using standalone tell-tales only.
12.2. Transitional Provisions applicable to the 03 series of amendments:
12.2.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant or refuse to accept UN type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.2.2. As from 1 July 2022September 2019, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of UN type approvals to the preceding series (02) of amendments to this Regulationamendments, first issued after 1 September 2019.
12.2.3. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2September 2021, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type continue to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant accept UN type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 preceding series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above02) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationSeptember 2019.
12.2.4. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2021, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved approval issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.2.5. Even after the date of entry into force of the 03 Notwithstanding paragraph and 12.2.4., Contracting Parties applying this Regulation shall continue to accept UN type approvals issued according to a preceding series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if which are not affected by the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by provisions introduced with the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 12.1. Transitional provisions applicable to the 01 series of amendments
12.1.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 01 series of amendments.
12.1.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016May 2024, Contracting Parties applying this Regulation shall grant type-not be obliged to accept type approvals only if to the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) original version of this Regulation, first issued after 1 May 2024.
12.1.3. Until 1 May 2026, Contracting Parties applying this Regulation as amended shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024.
12.1.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 10 The UNECE secretariats provides the online platform (“/343 Application”) for exchange of such information with the secretariat: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/trans/main/wp29/datasharing.html
12.1.5. Notwithstanding paragraph 12.1.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version of this Regulation, for vehicles which are not affected by the 03 changes introduced by the 01 Series of amendments.
12.2. Transitional provisions applicable to the 02 series of amendments
12.2.1. As from the official date of entry into force of the 03 02 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national to grant or regional refuse to accept type approval of a vehicle type-approved to approvals under this Regulation as amended by the 02 series of amendments to this Regulationamendments.
12.2.2. As from 1 July 2022May 2024, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to of this Regulation, first issued after 1 May 2024.
12.2.3. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N22026, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant accept type approvals to the vehicle type which meets the requirements of phase 3 preceding series of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase Regulation, first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationMay 2024.
12.2.4. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N22026, Contracting Parties applying this Regulation shall not be obliged to accept for type approvals issued to the purpose preceding series of national or regional this Regulation.
12.2.5. Notwithstanding paragraph 12.2.4., Contracting Parties applying this Regulation shall continue to accept type approval, a vehicle type approved approvals issued according to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after , for vehicles which are not affected by the date of entry into force of changes introduced by the 03 02 series of amendments to (i.e. car-to- car and/or car-to-pedestrian approvals are not affected by this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. abovenew 02 series).
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 11.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 02 series of amendments.
11.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016the date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall may refuse to grant type-approvals only if to variable speed engines, or engine families, of the vehicle type to be approved meets power bands H, I, J and K which do not meet the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments.
11.3. As from the date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation may refuse the placing on the market of variable speed engines, or engine families, included in the power bands H, I, J and K not approved under this Regulation as amended by the series 02 of amendments.
11.4. As from 1 January 2010, Contracting Parties applying this Regulation may refuse to grant approvals to constant speed engines, or engine families, of the power bands H, I and K which do not meet the requirements of this Regulation as amended by the 02 series of amendments.
11.5. As from 1 January 2011, Contracting Parties applying this Regulation may refuse to grant approvals to constant speed engines, or engine families, of the power band J which do not meet the requirements of this Regulation as amended by the 02 series of amendments.
11.6. As from 1 January 2011, Contracting Parties applying this Regulation may refuse the placing on the market of constant speed engines, or engine families, included in the power bands H, I and K not approved under this Regulation as amended by the series 02 of amendments.
11.7. As from 1 January 2012, Contracting Parties applying this Regulation may refuse the placing on the market of constant speed engines, or engine families, included in the power band J not approved under this Regulation as amended by the series 02 of amendments.
11.8. By derogation to the provisions stipulated on paragraphs 11.3., 11.6. and 11.7., Contracting Parties applying this Regulation may postpone each date mentioned in the above paragraphs for two years in respect of engines with a production date prior to the said dates.
11.9. By derogation to the provisions stipulated in paragraphs 11.3., 11.6. and 11.7., Contracting Parties applying this Regulation may continue to permit the placing on the market of engines approved on the basis of a previous technical standard, provided that the engines are intended as replacement for fitting in vehicles in use, and that it is not technically feasible for the engines in question to satisfy the new requirements of the 02 series of amendments.
11.10. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of approval under this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
11.11. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall may refuse to grant type approvals to variable speed engines, or engine families, of the vehicle type power bands L, M, N and P which meets do not meet the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation.
11.12. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2January 2013, Contracting Parties applying this Regulation shall may refuse to grant approvals to variable speed engines, or engine families, of the power band Q which do not be obliged to accept for meet the purpose requirements of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or this Regulation as amended by the preceding 03 series of amendments amendments.
11.13. As from 1 October 2013, Contracting Parties applying this Regulation may refuse to grant approvals to variable speed engines, or engine families, of the power band R which do not meet the requirements of this RegulationRegulation as amended by the 03 series of amendments.
11.14. Even after As from the date of entry into force of the 03 series of amendments amendments, Contracting Parties applying this Regulation may refuse the placing on the market of variable speed engines, or engine families, included in the power bands L, M, N and P not approved under this Regulation as amended by the series 03 of amendments.
11.15. As from 1 January 2014, Contracting Parties applying this Regulation may refuse the placing on the market of variable speed engines, or engine families, included in the power band Q not approved under this Regulation as amended by the series 03 of amendments.
11.16. As from 1 October 2014, Contracting Parties applying this Regulation may refuse the placing on the market of variable speed engines, or engine families, included in the power band R not approved under this Regulation as amended by the series 03 of amendments.
11.17. By derogation to the provisions stipulated in paragraphs 11.14. to 11.16. Contracting Parties applying this RegulationRegulation shall postpone each date mentioned in the above paragraphs for two years in respect of engines with a production date prior to the said dates.
11.18. By derogation to the provisions stipulated in paragraphs 11.14., 11.15. and 11.16., Contracting Parties applying this Regulation may continue to permit the placing on the market of engines approved on the basis of a previous technical standard, provided that the engines are intended as replacement for national or regional purposes granting type approvals fitting in vehicles in use, and extensions of type approvals that it is not technically feasible for the engines in question to phase 1 (see paragraph 6.2.2. above) or satisfy the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the new requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 10.1. As from the official date of entry into force of the 04 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 04 series of amendments.
10.2. As from 24 months after the date of entry into force of the 04 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by of the 04 series of amendments.
10.3. As from 36 months after the entry into force of the 04 series of amendments, Contracting Parties applying this Regulation may refuse to grant national/regional approvals and first national registration (first entry into service) of a vehicle which does not meet the requirements of the 04 series of amendments to this Regulation.
10.4. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the 03 series of amendments to this Regulation for vehicles which are not affected by the 04 series of amendments.
10.5. Notwithstanding paragraphs 10.2. and 10.3. above, approvals of vehicles granted to the 03 series of amendments to the Regulation, which are not affected by the 04 series of amendments, shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
10.6. As from the official date of entry into force of the 05 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 05 series of amendments.
10.7. As from 24 months after the date of entry into force of the 05 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 05 series of amendments.
10.8. As from 36 months after the entry into force of the 05 series of amendments, Contracting Parties applying this Regulation may refuse to grant national/regional approvals and first national registration (first entry into service) of a vehicle which does not meet the requirements of the 05 series of amendments to this Regulation.
10.9. As from the official date of entry into force of the 06 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 06 series of amendments.
10.10. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201648 months after the date of entry into force of the 06 series of amendments, Contracting Parties applying this Regulation shall grant type-type- approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 06 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
10.11. Contracting Parties applying this Regulation shall not refuse to grant extensions of type type-approvals for existing types which have been granted issued according to the 02 05 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
10.12. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even 60 months after the date of entry into force of the 03 06 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type type- approval, a vehicle type type-approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding 05 series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 17.1. As from the official date of entry into force of the 03 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 02 series of amendments.
17.2. As from 12 months after the date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant ECE approvals only if vehicle type to be approved meets the requirements of this Regulation as amended by the 02 series of amendments.
17.3. Until 12 months after the date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse national type approval of a vehicle type approved to the preceding series of amendments to this Regulation.
17.4. Starting 24 months after the entry into force of the 02 series of amendments to this Regulation, Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of a vehicle which does not meet the requirements of the 02 series of amendments to this Regulation.
17.5. As from the official date of entry into force of the Supplement 3 to the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals ECE approval under this Regulation as amended by Supplement 3 to the 03 02 series of amendments.
17.6. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016Even after the entry into force of the Supplement 3 to the 02 series of amendments to this Regulation, approvals of the vehicles to the preceding supplements to the 02 series of amendments shall remain valid and Contracting Parties applying this Regulation shall continue to grant type-extensions to such approvals only if the vehicle type and shall continue to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendmentsaccept them.
17.7. As from the official date of entry into force of the 03 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 03 series of amendments.
17.8. As from 1 September 2018, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which to be approved meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
17.9. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
17.10. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may shall continue for national or regional purposes granting type approvals and extensions of to accept type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this the Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended which are not affected by the 03 series of amendments.
17.11. Furthermore, as from Notwithstanding the official date of entry into force of the 03 series of amendmentstransitional provisions above, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 whose application of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 10.1. As from the official date of entry into force of supplement 1 to the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by Supplement 1 to the 02 series of amendments.
10.2. As from 12 months after the entry into force of the 02 series of amendments Contracting Parties applying this Regulation shall grant approvals only to those types of vehicles which comply with the requirements of this Regulation as amended by the 02 series of amendments.
10.3. As from 60 months after the entry into service of the 02 series of amendments Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of vehicles which do not meet the requirements of this Regulation as amended by the 02 series of amendments.
10.4. As from 36 months after the entry into force of Supplement 1 to the 02 series of amendments Contracting Parties applying this Regulation shall grant approvals only to those types of vehicles which comply with the requirements of this Regulation. as amended by Supplement 1 to the 02 series of amendments.
10.5. As from 84 months after the entry into force of Supplement 1 to the 02 series of amendments Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of vehicles which do not meet the requirements of this regulation as amended by Supplement 1 to the 02 series of amendments.
10.6. As from the official date of entry into force of the 03 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
10.7. As from 24 months after the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals only to the vehicle type those types of vehicles which meets comply with the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. However, in the case of vehicles having an electrical power train operating on high voltage, an additional period of 12 months is granted provided that the manufacturer demonstrates, to the satisfaction of the Technical Service, that the vehicle provides equivalent levels of safety to those required by this Regulation as amended by the 03 series of amendments.
10.8. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved issued to the preceding series of amendments to this Regulation, when this extension does not entail any change to the propulsion system of the vehicle. Even However, as from 48 months after the official date of entry into force of the 03 series of amendments, extensions to approvals issued to the previous series of amendments shall not be granted after this date in respect of vehicles having an electrical power train operating on high voltage.
10.9. Where at the time of entry into force of the 03 series of amendments to this Regulation national requirements exist to address the safety provisions of vehicles having an electrical power train operating on high voltage, those Contracting Parties applying this Regulation may refuse national approval of such vehicles not meeting the national requirements, unless these vehicles are approved to the 03 series of amendments to this Regulation.
10.10. As from 48 months after the entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse national or regional purposes granting type approvals approval and extensions may refuse first national or regional registration (first entry into service) of type approvals to a vehicle having an electrical power train operating on high voltage which does not meet the preceding requirements of the 03 series of amendments to this Regulation.
10.11. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force Approvals of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals vehicles to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or which are not affected by the 02 03 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 shall remain valid and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this the Regulation shall not be obliged continue to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1them.
10.12. above) or the preceding series of amendments to this Regulation. Even Until 18 months after the date of entry into force of the Supplement 3 to the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may can continue for national or regional purposes granting type approvals and extensions of to grant type approvals to phase 1 (see paragraph 6.2.2the 03 series of amendments to this Regulation without taking into account the provisions of Supplement 3.
10.13. above) As from the official date of entry into force of the 04 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 04 series of amendments.
10.14. As from 5 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the preceding series of amendments, first issued after 5 July 2022.
10.15. Until 5 July 2024, Contracting Parties applying this Regulation shall accept type approvals to the preceding series of amendments, first issued before 5 July 2022.
10.16. As from 5 July 2024, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the preceding series of amendments to this Regulation.
10.17. Transitional Provisions for Phase 3 (see Notwithstanding paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M310.16., Contracting Parties applying this Regulation shall grant type-continue to accept type approvals only if issued according to the vehicle type preceding series of amendments to be approved meets this Regulation, for the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended vehicles which are not affected by the 03 changes introduced by the 04 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 01 series of amendment.
12.2. As from 24 months after the official date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type or component type to be approved meet the requirements of this Regulation as amended by the 01 series of amendments.
12.3. Starting from 60 months after the official date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 01 series of amendments.
12.4. Even after the date of entry into force of the 01 series of amendments to this Regulation, approvals of the components to the preceding series of amendments to the Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
12.5. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the 00 series of amendments to this Regulation.
12.6. As from the official date of entry into force of the 02 series of amendments, no Contracting Parties applying this Regulation shall refuse to grant approval under this Regulation as amended by the 02 series of amendment.
12.7. As from 48 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the component type to be approved meet the requirements of this Regulation as amended by the 02 series of amendments.
12.8. As from 60 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meet the requirements of this Regulation as amended by the 02 series of amendments.
12.9. Starting 96 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 02 series of amendments.
12.10. Even after the date of entry into force of the 02 series of amendments, approvals of the components to the preceding series of amendments to the regulation shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
12.11. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties applying this Regulation shall refuse to grant approval under this Regulation as amended by the 03 series of amendment.
12.12. As from 1 September 2019, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type or component type to be approved meet the requirements of this Regulation as amended by the 03 series of amendments.
12.13. As from 1 September 2021, Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 03 series of amendments.
12.14. Even after the date of entry into force of the 03 series of amendments, approvals of the components to the preceding series of amendments to this Regulationthe regulation shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
12.15. As from the official date of entry into force of the 04 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 04 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.16. As from 1 July 2022September 2023, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose type-approvals of national vehicle or regional type approval, a vehicle type approved component to the preceding series of amendments to this Regulationamendments, first issued after 1 September 2023.
12.17. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2September 2025, Contracting Parties applying this Regulation shall grant type accept type-approvals only if of vehicle or component to the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 preceding series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationSeptember 2023.
12.18. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2025, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose type-approvals of national vehicle or regional type approval, a vehicle type approved component issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Transitional Provisions. 12.1. Transitional provisions applicable to the 01 series of amendments
12.1.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 01 series of amendments.
12.1.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016May 2024, Contracting Parties applying this Regulation shall grant type-not be obliged to accept type approvals only if to the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) original version of this Regulation, first issued after 1 May 2024. 10 The UNECE secretariats provides the online platform (“/343 Application”) for exchange of such information with the secretariat: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/trans/main/wp29/datasharing.html
12.1.3. Until 1 May 2026, Contracting Parties applying this Regulation as amended shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024.
12.1.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation.
12.1.5. Notwithstanding paragraph 12.1.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version of this Regulation, for vehicles which are not affected by the 03 changes introduced by the 01 Series of amendments.
12.2. Transitional provisions applicable to the 02 series of amendments
12.2.1. As from the official date of entry into force of the 03 02 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national to grant or regional refuse to accept type approval of a vehicle type-approved to approvals under this Regulation as amended by the 02 series of amendments to this Regulationamendments.
12.2.2. As from 1 July 2022May 2024, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to of this Regulation, first issued after 1 May 2024.
12.2.3. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N22026, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant accept type approvals to the vehicle type which meets the requirements of phase 3 preceding series of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase Regulation, first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationMay 2024.
12.2.4. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N22026, Contracting Parties applying this Regulation shall not be obliged to accept for type approvals issued to the purpose preceding series of national or regional this Regulation.
12.2.5. Notwithstanding paragraph 12.2.4., Contracting Parties applying this Regulation shall continue to accept type approval, a vehicle type approved approvals issued according to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after , for vehicles which are not affected by the date of entry into force of changes introduced by the 03 02 series of amendments to (i.e. car-to- car and/or car-to-pedestrian approvals are not affected by this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. abovenew 02 series).
Appears in 1 contract
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 01 series of amendment.
12.2. As from 24 months after the official date of entry into force of the 01 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type or component type to be approved meet the requirements of this Regulation as amended by the 01 series of amendments.
12.3. Starting from 60 months after the official date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 01 series of amendments.
12.4. Even after the date of entry into force of the 01 series of amendments to this Regulation, approvals of the components to the preceding series of amendments to the Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
12.5. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the 00 series of amendments to this Regulation.
12.6. As from the official date of entry into force of the 02 series of amendments, no Contracting Parties applying this Regulation shall refuse to grant approval under this Regulation as amended by the 02 series of amendment.
12.7. As from 48 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the component type to be approved meet the requirements of this Regulation as amended by the 02 series of amendments.
12.8. As from 60 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets meet the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments.
12.9. Starting 96 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 02 series of amendments.
12.10. Even after the date of entry into force of the 02 series of amendments, approvals of the components to the preceding series of amendments to the regulation shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
12.11. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties applying this Regulation shall refuse to grant approval under this Regulation as amended by the 03 series of amendment.
12.12. As from 1 September 2019, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which meets or component type to be approved meet the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.13. As from 1 July 2022September 2021, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose may refuse first national registration (first entry into service) of national or regional type approval, a vehicle type approved to which does not meet the preceding requirements of this Regulation as amended by the 03 series of amendments to this Regulationamendments.
12.14. Even after the date of entry into force of the 03 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals the components to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 the regulation shall remain valid and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this the Regulation shall grant type approvals only if the continue to accept them. Annex 1 Information document for vehicle type to be approved meets the requirements of phase 2 (see In accordance with paragraph 6.2.23.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals relating to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved with regard to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force burning behaviour of the 03 series components used in the interior compartment, the engine compartment and any separate heating compartment and/or the capability to repel fuel or lubricant of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals insulation materials used in the engine compartment and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveany separate heating compartment.
Appears in 1 contract
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments13.1. As from the official date of entry into force of the 03 06 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 06 series of amendments.
13.2. As from 1 October 1999, Contracting Parties applying this Regulation shall grant approvals only if the requirements of this Regulation, as amended by the 06 series of amendments, are satisfied.
13.3. As from 1 October 2001, Contracting Parties applying this Regulation may refuse to recognize approvals which were not granted in accordance with the 06 series of amendments to this Regulation.
13.4. As from the official date of entry into force of the 07 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 07 series of amendments.
13.5. As from 24 months after the date of entry into force of the 07 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to approval only if the vehicle type which meets to be approved complies with the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 07 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
13.6. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even 48 months after the date of entry into force of the 03 07 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type existing approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type cease to be approved meets valid, except in the case of vehicle types which comply with the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 07 series of amendments.
13.7. Furthermore, as As from the official date of entry into force of the 03 08 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 08 series of amendments.
13.8. As from 24 months after the date of entry into force of the 08 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets only if the requirements of phase 3 of this Regulation Regulation, as amended by the 03 08 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulationare satisfied.
13.9. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even 36 months after the date of entry into force of the 03 08 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type refuse to recognize approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or which were not granted in accordance with the preceding 08 series of amendments to this Regulation.
13.10. Transitional Provisions for Phase 3 (see paragraph 6.2.2Notwithstanding paragraphs 13.8. above) and 13.9., approvals of the vehicle categories which are not affected by the 08 series of amendments shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
13.11. As from 1 July 2024 for vehicle types other than N2, N3 and M3 and long as from 1 July 2026 for vehicles types there are no requirements forbidding side-facing seats in their national requirements at the time of category N2, N3 and M3acceding to this Regulation, Contracting Parties applying may continue to allow the fitting of side-facing seats for the purpose of national approval and in this Regulation case these bus categories cannot be type approved under this Regulation
13.12. The exemption referred to in paragraph 5.1.3. shall grant type-approvals only cease to have effect on 20 October 2010. It may be extended if the vehicle type to be approved meets the requirements reliable accident statistics are available and there has been further development of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboverestraint systems.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant type approvals under this Regulation as amended by the 02 series of amendments.
12.2. As from 24 months after the date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant type approval only if the vehicle type to be approved complies with the requirements of this Regulation as amended by the 02 series of amendments.
12.3. As from 36 months after the date of entry into force of the 02 series of amendments, existing approvals to this Regulation shall cease to be valid, except in the case of vehicle types which comply with the requirements of this Regulation as amended by the 02 series of amendments.
12.4. As from the official date of entry into force of the 03 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
12.5. As from 24 months after the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which to be approved meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
12.6. Contracting Parties applying this Regulation shall not refuse to grant extensions Until 48 months after the date of type approvals for existing types which have been granted according to entry into force the 02 03 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
12.7. Even Starting 48 months after the date of entry into force of to the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse first national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 registration (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of first entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. aboveservice) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or which does not meet the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force requirements of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.Annex 1
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 02 series of amendments.
12.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, November 2012 Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type requirements of this Regulation, as amended by the 02 series of amendments, are satisfied.
12.3. As from 1 November 2014, approvals granted in conformity to this Regulation shall cease to be approved meets valid, except those granted in conformity with the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments.
12.4. As from 1 November 2014, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle which has not been type approved in conformity with the requirements of the 02 series of amendments to this Regulation.
12.5. Even after the date of entry into force of the 02 series of amendments, approvals of the components to the 01 series of amendments to this Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them and shall not refuse to grant extensions of approval to the 01 series of amendments to this Regulation.
12.6. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments.
12.7. As from 24 months after the date of entry into force of the 03 series of amendments Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing new vehicle types which have been granted according to only if the 02 requirements of this Regulation, as amended by the 03 series of amendments to this Regulationamendments, are satisfied.
12.8. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even Starting 60 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse national or regional purposes granting type approvals approval and extensions may refuse first national or regional registration (first entry into service) of type approvals to a vehicle which does not meet the preceding requirements of the 03 series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.9. Even after the date of entry into force of the 03 series of amendments, approvals of components to the 01 or 02 series of amendments to this Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them and shall not refuse to grant extensions of approval to the 01 or 02 series of amendments to this Regulation.
12.10. As from the official date of entry into force of the 04 series of amendments, no Contracting Party applying this UN Regulation shall refuse to grant or refuse to accept UN type-approvals under this UN Regulation as amended by the 04 series of amendments.
12.11. As from 1 September 2021, Contracting Parties applying this UN Regulation may continue for national or regional purposes granting type approvals and extensions of type shall not be obliged to accept UN type-approvals to phase the preceding series of amendments, first issued after 1 (see paragraph 6.2.2September 2021.
12.12. above) or Until 1 September 2022, Contracting Parties applying this UN Regulation shall accept UN type-approvals to the preceding series of amendments, first issued before 1 September 2021.
12.13. As from 1 September 2022, Contracting Parties applying this UN Regulation shall not be obliged to accept type-approvals issued to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
12.14. Contracting Parties applying this UN Regulation shall not refuse to grant extensions of type UN type-approvals for existing types which have been granted according to phase 2 according any preceding series of amendments to paragraph 6.2.2. abovethis UN Regulation or extensions thereof.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 02 series of amendments.
12.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, November 2012 Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type requirements of this Regulation, as amended by the 02 series of amendments, are satisfied.
12.3. As from 1 November 2014, approvals granted in conformity to this Regulation shall cease to be approved meets valid, except those granted in conformity with the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments.
12.4. As from 1 November 2014, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle which has not been type approved in conformity with the requirements of the 02 series of amendments to this Regulation.
12.5. As from 1 November 2014 or as from the date of adoption of uniform test provisions for side-facing seats (i.e. this Regulation) as well as provisions for such seats regarding safety-belt anchorages (i.e. Regulation No. 14) and vehicles equipped with safety-belts (i.e. Regulation No. 16), whichever date is earlier, approvals granted under paragraph 1.5. of this Regulation shall cease to be valid.
12.6. Even after the date of entry into force of the 02 series of amendments, approvals of the components to the 01 series of amendments to this Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them and shall not refuse to grant extensions of approval to the 01 series of amendments to this Regulation.
12.7. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments.
12.8. As from 24 months after the date of entry into force of the 03 series of amendments Contracting Parties applying this Regulation shall not refuse to grant extensions approvals only if the requirements of type approvals for existing types which have been granted according to this Regulation, as amended by the 02 03 series of amendments to this Regulationamendments, are satisfied.
12.9. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even Starting 60 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse national or regional purposes granting type approvals approval and extensions may refuse first national or regional registration (first entry into service) of type approvals to a vehicle which does not meet the preceding requirements of the 03 series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.10. Even after the date of entry into force of the 03 series of amendments amendments, approvals of components to this Regulation, Contracting Parties applying this Regulation may continue for national the 01 or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding 02 series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 Regulation shall remain valid and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type continue to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation accept them and shall not refuse to grant extensions of type approvals for existing types which have been granted according approval to phase 2 according the 01 or 02 series of amendments to paragraph 6.2.2. abovethis Regulation.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 21.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals an application for approval under this Regulation as amended by the 03 02 series of amendments.
21.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201626 January 2006, Contracting Parties applying this Regulation shall grant type-approvals to a type of vehicle with regard to the installation of devices for indirect vision only if the type of vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments. However, this date shall be postponed by 12 months as regards the requirements concerning the installation of a Class VI front mirror.
21.3. As from the official date of entry into force of the 03 series of amendments26 January 2006, Contracting Parties applying this Regulation shall grant type approvals to a type of devices for indirect vision only if the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 02 series of amendments. However, this date shall be postponed by 12 months with regard to the requirements concerning a Class VI front mirror as a component and its installation on vehicles.
21.4. As from 26 January 2010 for vehicles of category M1 and N1 and 26 January 2007 for vehicles of other categories, Contracting Parties applying this Regulation shall not may refuse to grant extensions recognize approvals of a type approvals for existing types of vehicle which have not been granted according to in accordance with the 02 series of amendments to this Regulation.
21.5. Until 30 June 2022As from 26 January 2010 for vehicles of category M1 and N1 and from 26 January 2007 for vehicles of other categories, no Contracting Party Parties applying this Regulation shall may refuse national or regional type approval to recognize approvals of a vehicle type-approved to device for indirect vision which have not been granted in accordance with the 02 series of amendments to this Regulation.
21.6. As from 1 July 2022, Contracting Parties applying Approvals which were granted to rear-view mirrors of Classes I or III pursuant to this Regulation shall not be obliged to accept for in its original form (00 series) or modified by the purpose of national or regional type approval, a vehicle type approved to the preceding 01 series of amendments to this Regulation. Even after before the date of entry into force of this series of amendments shall remain valid.
21.7. The provisions of this Regulation shall not prohibit the 03 approval of a type of vehicle with regard to the mounting of rear-view mirrors pursuant to this Regulation as modified by the 02 series of amendments, if all or part of the rear-view mirrors of Classes I or III, with which it is fitted, bear the approval mark prescribed by the original version (00 or 01series) of this Regulation.
21.8. Notwithstanding the provisions of paragraphs 21.3. and 21.5. above, for the purpose of replacement parts Contracting Parties applying this Regulation shall continue to grant approvals according to the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue to devices for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions indirect vision for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for use on vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approved before the date mentioned in paragraph 21.2. pursuant to phase 1 (see paragraph 6.2.2. above) or the 02 01 series of amendments of Regulation No. 46, and, where applicable, subsequent extensions to this Regulationthese approvals. Until 30 June 2022 for vehicle types other than N2 Annex 1 FOR TYPE-APPROVAL OF A DEVICE FOR INDIRECT VISION The following information, if applicable, shall be supplied in triplicate and until 30 June 2023 for vehicles types must include a list of category N2contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 paper or on a folder of A4 format. Photographs, no Contracting Party applying this Regulation if any, shall refuse national or regional type approval show sufficient detail.
1. Make (trade name of a vehicle type-approved to phase 1 (see paragraph 6.2.2manufacturer): ...........................................................................
2. above) or the 02 series Type and general commercial description(s): ..............................................................
3. Means of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force identification of the 03 series type, if indicated on the device: ....................................
4. Category of amendments to this Regulation, Contracting Parties applying this Regulation may continue vehicle for national or regional purposes granting type approvals which the device is intended:..................................................
5. Name and extensions address of type approvals to phase 1 (see paragraph 6.2.2manufacturer: ............................................................................
6. above) or Location and method of affixing of the preceding series of amendments to this Regulationapproval mark: ..............................................
7. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. aboveAddress(es) of this Regulation as amended by the 03 series of amendmentsassembly plant(s): ...............................................................................
8. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals Mirrors (state for existing types which have been granted according to phase 2 according to paragraph 6.2.2each mirror):.................................................................................... 8.1. above.Variant .......................................................................................................................
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 11.1. As from the official date of entry into force of the 03 07 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 07 series of amendments.
11.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201624 months after the date of entry into force of the 07 series of amendments, Contracting Parties applying this Regulation shall grant type-type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 07 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
11.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to any preceding series of amendments to this Regulation or extensions thereof.
11.4. Until 24 months after the 02 date of entry into force of the 07 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 preceding series of amendments to this Regulation.
11.5. As from 1 July 202224 months after the date of entry into force of the 07 series of amendments to this Regulation, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
11.6. Even Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept UN type approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation.
11.7. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from the official date of entry into force of Supplement 1 July 2020 for vehicle types other than N2 and as to the 07 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval according to Supplement 1 to 07 series of amendments to the UN Regulation.
11.8. As from 60 months after the date of entry into force of Supplement 1 July 2022 for vehicles types to the 07 series of category N2amendments to this Regulation, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by Supplement 1 to the 03 07 series of amendmentsamendments to this Regulation.
11.9. Furthermore, as As from the official date of entry into force of the 03 08 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national to grant or regional refuse to accept type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or approvals under this Regulation as amended by the 02 08 series of amendments to this Regulationamendments.
11.10. As from 1 July 2022 for vehicle types other than N2 and as September 2021, Contracting Parties applying this UN Regulation shall not be obliged to accept UN type approvals to the preceding series of amendments, first issued after that date.
11.11. Until 1 September 2024, Contracting Parties applying this Regulation shall accept UN type approvals to the preceding series of amendments, first issued before (date in paragraph 11.10 above).
11.12. As from 1 July 2023 for vehicles types of category N2September 2024, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional UN type approval, a vehicle type approved approvals issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
11.13. Even after the date of entry into force of the 03 series of amendments to this RegulationNotwithstanding paragraph 11.12., Contracting Parties applying this Regulation may shall continue for national or regional purposes granting to accept UN type approvals and extensions of type approvals issued according to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions , for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for the vehicles/vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended systems which are not affected by the 03 changes introduced by the 08 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 1 contract
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments12.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant or refuse to accept type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments.
12.2. Contracting Parties applying this Regulation shall not refuse continue to accept type approvals of and to grant extensions of type approvals for existing types to, the classes C2 and C3 tyres, which have been granted according are not affected by the changes of the technical requirements concerning the adhesion on wet surfaces of class C1 tyres in worn state introduced by the 03 series of amendments, to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.3. As from 1 7 July 20222024, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose type approvals of national or regional type approval, a vehicle type approved class C1 tyres to the preceding 02 series of amendments to this Regulationamendments, first issued after 7 July 2024.
12.4. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 Until 7 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N22026, Contracting Parties applying this Regulation shall grant accept type approvals only if of class C1 tyres to the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 02 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulationfirst issued before 7 July 2024.
12.5. As from 1 7 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N22026, Contracting Parties applying this Regulation shall not be obliged to accept for type approvals of class C1 tyres issued to the purpose 02 series of national or regional amendments to this Regulation.
12.6. Contracting Parties applying this Regulation may grant type approval, a vehicle type approved approvals according to phase 1 (see paragraph 6.2.2.1. above) or the any preceding series of amendments to this Regulation.
12.6.1. Even after the date Contracting Parties applying this Regulation shall continue to grant extensions of entry into force existing approvals to any preceding series of amendments to this Regulation.
12.7. Until 1 September 2024, Contracting Parties applying this Regulation may continue to grant type approvals according to the 03 series of amendments to this Regulation, based on snow performance test described in Annex 7 to this Regulation using SRTT14 as reference tyre. 14
12.8. Until 1 September 2024, Contracting Parties applying this Regulation may continue for national or regional purposes granting to grant type approvals and extensions of type approvals according to phase 1 (see paragraph 6.2.2. above) or the preceding 03 series of amendments to this Regulation. Transitional Provisions , based on the test procedures for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and measuring the wet adhesion of tyres in new state as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) described in Annex 5 of this Regulation as amended by Regulation, without taking into account the 03 provisions introduced after Supplement 12 to the 02 series of amendments.
(a) SRTT14 will be available from the supplier until end of October 2021. Contracting Parties applying this Regulation shall not refuse to grant extensions 14 SRTT14 will be available from the supplier until end of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2October 2021. above.Annex 1
Appears in 1 contract
Transitional Provisions. 21.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals an application for approval under this Regulation as amended by the 03 02 series of amendments.
21.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201626 January 2006, Contracting Parties applying this Regulation shall grant type-approvals to a type of vehicle with regard to the installation of devices for indirect vision only if the type of vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments. However, this date shall be postponed by 12 months as regards the requirements concerning the installation of a Class VI front mirror.
21.3. As from the official date of entry into force of the 03 series of amendments26 January 2006, Contracting Parties applying this Regulation shall grant type approvals to a type of devices for indirect vision only if the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 02 series of amendments. However, this date shall be postponed by 12 months with regard to the requirements concerning a Class VI front mirror as a component and its installation on vehicles.
21.4. As from 26 January 2010 for vehicles of category M1 and N1 and 26 January 2007 for vehicles of other categories, Contracting Parties applying this Regulation shall not may refuse to grant extensions recognize approvals of a type approvals for existing types of vehicle which have not been granted according to in accordance with the 02 series of amendments to this Regulation.
21.5. Until 30 June 2022As from 26 January 2010 for vehicles of category M1 and N1 and from 26 January 2007 for vehicles of other categories, no Contracting Party Parties applying this Regulation shall may refuse national or regional type approval to recognize approvals of a vehicle type-approved to device for indirect vision which have not been granted in accordance with the 02 series of amendments to this Regulation.
21.6. As from 1 July 2022, Contracting Parties applying Approvals which were granted to rear-view mirrors of Classes I or III pursuant to this Regulation shall not be obliged to accept for in its original form (00 series) or modified by the purpose of national or regional type approval, a vehicle type approved to the preceding 01 series of amendments to this Regulation. Even after before the date of entry into force of this series of amendments shall remain valid.
21.7. The provisions of this Regulation shall not prohibit the 03 approval of a type of vehicle with regard to the mounting of rear-view mirrors pursuant to this Regulation as modified by the 02 series of amendments, if all or part of the rear-view mirrors of Classes I or III, with which it is fitted, bear the approval mark prescribed by the original version (00 or 01series) of this Regulation.
21.8. Notwithstanding the provisions of paragraphs 21.3. and 21.5. above, for the purpose of replacement parts Contracting Parties applying this Regulation shall continue to grant approvals according to the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue to devices for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions indirect vision for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for use on vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approved before the date mentioned in paragraph 21.2. pursuant to phase 1 (see paragraph 6.2.2. above) or the 02 01 series of amendments of Regulation No. 46, and, where applicable, subsequent extensions to this Regulationthese approvals. Until 30 June 2022 for vehicle types other than N2 Annex 1 FOR TYPE-APPROVAL OF A DEVICE FOR INDIRECT VISION The following information, if applicable, shall be supplied in triplicate and until 30 June 2023 for vehicles types must include a list of category N2contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 paper or on a folder of A4 format. Photographs, no Contracting Party applying this Regulation if any, shall refuse national or regional type approval show sufficient detail.
1. Make (trade name of a vehicle type-approved to phase 1 (see paragraph 6.2.2manufacturer): ..............................................................................
2. above) or the 02 series Type and general commercial description(s): .................................................................
3. Means of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force identification of the 03 series type, if indicated on the device: ......................................
4. Category of amendments to this Regulation, Contracting Parties applying this Regulation may continue vehicle for national or regional purposes granting type approvals which the device is intended: ....................................................
5. Name and extensions address of type approvals to phase 1 (see paragraph 6.2.2manufacturer: ...............................................................................
6. above) or Location and method of affixing of the preceding series of amendments to this Regulationapproval mark: .................................................
7. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. aboveAddress(es) of this Regulation as amended by the 03 series of amendmentsassembly plant(s): ...................................................................................
8. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals Mirrors (state for existing types which have been granted according to phase 2 according to paragraph 6.2.2each mirror):........................................................................................ 8.1. above.Variant ............................................................................................................................
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments17.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 03 series of amendments.
17.2. As from 12 months after the date of entry into force, Contracting Parties applying this Regulation shall grant ECE approvals only if the child restraint system type approvals to the vehicle type which be approved meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
17.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types During the 12-month period which have been granted according to follows the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall can continue to grant type approvals to the vehicle type those child restraint systems which meets comply with the requirements of phase 3 of this Regulation as amended by the 03 02 series of amendments.
17.4. In the same period of 12 months, Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approval to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
17.5. Even after As from the date of entry into force of the 03 series of amendments amendments, the provisions of Annex 16 to this RegulationRegulation shall apply also to child restraint devices already type approved to the 02 series of amendments.
17.6. Starting from the date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting refuse the sale of a type approvals and extensions of type approvals to phase 1 (see child restraint which does not meet the requirements of paragraph 6.2.2. above) or and 6.2.14. of the preceding 03 series of amendments.
17.7. Starting 36 months after the entry into force of the 03 series of amendments, Contracting Parties applying this Regulation may refuse the sale of child restraint systems which do not meet the requirements of the 03 series of amendments to this Regulation.
17.8. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2the date of entry into force of supplement 2 to the 03 series of amendments, N3 and M3 and the label required by paragraph 4.5. of this Regulation shall be affixed to all new child restraints manufactured in conformity with this Regulation.
17.9. As from the official date of entry into force of the 04 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 04 series of amendments.
17.10. As from 1 July 2026 for vehicles types 12-months after the date of category N2, N3 and M3entry into force of the 04 series of amendments, Contracting Parties applying this Regulation shall grant type-ECE approvals only if the vehicle child restraint system type to be approved meets the requirements of phase 3 (see paragraph 6.2.2this Regulation as amended by the 04 series of amendments.
17.11. above) During the 12-month period which follows the date of entry into force of the 04 series of amendments, Contracting Parties applying this Regulation can continue to grant type approvals to those child restraint systems which comply with the requirements of this Regulation as amended by the 03 series of amendments.
17.12. During the 36-month period which follows the date of entry into force of the 04 series of amendments, Contracting Parties applying this Regulation shall not refuse to grant extensions of type approval to the preceding series of amendments to this Regulation.
17.13. Starting 48-months after the entry into force of the 04 series of amendments, Contracting Parties applying this Regulation may refuse the sale of child restraint systems which do not meet the requirements of the 04 series of amendments to this Regulation.
17.14. As from six months from the date of entry into force of Supplement 04 to the 04 series of Amendments approvals granted in accordance with the 03 or 04 series of amendments for existing types child restraint systems belonging to groups 0, 0+ and I which have been granted according do not comply with paragraph 6.1.11. or 6.1.12. shall cease to phase 2 according be valid.
17.15. From the date of entry into force of Supplement 4 to the 04 series of Amendments of this Regulation, by way of derogation to the obligations of Contracting Parties during the transitional period set out in paragraph 6.2.217.14. aboveand based on the declaration made by the European Community at the time of its accession to the 1958 Agreement (Depositary Notification C.N.60.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 11.1. As from the official date of entry into force of the 03 07 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 07 series of amendments.
11.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201624 months after the date of entry into force of the 07 series of amendments, Contracting Parties applying this Regulation shall grant type-type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 07 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
11.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 preceding series of amendments to this Regulation.
11.4. Until 30 June 202224 months after the date of entry into force of the 07 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-type- approved to the 02 preceding series of amendments to this Regulation.
11.5. As from 1 July 202224 months after the date of entry into force of the 07 series of amendments to this Regulation, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
11.6. Even Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals are only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for type approval granted in accordance with the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding 07 series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments11.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 01 series of amendments.
11.2. As from the date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation shall may refuse to grant type ECE approvals to engines, or engine families, of the vehicle type power band E which meets do not meet the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 01 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
11.3. As from 1 July 2022January 2002, Contracting Parties applying this Regulation shall may refuse to grant ECE approvals to engines, or engine families, of the power band F which do not be obliged to accept for meet the purpose requirements of national or regional type approval, a vehicle type approved to this Regulation as amended by the preceding 01 series of amendments amendments.
11.4. As from 1 January 2003, Contracting Parties applying this Regulation may refuse to grant ECE approvals to engines, or engine families, of the power band G which do not meet the requirements of this RegulationRegulation as amended by the 01 series of amendments.
11.5. Even after As from the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 01 series of amendments, Contracting Parties applying this Regulation shall may refuse to grant type ECE approvals to engines, or engine families, of the vehicle type power band D which meets do not meet the requirements of phase 3 of this Regulation as amended by the 03 01 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation.
11.6. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2January 2002, Contracting Parties applying this Regulation shall may refuse the placing on the market of engines included in the power band E not be obliged to accept for approved under this Regulation as amended by the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding 01 series of amendments amendments, unless they are intended to be fitted in category T vehicles. In this Regulationlatter case the placing on the market of engines, or engine families, intended for fitting in category T vehicles may be allowed up to 1 July 2002.
11.7. Even after As from 1 January 2003, Contracting Parties applying this Regulation may refuse the placing on the market of engines included in the power band F not approved under this Regulation as amended by the 01 series of amendments, unless they are intended to be fitted in category T vehicles. In this latter case the placing on the market of engines, or engine families, intended for fitting in category T vehicles may be allowed up to 1 July 2003.
11.8. As from 1 January 2004, Contracting Parties applying this Regulation may refuse the placing on the market of engines included in the power band G not approved under this Regulation as amended by the 01 series of amendments, unless they are intended to be fitted in category T vehicles. In this latter case the placing on the market of engines, or engine families, intended for fitting 1n category T vehicles may be allowed up to the same date.
11.9. As from the date of entry into force of the 03 01 series of amendments amendments, Contracting Parties applying this Regulation may refuse the placing on the market of engines included in the power band D not approved under this Regulation as amended by the 01 series of amendments, unless they are intended to be fitted in category T vehicles. In this Regulationlatter case the placing on the market of engines, or engine families, intended for fitting in category T vehicles may be allowed up to 1 January 2002.
11.10. By derogation to the provisions stipulated in paragraphs 11.6., 11.7., 11.8. and 11.9., Contracting Parties applying this Regulation may postpone each date mentioned in the above paragraphs for two years in respect of engines with a production date prior to the said dates.
11.11. By derogation to the provisions stipulated in paragraphs 11.6., 11.7., 11.8. and 11.9., Contracting Parties applying this Regulation may continue to permit the placing on the market of engines approved on the basis of a previous technical standard, provided that the engines are intended as replacement for national or regional purposes granting type approvals fitting in vehicles in use, and extensions of type approvals that it is not technically feasible for the engines in question to phase 1 (see paragraph 6.2.2. above) or satisfy the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the new requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 01 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments13.1. As from the official date of entry into force of the 03 06 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 06 series of amendments.
13.2. As from 1 October 1999, Contracting Parties applying this Regulation shall grant approvals only if the requirements of this Regulation, as amended by the 06 series of amendments, are satisfied.
13.3. As from 1 October 2001, Contracting Parties applying this Regulation may refuse to recognize approvals which were not granted in accordance with the 06 series of amendments to this Regulation.
13.4. As from the official date of entry into force of the 07 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 07 series of amendments.
13.5. As from 24 months after the date of entry into force of the 07 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to approval only if the vehicle type which meets to be approved complies with the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 07 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
13.6. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even 48 months after the date of entry into force of the 03 07 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type existing approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type cease to be approved meets valid, except in the case of vehicle types which comply with the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 07 series of amendments.
13.7. Furthermore, as As from the official date of entry into force of the 03 08 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 08 series of amendments.
13.8. As from 24 months after the date of entry into force of the 08 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets only if the requirements of phase 3 of this Regulation Regulation, as amended by the 03 08 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulationare satisfied.
13.9. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even 36 months after the date of entry into force of the 03 08 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type refuse to recognize approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or which were not granted in accordance with the preceding 08 series of amendments to this Regulation.
13.10. Transitional Provisions for Phase 3 (see paragraph 6.2.2Notwithstanding paragraphs 13.8. above) and 13.9., approvals of the vehicle categories which are not affected by the 08 series of amendments shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
13.11. As from 1 July 2024 for vehicle types other than N2, N3 and M3 and long as from 1 July 2026 for vehicles types there are no requirements forbidding side-facing seats in their national requirements at the time of category N2, N3 and M3acceding to this Regulation, Contracting Parties applying may continue to allow the fitting of side-facing seats for the purpose of national approval and in this case these bus categories cannot be type approved under this Regulation shall grant type-approvals only if the (Maximum format: A4 (210 x 297 mm)) Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a vehicle type with regard to be approved meets the requirements strength of phase 3 (see paragraph 6.2.2the seats and their anchorages, in the case either of seats fitted or capable of being fitted with head restraints or of seats not capable of being fitted with such devices and the characteristics of head restraints pursuant to Regulation No. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.17
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 10.1 As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 02 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) .
10.2 As from 1 July 201624 months after the date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant type-type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. .
10.3 Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the preceding series of amendments to this Regulation.
10.4 Until 24 months after the date of entry into force of the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-type- approved to the preceding series of amendments to this Regulation.
10.5 As from 24 months after the date of entry into force of the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even .
10.6 Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant are only obliged to accept type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been approval granted according to phase 1 (see paragraph 6.2.2. above) or in accordance with the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 01 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
12.2. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 6 July 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval for vehicle types of a category M1 and as from 6 July 2024 for vehicle type-approved to the 02 series types of amendments to this Regulation. As from 1 July 2022other categories than M1, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulationamendments, first issued after 6 July 2022.
12.3. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 Until 6 July 2020 2022, for vehicle types other than N2 of category M1 and as from 1 until 6 July 2022 2024 for vehicles vehicle types of category N2other categories than M1, Contracting Parties applying this Regulation shall grant accept type approvals only if to the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 preceding series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendmentsfirst issued before 6 July 2022.
12.4. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 As from 6 July 2022, for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As M1 and as from 1 6 July 2022 2024 for vehicle types of other categories than N2 and as from 1 July 2023 for vehicles types of category N2M1, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved approvals issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.5. Even Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation/are only obliged to accept type approval granted in accordance with the 01 series of amendments.
12.6. Transitional Provisions for Phase 3 (see Notwithstanding paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M312.4., Contracting Parties applying this Regulation shall grant type-continue to accept type approvals only if issued according to the preceding series of amendments to this Regulation, for the vehicles/vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended systems which are not affected by the 03 changes introduced by the 01 series of amendments.
12.7. Contracting Parties applying this Regulation may grant type approvals according to any preceding series of amendments to this Regulation.3
12.8. Contracting Parties applying this Regulation shall not refuse continue to grant extensions of type existing approvals for existing types which have been granted according to phase 2 according any preceding series of amendments to paragraph 6.2.2this Regulation.3 3 Note by the secretariat: the wording was adjusted in line with the decision of WP.29 at its November 2020 session (ECE/TRANS/WP.29/1155, paras. above92 and 93, and informal document WP.29-182-11).
Appears in 1 contract
Transitional Provisions. 10.1. As from the official date of entry into force of supplement 1 to the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by Supplement 1 to the 02 series of amendments.
10.2. As from 12 months after the entry into force of the 02 series of amendments Contracting Parties applying this Regulation shall grant approvals only to those types of vehicles which comply with the requirements of this Regulation as amended by the 02 series of amendments.
10.3. As from 60 months after the entry into service of the 02 series of amendments Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of vehicles which do not meet the requirements of this Regulation as amended by the 02 series of amendments.
10.4. As from 36 months after the entry into force of Supplement 1 to the 02 series of amendments Contracting Parties applying this Regulation shall grant approvals only to those types of vehicles which comply with the requirements of this Regulation. as amended by Supplement 1 to the 02 series of amendments.
10.5. As from 84 months after the entry into force of Supplement 1 to the 02 series of amendments Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of vehicles which do not meet the requirements of this regulation as amended by Supplement 1 to the 02 series of amendments.
10.6. As from the official date of entry into force of the 03 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
10.7. As from 24 months after the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals only to the vehicle type those types of vehicles which meets comply with the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. However, in the case of vehicles having an electrical power train operating on high voltage, an additional period of 12 months is granted provided that the manufacturer demonstrates, to the satisfaction of the Technical Service, that the vehicle provides equivalent levels of safety to those required by this Regulation as amended by the 03 series of amendments.
10.8. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved issued to the preceding series of amendments to this Regulation, when this extension does not entail any change to the propulsion system of the vehicle. Even However, as from 48 months after the official date of entry into force of the 03 series of amendments, extensions to approvals issued to the previous series of amendments shall not be granted after this date in respect of vehicles having an electrical power train operating on high voltage.
10.9. Where at the time of entry into force of the 03 series of amendments to this Regulation national requirements exist to address the safety provisions of vehicles having an electrical power train operating on high voltage, those Contracting Parties applying this Regulation may refuse national approval of such vehicles not meeting the national requirements, unless these vehicles are approved to the 03 series of amendments to this Regulation.
10.10. As from 48 months after the entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse national or regional purposes granting type approvals approval and extensions may refuse first national or regional registration (first entry into service) of type approvals to a vehicle having an electrical power train operating on high voltage which does not meet the preceding requirements of the 03 series of amendments to this Regulation.
10.11. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force Approvals of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals vehicles to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or which are not affected by the 02 03 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 shall remain valid and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this the Regulation shall not be obliged continue to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1them.
10.12. above) or the preceding series of amendments to this Regulation. Even Until 18 months after the date of entry into force of the Supplement 3 to the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may can continue for national or regional purposes granting type approvals and extensions of to grant type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding 03 series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types Regulation without taking into account the provisions of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveSupplement 3.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments13.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 03 series of amendments.
13.2. As from 12 months after the date of entry into force of this Regulation, as amended by the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which type, component or separate technical unit to be approved meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
13.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
13.4. Even Starting 48 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for refuse first national registration (first entry into service) of a vehicle, component or regional purposes granting type approvals and extensions separate technical unit which does not meet the requirements of type approvals to the preceding 03 series of amendments to this Regulation.
13.5. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 04 series of amendments, no Contracting Party applying this Regulation shall refuse to grant type approvals under this Regulation as amended by the 04 series of amendments.
13.6. As from 36 months after the official date of entry into force of this Regulation, as amended by the 04 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which type, component or separate technical unit, to be approved meets the requirements of phase 3 of this Regulation as amended by the 03 04 series of amendments.
13.7. Contracting Parties applying this Regulation shall not refuse continue to grant extensions approvals to those types of vehicles or component or separate technical unit type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or comply with the 02 requirements of this Regulation as amended by the preceding series of amendments to this Regulationduring the 36 months period which follows the date of entry into force of the 04 series of amendments.
13.8. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types 60 months after the date of category N2entry into force of the 04 series of amendments, no Contracting Party applying this Regulation Parties shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) vehicle, component or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle separate technical unit type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
13.9. Even As from 60 months after the date of entry into force of the 03 04 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for refuse national or regional purposes granting type approvals approval and extensions may refuse first registration of type approvals a vehicle type, or first entry into service of component or separate technical unit which does not meet the requirements of the 04 series of amendments to phase 1 (see paragraph 6.2.2this Regulation.
13.10. Notwithstanding paragraphs 13.8. and 13.9. above) or , approvals granted to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 the Regulation for vehicle types other than N2type which are not equipped with a coupling system to charge the REESS, N3 or for component or separate technical unit which doesn’t include a coupling part to charge the REESS, shall remain valid and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type continue to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveaccept them.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. Transitional Provisions applicable to the 02 series of amendments:
12.1.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-UN type approvals under this Regulation as amended by the 03 02 series of amendmentsamendments unless otherwise specified below.
12.1.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016April 2018, Contracting Parties applying this Regulation shall grant type-not be obliged to accept UN type approvals only if to any preceding series of amendments, first issued after 1 April 2018.
12.1.3. Until 1 April 2021, Contracting Parties applying this Regulation shall continue to accept UN type approvals to the vehicle type to be approved meets the requirements of phase 1 preceding series (see paragraph 6.2.2. above01) of amendments to this Regulation, first issued before 1 April 2018.
12.1.4. As from 1 April 2021, Contracting Parties applying this Regulation as amended shall not be obliged to accept UN type approvals issued to the preceding series of amendments to this Regulation.
12.1.5. Notwithstanding paragraph 12.1.4., UN type approvals to the preceding series of amendments to this Regulation, which are not affected by the 02 series of amendments shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
12.1.6. Until 1 April 2020, type approvals according to the 02 series of amendment to this Regulation may be granted to new vehicle types not complying with the red colour for the hands-off warning signal, mandated in paragraph 5.6.2.2.5., and having multi information displays installed in the instrument cluster not capable of indicating red waning signals or using standalone tell-tales only.
12.2. Transitional Provisions applicable to the 03 series of amendments:
12.2.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant or refuse to accept UN type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.2.2. As from 1 July 2022September 2019, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of UN type approvals to the preceding series (02) of amendments to this Regulationamendments, first issued after 1 September 2019.
12.2.3. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2September 2021, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type continue to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant accept UN type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 preceding series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above02) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationSeptember 2019.
12.2.4. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2021, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved approval issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.2.5. Even after Notwithstanding paragraph and 12.2.4., Contracting Parties applying this Regulation shall continue to accept UN type approvals issued according to a preceding series of amendments to this Regulation, for vehicles which are not affected by the provisions introduced with the 03 series of amendments.
12.3. Transitional Provisions applicable to the 04 series of amendments:
12.3.1. As from the official date of entry into force of the 03 04 series of amendments amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept UN type approvals under this RegulationRegulation as amended by the 04 series of amendments.
12.3.2. As from 1 September 2023, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of shall not be obliged to accept UN type approvals to phase the preceding series of amendments, first issued after 1 (see paragraph 6.2.2September 2023.
12.3.3. above) or Until 1 September 2025, Contracting Parties applying this Regulation shall continue to accept UN type approvals to the preceding series of amendments to this Regulation, first issued before 1 September 2023.
12.3.4. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3September 2025, Contracting Parties applying this Regulation shall grant type-not be obliged to accept type approvals only if issued to the vehicle type preceding series of amendments to be approved meets the requirements of phase 3 (see this Regulation.
12.3.5. Notwithstanding paragraph 6.2.212.3.2. above) of and 12.3.4., Contracting Parties applying this Regulation as amended shall continue to accept UN type approvals issued according to a preceding series of amendments to this Regulation, for vehicles which are not affected by the 03 provisions of paragraph 5.1.6.3.9. introduced with the 04 series of amendments.
12.4. General transitional provisions:
12.4.1. Contracting Parties applying this Regulation shall not refuse to grant extensions of UN type approvals for existing types which have been granted according to phase 2 according any preceding series of amendments to paragraph 6.2.2this Regulation or extensions thereof. above.( issued by: Name of administration: ...................................... ...................................... ...................................... Maximum format: A4 (210 x 297 mm) Concerning:0 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a vehicle type with regard to steering equipment pursuant to UN Regulation No. 79 Approval No. ..................
1. Trade name or mark of vehicle 2. Vehicle type
Appears in 1 contract
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments12.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 01 series of amendment.
12.2. As from 24 months after the official date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to only if the vehicle type which meets or component type to be approved meet the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 01 series of amendments.
12.3. Starting from 60 months after the official date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation may refuse first national or regional registration (first entry into service) of a vehicle which does not meet the requirements of this Regulation as amended by the 01 series of amendments.
12.4. Even after the date of entry into force of the 01 series of amendments to this Regulation, approvals of the components to the preceding series of amendments to the Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
12.5. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approval to the 02 00 series of amendments to this Regulation.
12.6. Until 30 June 2022As from the official date of entry into force of the 02 series of amendments, no Contracting Party Parties applying this Regulation shall refuse national or regional type to grant approval of a vehicle type-approved to under this Regulation as amended by the 02 series of amendments to this Regulationamendment.
12.7. As from 1 July 202248 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall not grant approvals only if the component type to be obliged approved meet the requirements of this Regulation as amended by the 02 series of amendments.
12.8. As from 60 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to accept for be approved meet the purpose requirements of this Regulation as amended by the 02 series of amendments.
12.9. Starting 96 months after the official date of entry into force of the 02 series of amendments, Contracting Parties applying this Regulation may refuse first national or regional type approval, registration (first entry into service) of a vehicle type approved to which does not meet the preceding requirements of this Regulation as amended by the 02 series of amendments to this Regulationamendments.
12.10. Even after the date of entry into force of the 03 02 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals the components to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 the regulation shall remain valid and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this the Regulation shall grant type approvals only if the continue to accept them. Annex 1 Information document for vehicle type to be approved meets the requirements of phase 2 (see In accordance with paragraph 6.2.23.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals relating to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved with regard to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force burning behaviour of the 03 series components used in the interior compartment, the engine compartment and any separate heating compartment and/or the capability to repel fuel or lubricant of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals insulation materials used in the engine compartment and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveany separate heating compartment.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 21.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals an application for approval under this Regulation as amended by the 03 02 series of amendments.
21.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201626 January 2006, Contracting Parties applying this Regulation shall grant type-approvals to a type of vehicle with regard to the installation of devices for indirect vision only if the type of vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 02 series of amendments. However, this date shall be postponed by 12 months as regards the requirements concerning the installation of a Class VI front mirror.
21.3. As from the official date of entry into force of the 03 series of amendments26 January 2006, Contracting Parties applying this Regulation shall grant type approvals to a type of devices for indirect vision only if the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 02 series of amendments. However, this date shall be postponed by 12 months with regard to the requirements concerning a Class VI front mirror as a component and its installation on vehicles.
21.4. As from 26 January 2010 for vehicles of category M1 and N1 and 26 January 2007 for vehicles of other categories, Contracting Parties applying this Regulation shall not may refuse to grant extensions recognize approvals of a type approvals for existing types of vehicle which have not been granted according to in accordance with the 02 series of amendments to this Regulation.
21.5. Until 30 June 2022As from 26 January 2010 for vehicles of category M1 and N1 and from 26 January 2007 for vehicles of other categories, no Contracting Party Parties applying this Regulation shall may refuse national or regional type approval to recognize approvals of a vehicle type-approved to device for indirect vision which have not been granted in accordance with the 02 series of amendments to this Regulation.
21.6. As from 1 July 2022, Contracting Parties applying Approvals which were granted to rear-view mirrors of Classes I or III pursuant to this Regulation shall not be obliged to accept for in its original form (00 series) or modified by the purpose of national or regional type approval, a vehicle type approved to the preceding 01 series of amendments to this Regulation. Even after before the date of entry into force of this series of amendments shall remain valid.
21.7. The provisions of this Regulation shall not prohibit the 03 approval of a type of vehicle with regard to the mounting of rear-view mirrors pursuant to this Regulation as modified by the 02 series of amendments, if all or part of the rear-view mirrors of Classes I or III, with which it is fitted, bear the approval ▇▇▇▇ prescribed by the original version (00 or 01series) of this Regulation.
21.8. Notwithstanding the provisions of paragraphs 21.3. and 21.5. above, for the purpose of replacement parts Contracting Parties applying this Regulation shall continue to grant approvals according to the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue to devices for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions indirect vision for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for use on vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approved before the date mentioned in paragraph 21.2. pursuant to phase 1 (see paragraph 6.2.2. above) or the 02 01 series of amendments of Regulation No. 46, and, where applicable, subsequent extensions to this Regulationthese approvals. Until 30 June 2022 for vehicle types other than N2 Annex 1 FOR TYPE-APPROVAL OF A DEVICE FOR INDIRECT VISION The following information, if applicable, shall be supplied in triplicate and until 30 June 2023 for vehicles types must include a list of category N2contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 paper or on a folder of A4 format. Photographs, no Contracting Party applying this Regulation if any, shall refuse national or regional type approval show sufficient detail.
1. Make (trade name of a vehicle type-approved to phase 1 (see paragraph 6.2.2manufacturer): ...........................................................................
2. above) or the 02 series Type and general commercial description(s): ..............................................................
3. Means of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force identification of the 03 series type, if indicated on the device: ....................................
4. Category of amendments to this Regulation, Contracting Parties applying this Regulation may continue vehicle for national or regional purposes granting type approvals which the device is intended:..................................................
5. Name and extensions address of type approvals to phase 1 (see paragraph 6.2.2manufacturer: ............................................................................
6. above) or Location and method of affixing of the preceding series of amendments to this Regulationapproval ▇▇▇▇: ..............................................
7. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. aboveAddress(es) of this Regulation as amended by the 03 series of amendmentsassembly plant(s): ...............................................................................
8. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals Mirrors (state for existing types which have been granted according to phase 2 according to paragraph 6.2.2each mirror):.................................................................................... 8.1. above.Variant .......................................................................................................................
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 XX series of amendments to [this Regulationseries of amendments], no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 07 series of amendments.
12.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201624 months after the date of entry into force of the XX series of amendments [this series of amendments], Contracting Parties applying this Regulation shall grant type-type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 XX series of amendments [this series of amendments].
12.3. As from Contracting Parties applying this UN Regulation shall not refuse to grant type approvals according to any preceding series of amendments to this UN Regulation or extensions thereof.
12.4. Until 24 months after the official date of entry into force of the 03 XX series of amendments [this series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022], no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 preceding series of amendments to this Regulation.
12.5. As from 1 July 202224 months after the date of entry into force of the XX series of amendments [this series of amendments], Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
12.6. Even Notwithstanding the transitional provisions above, Contracting Parties who start to apply this UN Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept UN type- approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this UN Regulation.
12.7. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 XX series of amendments to [this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types series of category N2amendments with the current supplement], no Contracting Party applying this UN Regulation shall refuse national to grant or regional refuse to accept type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or approvals under this UN Regulation as amended by the 02 XX series of amendments to [this Regulationseries of amendments with the current supplement].
12.8. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types September following the entry into force of category N2the XX series of amendments + 12 months, Contracting Parties applying this UN Regulation shall not be obliged to accept for UN type-approvals to the purpose preceding series of national or regional type approvalamendments, a vehicle type approved to phase first issued after that date.
12.9. Until 1 September of (see year of date in paragraph 6.2.2.1. 12.8 above) or + 6 months, Contracting Parties applying this UN Regulation shall accept UN type- approvals to the preceding series of amendments, first issued before (date in paragraph 12.8 above).
12.10. As from 1 September of [(year of date in paragraph 12.8 above) + 6 months]), Contracting Parties applying this UN Regulation shall not be obliged to accept UN type-approvals issued to the preceding series of amendments to this Regulation.
12.11. Even after the date of entry into force of the 03 series of amendments to this RegulationNotwithstanding paragraph 12.10, Contracting Parties applying this UN Regulation may shall continue for national or regional purposes granting type to accept UN type-approvals and extensions of type approvals issued according to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this UN Regulation. Transitional Provisions , for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for the vehicles/vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended systems which are not affected by the 03 changes introduced by the XX series of amendments. Contracting Parties applying amendments [this Regulation shall not refuse to grant extensions series of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveamendments with the current supplement].
Appears in 1 contract
Sources: Regulation No. 141
Transitional Provisions. 24.1. As from the official date of entry into force of the 03 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals type approval under this Regulation as amended by the 03 01 series of amendments.
24.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201612 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant type-approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation.
24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments.
24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) Part II of this Regulation as amended by the 03 01 series of amendmentsamendments to this Regulation.
24.5. As from Until 12 months after the official date of entry into force of the 03 01 series of amendmentsamendments to this Regulation, Contracting Parties applying this Regulation shall can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type which meets to the requirements of phase 2 or phase 3 original version of this Regulation as amended by without taking into account the 03 provisions of the 01 series of amendments.
24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been granted issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation.
24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national to grant or regional refuse to accept type approval under this Regulation as amended by the 02 series of a vehicle type-amendments.
24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved to meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation.
24.10. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, September 2018 Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) Part II of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation.
24.11. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no As from 1 September 2019 Contracting Party Parties applying this Regulation shall may refuse national or regional type approval to recognize approvals of a type of vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations
Transitional Provisions. 11.1. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments.
11.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) )
11.2.1. As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
11.2.2. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation.
11.2.3. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
11.2.4. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
11.2.5. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation.
11.3. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) )
11.3.1. As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments.
11.3.2. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation.
11.3.3. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation.
11.3.4. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.paragraph
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 01 series of amendments.
12.2. As from 36 months after the date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation with respect to the temporary-use spare wheels/tyres, run-flat tyres or a run-flat system shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 01 series of amendments.
12.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the preceding series of amendments to this Regulation.
12.4. Contracting Parties applying this Regulation shall continue to grant approvals to those types of vehicles which comply with the requirements of this Regulation as amended by the preceding series during the 36 months' period which follows the date of entry into force of the 01 series of amendments.
12.5. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 02 series of amendments.
12.6. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016November 2012, Contracting Parties applying this Regulation shall may refuse to grant type-approvals only national or regional approval to a vehicle type of categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the vehicle type to be approved meets does not meet the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation.
12.7. Until 30 June 2022As from 1 November 2014, no Contracting Party Parties applying this Regulation shall may refuse first national or regional type approval registration (first entry into service) of a vehicle type-approved in categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the vehicle type does not meet the requirements of the 02 series of amendments to this Regulation.
12.8. As from 1 July 2022Notwithstanding the transitional provisions above, Contracting Parties applying whose application of this Regulation shall comes into force after the date of entry into force of the most recent series of amendments are not be obliged to accept for the purpose approvals which were granted in accordance with any of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.Annex 1
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 01 series of amendments.
12.2. As from 24 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 01 series of amendments.
12.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of approvals for existing types which have been granted according to the original version of this Regulation.
12.4. Even after the entry into force of the 01 series of amendments to this Regulation, type approvals of the vehicles to the original version of this Regulation shall remain valid. Contracting Parties applying this Regulation shall continue to accept them.
12.5. Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 01 series of amendments are not obliged to accept approvals which were granted in accordance with the original version of this Regulation.
12.6. As from the official date of entry into force of the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 02 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
12.7. As from 1 July 2022September 2023, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulationamendments, first issued after 1 September 2023.
12.8. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Until 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, September 2024 Contracting Parties applying this Regulation shall grant accept type approvals only if to the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 preceding series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase first issued before 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this RegulationSeptember 2023.
12.9. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2024, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved approvals issued to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
12.10. Even Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept type approvals and extensions which were granted in accordance with any of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation.
12.11. Transitional Provisions for Phase 3 (see Notwithstanding paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M312.4, Contracting Parties applying this Regulation shall grant type-continue to accept type approvals only if issued according to the preceding series of amendments to this Regulation, for the vehicles/vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended systems which are not affected by the 03 changes introduced by the 02 series of amendments.
12.12. Contracting Parties applying this Regulation may grant type approvals according to any preceding series of amendments to this Regulation.
12.13. Contracting Parties applying this Regulation shall not refuse continue to grant extensions of type existing approvals for existing types which have been granted according to phase 2 according any preceding series of amendments to paragraph 6.2.2. abovethis Regulation.
Appears in 1 contract
Transitional Provisions. 9.1. As from the official date of entry into force of the 03 04 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-UN type approvals under this Regulation as amended by the 03 04 series of amendments.
9.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016September 2018, Contracting Parties applying this Regulation shall grant type-approvals only if the type of vehicle type corresponds to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 04 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
9.3. As from 1 July 2022September 2021, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
9.4. Even Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept UN type approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation.
9.5. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 05 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national to grant or regional type approval of a vehicle refuse to accept UN type-approved to phase 1 (see paragraph 6.2.2. above) or approvals under this Regulation as amended by the 02 05 series of amendments to this Regulationamendments.
9.6. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2023, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved UN type-approvals to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments amendments, first issued after 1 September 2023.
9.7. Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation. Even Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept UN type-approvals and extensions which were granted in accordance with any of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation.
9.8. Transitional Provisions for Phase 3 (see Notwithstanding paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M39.6., Contracting Parties applying this Regulation shall grant continue to accept UN type-approvals only if to the preceding series of amendments to this Regulation, first issued after 1 September 2023 and extension thereof, for the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended types which are not affected by the 03 changes introduced by the 05 series of amendments.
9.9. Contracting Parties applying this Regulation shall not refuse to grant extensions of type UN type- approvals for existing types which have been granted according to phase 2 according any preceding series of amendments to paragraph 6.2.2. abovethis Regulation or extensions thereof.
Appears in 1 contract
Transitional Provisions. 16.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 01 series of amendments.
16.2. As from 1 September 2018, Contracting Parties applying this Regulation shall grant approvals only if the Enhanced Child Restraint System type to be approved meets the requirements of this Regulation as amended by the 01 series of amendments.
16.3. Until 1 September 2018, Contracting Parties applying this Regulation can continue to grant type approvals to Enhanced Child Restraint Systems which comply with the requirements of this Regulation as in its original version.
16.4. Until 1 September 2020, Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the original version of this Regulation.
16.5. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under to this Regulation as amended by the 03 02 series of amendments.
16.6. Transitional Provisions for Phase Until 1 (see paragraph 6.2.2September 2020, type approvals to the preceding series of amendments to the Regulation which are not affected by the 02 series of amendments to the Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
16.7. above) As from Until 1 July 2016September 2022, Contracting Parties applying this Regulation shall not refuse to grant type-approvals only if extensions of approval to the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 01 series of amendmentsamendments to this Regulation.
16.8. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant type or refuse to accept UN type-approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments.
16.9. As from 1 September 2020, Contracting Parties applying this Regulation shall not refuse be obliged to grant extensions of type accept UN type-approvals for existing types which have been granted according to the 02 preceding series of amendments to this Regulation. Until 30 June 2022amendments, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulationfirst issued after 1 September 2020.
16.10. As from 1 July September 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved type-approvals issued to the preceding series of amendments to this Regulation.
16.11. Even after the date of entry into force of the 03 series of amendments to this RegulationNotwithstanding paragraphs 16.9 and 16.10, Contracting Parties applying this the UN Regulation may shall continue for national or regional purposes granting type to accept UN type-approvals and extensions of type approvals issued according to the preceding series of amendments to this the UN Regulation. Transitional Provisions , for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for the vehicles/vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if systems which are not affected by the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended changes introduced by the 03 series of amendments. FurthermoreAnnex 1 Communication (Maximum format: A4 (210 x 297 mm) 1 issued by: Name of administration: Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of restraining devices for child occupants of power-driven vehicles, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this pursuant to UN Regulation shall grant No. 129. Approval No. ...................……………… Extension No. ...........................................
1.1. Forward-facing child restraint/rearward-facing child restraint/lateral-facing child restraint
1.2. Integral/Non integral;2
1.3. Belt type:2 (Adult) three-point belt (Adult) lap belt Special type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendmentsbelt/retractor2
1.4. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.Other features: chair assembly/impact shield2 ..................................................
Appears in 1 contract
Transitional Provisions. 22.1. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals an application for approval under this Regulation as amended by the 03 series of amendments.
22.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201612 months after entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant type-approvals to a type of device for indirect vision only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments.
22.3. As from the official date of 18 months after entry into force of the 03 series of amendmentsamendments to this Regulation, Contracting Parties applying this Regulation shall grant type approvals to a type of vehicle with regard to the installation of devices for indirect vision only if the type of vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
22.4. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even 24 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting refuse to recognize approvals of a type approvals and extensions of type approvals vehicle with regard to the preceding installation of a camera-monitor system for indirect vision or type of camera-monitor system for indirect vision which have not been granted in accordance with the 03 series of amendments to this Regulation.
22.5. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 26 January 2010 for vehicles types of category N2M1 and N1 and from 26 January 2007 for vehicles of other categories, Contracting Parties applying this Regulation may refuse to recognize approvals of a device for indirect vision which have not been granted in accordance with the 02 series of amendments to this Regulation.
22.6. Approvals which were granted to devices for indirect vision of Class I or III pursuant to this Regulation in its original form (00 series) or modified by the 01 or 02 series of amendments before the date of entry into force of the 03 series of amendments shall remain valid and Contracting Parties shall continue to accept them. Contracting Parties shall not refuse to grant type extensions to approvals only if granted to the vehicle type original version, the 01 or 02 series of amendments.
22.7. Notwithstanding the provisions of paragraph 22.2., approvals which were granted to be approved meets mirrors of Classes II, IV, V, VI or VII pursuant to this Regulation as modified by the requirements 02 series of phase 2 (see paragraph 6.2.2amendments before the date of entry into force of the 03 series of amendments shall remain valid and Contracting Parties shall continue to accept them. above) Contracting Parties shall not refuse to grant extensions to approvals granted to the 02 series of amendments.
22.8. The provisions of this Regulation shall not prohibit the approval of a type of vehicle with regard to the mounting of devices for indirect vision pursuant to this Regulation as amended modified by the 03 series of amendments, if all or part of the devices for indirect vision of Class I or III, with which it is fitted, bear the approval ▇▇▇▇ prescribed by this Regulation in its original form (00 series) or modified by the 01 or 02 series of amendments.
22.9. FurthermoreThe provisions of this Regulation shall not prohibit the approval of a type of vehicle with regard to the mounting of devices for indirect vision pursuant to this Regulation as modified by the 03 series of amendments, as if all or part of the rear‑view mirrors of Classes II, IV, V, VI or VII, with which it is fitted, bear the approval ▇▇▇▇ prescribed by the 02 series of amendments of this Regulation.
22.10. Notwithstanding the provisions of paragraphs 22.2., 22.4. and 22.5. above, for the purpose of replacement parts Contracting Parties applying this Regulation shall continue to grant approvals according 02 series of amendments to this Regulation, to devices for indirect vision for use on vehicle types which have been approved before the date mentioned in paragraph 22.2. above pursuant to the 02 series of amendments of Regulation No. 46, and, where applicable, subsequent extensions to these approvals.
22.11. As from the official date of entry into force of the 03 04 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse an application for approval under this Regulation as amended by the 04 series of amendments.
22.12. As from 30 June 2014, Contracting Parties applying this Regulation shall grant type approvals to a type of device for indirect vision only if the vehicle type which of device meets the requirements of phase 3 of this Regulation as amended by the 03 04 series of amendments.
22.13. As from 30 June 2014, Contracting Parties applying this Regulation shall grant approvals to a type of vehicle with regard to the installation of devices for indirect vision only if the type of vehicle meets the requirements of this Regulation as amended by the 04 series of amendments.
22.14. As from 30 June 2015, Contracting Parties applying this Regulation shall not be obliged to accept approvals of a type of vehicle or type of device for indirect vision which have not been granted in accordance with the 04 series of amendments to this Regulation.
22.15. Notwithstanding paragraph 22.14. above, type approvals granted to the preceding series of amendments to the Regulation, which are not affected by the 04 series of amendments, shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
22.16. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of vehicles or devices, which have been are not affected by the 04 series of amendments, granted according to phase 1 (see paragraph 6.2.2. above) or the 02 or 03 series of amendments to this Regulation.
22.17. Until 30 June 2022 for vehicle types other than N2 Notwithstanding the provisions of paragraphs 22.2., 22.4., 22.5., 22.13. and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.222.15. above) or , for the 02 series purpose of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2replacement parts, Contracting Parties applying this Regulation shall not be obliged continue to accept for grant approvals according to the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 01 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue to devices for national or regional purposes granting type approvals and extensions indirect vision of type approvals Classes I to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions V for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for use on vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approved before 26 January 2006 pursuant to phase 2 according the 01 series of amendments of Regulation No. 46 and, where applicable, subsequent extensions to paragraph 6.2.2these approvals. aboveThe following information, if applicable, shall be supplied in triplicate and shall include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 paper or on a folder of A4 format. Photographs, if any, shall show sufficient details.
1. Make (trade name of manufacturer):
2. Type and general commercial description(s):
3. Means of identification of the type, if indicated on the device:
4. Category of vehicle for which the device is intended:
5. Name and address of manufacturer:
6. Location and method of affixing of the approval ▇▇▇▇:
6.1. Other mean of identification link to the approval ▇▇▇▇:
7. Address(es) of assembly plant(s):
8. Mirrors (state for each mirror):
8.1. Variant
8.2. Drawing(s) for the identification of the mirror:
8.3. Details of the method of attachment:
9. Devices for indirect vision other than mirrors:
9.1. Type and characteristics (such as a complete description of the device):
9.1.1. In the case of camera-monitor systems of Classes V and VI, the class, the detection distance [mm], contrast, luminance range, glare correction, display performance (black and white/colour) image repetition frequency, luminance reach of the monitor:
9.1.2. In the case of camera-monitor systems of Classes I to IV, the class, field of view, magnification and resolution:
9.2. Sufficiently detailed drawings to identify the complete device including installation instructions; the position for the type-approval ▇▇▇▇ has to be indicated on the drawings: The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 paper or on a folder of A4 format. Photographs, if any, shall show sufficient details. General
1. Make (trade name of manufacturer):
2. Type and general commercial description(s):
3. Means of identification of type, if marked on the vehicle:
4. Location of that marking:
5. Category of vehicle:
6. Name and address of manufacturer:
7. Address(es) of assembly plant(s): General construction characteristics of the vehicle
8. Photograph(s) and/or drawing(s) of a representative vehicle:
9. Driving cab (forward control or bonneted):0
10. Driving position: left/right1
10.1. The vehicle is equipped to be driven in right-hand/left hand traffic1
11. Range of vehicle dimensions (overall):
11.1 For chassis without bodywork
11.1.1. Width:0
11.1.1.1. Maximum permissible width:
11.1.1.2. Minimum permissible width:
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 11.1. As from the official date of entry into force of the 03 05 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 05 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
11.2. As from 1 July 2022September 2023, Contracting Parties applying this Regulation shall not be obliged to accept for type-approvals of vehicles having an electric power train operating on high voltage according to the purpose preceding series of national amendments, first issued after 1 September 2023.
11.3. Contracting Parties applying this Regulation shall continue to accept type- approvals of vehicles not having an electric power train operating on high voltage according to the 04 series of amendments to this Regulation or regional type approval, a vehicle type approved type- approvals issued according to the preceding series of amendments to this Regulation. Even after , for the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended which are not affected by the 03 changes introduced by the 04 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments.
11.4. Contracting Parties applying this Regulation shall not refuse to grant extensions of type type- approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the any preceding series of amendments to this RegulationRegulation or extensions thereof.
11.5. Even Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept type-approvals and extensions which were granted in accordance with any of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation." "5.11.1. Transitional Provisions Procedures for Phase 3 SOC adjustment.
5.11.1.1. The adjustment of SOC shall be conducted at an ambient temperature of 20 ± 10 °C.
5.11.1.2. The SOC shall be adjusted according to one of the following procedures as applicable. Where different charging procedures are possible, the REESS shall be charged using the procedure which yields the highest SOC:
(see paragraph 6.2.2a) For a vehicle with a REESS designed to be externally charged, the REESS shall be charged to the highest SOC in accordance with the procedure specified by the manufacturer for normal operation until the charging process is normally terminated.
(b) For a vehicle with a REESS designed to be charged only by an energy source on the vehicle, the REESS shall be charged to the highest SOC which is achievable with normal operation of the vehicle. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation The manufacturer shall grant type-approvals only if advise on the vehicle type operation mode to achieve this SOC.
5.11.1.3. When the vehicle is tested, the SOC shall be no less than 95 per cent of the SOC according to paragraphs 5.11.1.1. and 5.11.1.2. for REESS designed to be approved meets externally charged and shall be no less than 90 per cent of SOC according to paragraphs 5.11.1.1. and 5.11.1.2. for REESS designed to be charged only by an energy source on the vehicle. The SOC will be confirmed by a method provided by the manufacturer." Throughout Annex 9 (including Figures), replace the symbols for voltage, V, Vb, V1, V1’, V2, V2’, with U, Ub, U1, U1’, U2, U2’. "This annex describes test procedures to demonstrate compliance to the electrical safety requirements of phase 3 (see paragraph 6.2.25.3.7. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. aboveRegulation."
Appears in 1 contract
Transitional Provisions. 31.1. As from the official date of entry into force of the 03 02 series of amendments to this Regulationamendments, no Contracting Party applying this Regulation shall shall:
(a) refuse to grant or refuse to accept type-approvals approval under Parts I, II and III of this Regulation as amended by the 03 02 series of amendments;
(b) refuse a type of component or separate technical unit approved under Part I of this Regulation as amended by the 02 series of amendments;
(c) prohibit the fitting on a vehicle of a component or separate technical unit approved under Parts I and II of this Regulation as amended by the 02 series of amendments.
31.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016Until 18 months after the date of entry into force of this Regulation as amended by the 02 series of amendments, Contracting Parties applying this Regulation shall shall:
(a) not refuse a type of component or separate technical unit approved under Part I of this Regulation as amended by the 01 series of amendments;
(b) not refuse to grant approvals to those types of component or separate technical unit which comply with the requirements of Part I of this Regulation as amended by the 01 series of amendments;
(c) not refuse to grant extensions of approval for components or separate technical units which comply with Part I of this Regulation as amended by the 01 series of amendments;
(d) continue to allow the fitting on a vehicle of a component or separate technical unit approved under Parts I and II of this Regulation as amended by the 01 series of amendments.
31.3. Starting 18 months after the date of entry into force of this Regulation as amended by the 02 series of amendments, Contracting Parties applying this Regulation shall:
(a) refuse a type of component or separate technical unit which does not meet the requirements of Part I of this Regulation as amended by the 02 series of amendments;
(b) grant approvals only if the type of component or separate technical unit to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments;
(c) prohibit the fitting of a component or separate technical unit which does not meet the requirements of Parts I and II of this Regulation as amended by the 02 series of amendments;
(d) consider approvals in the case of types of component or separate technical unit to be invalid, except where they comply with the requirements of Part I of this Regulation as amended by the 02 series of amendments.
31.4. Until 48 months following the date of entry into force of this Regulation as amended by the 02 series of amendments Contracting Parties applying this Regulation shall:
(a) continue to grant approvals to those types of vehicles which comply with the requirements of Part III of this Regulation as amended by the 01 series of amendments;
(b) continue to accept national or regional type-approval of a vehicle type- approved under Part III of this Regulation as amended by the 01 series of amendments.
31.5. As from 48 months after the date of entry into force of this Regulation as amended by the 02 series of amendments, Contracting Parties applying this Regulation shall:
(a) grant approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) Part III of this Regulation as amended by the 03 02 series of amendments;
(b) refuse national or regional type-approval and shall refuse first national or regional registration (first entry into service) of a vehicle which does not meet the requirements of Part III of this Regulation as amended by the 02 series of amendments;
(c) consider approvals to this Regulation to be invalid, except in the case of vehicle types which comply with the requirements of Part III of this Regulation as amended by the 02 series of amendments.
31.6. As from Notwithstanding the official transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 most recent series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall are not be obliged to accept for the purpose approvals which were granted in accordance with any of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from Annex 1 July 2020 for vehicle types other than N2 and as from Annex 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval concerning: 2/ APPROVAL GRANTED APPROVAL EXTENDED APPROVAL REFUSED APPROVAL WITHDRAWN PRODUCTION DEFINITELY DISCONTINUED of a vehicle type-approved type of rear underrun protective device (RUPD) pursuant to phase 1 (see paragraph 6.2.2Regulation No. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.58
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 XX series of amendments to [this Regulationseries of amendments], no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under this Regulation as amended by the 03 07 series of amendments.
12.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 201624 months after the date of entry into force of the XX series of amendments [this series of amendments], Contracting Parties applying this Regulation shall grant type-type approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 XX series of amendments [this series of amendments].
12.3. As from Contracting Parties applying this UN Regulation shall not refuse to grant type approvals according to any preceding series of amendments to this UN Regulation or extensions thereof.
12.4. Until 24 months after the official date of entry into force of the 03 XX series of amendments [this series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022], no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 preceding series of amendments to this Regulation.
12.5. As from 1 July 202224 months after the date of entry into force of the XX series of amendments [this series of amendments], Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
12.6. Even Notwithstanding the transitional provisions above, Contracting Parties who start to apply this UN Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept UN type-approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this UN Regulation.
12.7. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 XX series of amendments to [this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types series of category N2amendments with the current supplement], no Contracting Party applying this UN Regulation shall refuse national to grant or regional refuse to accept type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or approvals under this UN Regulation as amended by the 02 XX series of amendments to [this Regulationseries of amendments with the current supplement].
12.8. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types September following the entry into force of category N2the XX series of amendments + 12 months, Contracting Parties applying this UN Regulation shall not be obliged to accept for UN type-approvals to the purpose preceding series of national or regional type approvalamendments, a vehicle type approved to phase first issued after that date.
12.9. Until 1 September of (see year of date in paragraph 6.2.2.1. 12.8 above) or + 6 months, Contracting Parties applying this UN Regulation shall accept UN type-approvals to the preceding series of amendments, first issued before (date in paragraph 12.8 above).
12.10. As from 1 September of [(year of date in paragraph 12.8 above) + 6 months]), Contracting Parties applying this UN Regulation shall not be obliged to accept UN type-approvals issued to the preceding series of amendments to this Regulation.
12.11. Even after the date of entry into force of the 03 series of amendments to this RegulationNotwithstanding paragraph 12.10, Contracting Parties applying this UN Regulation may shall continue for national or regional purposes granting type to accept UN type-approvals and extensions of type approvals issued according to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this UN Regulation. Transitional Provisions , for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for the vehicles/vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended systems which are not affected by the 03 changes introduced by the XX series of amendmentsamendments [this series of amendments with the current supplement]. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.Annex 1 Communication
Appears in 1 contract
Transitional Provisions. 14.1. As from the official date of entry into force of the 04 series of amendments (9 December 2010) no Contracting Party applying this Regulation shall refuse to grant type approval under this Regulation as amended by the 04 series of amendments.
14.2. As from the date of entry into force of Supplement 2 to the 04 series of amendments, Contracting Parties applying this Regulation shall refuse to grant approvals for new types of Class B front fog lamps. However, Contracting Parties applying this Regulation, shall continue to issue approvals for Class B front fog lamps on the basis of the 02 and 03 series of amendments provided that these front fog lamps are only intended as replacements for fitting to this Regulationvehicles in use.
14.3. Until 60 months from the date of entry into force of the 04 series of amendments (9 December 2015) with regard to the changes introduced by the 04 series of amendments concerning the photometric testing at reference luminous flux at approximately 13.2 volts, and in order to allow the Technical Services to update their testing equipment, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 04 series of amendments to this Regulation. Until 30 June 2022where existing testing equipment is used, no Contracting Party applying this Regulation shall refuse national or regional type approval with suitable conversion of a vehicle type-approved the values to the 02 series satisfaction of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept the Type Approval Authority responsible for the purpose of national or regional type approval, a vehicle type approved to .
14.4. Existing approvals for front fog lamps already granted under the preceding series of amendments to this RegulationRegulation shall remain valid indefinitely.
14.5. Even As from 60 months after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 11 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N22013), Contracting Parties applying this Regulation shall refuse to grant type any extensions of approvals only if the vehicle type for all Class B front fog lamps except those intended as replacements for fitting to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendmentsvehicles in use. Contracting Parties applying this Regulation shall not refuse continue to grant extensions of type approvals for existing types all Class F3 front fog lamps. Annex 1 Communication (Maximum format: A4 (210 x 297 mm)) issued by: Name of administration: Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a type of front fog lamp pursuant to Regulation No. 19 Approval No................................…. Extension No......................................….
1. Trade name or mark of the device: ..............................................................................
2. Type of the device: .......................................................................................................
3. Manufacturer's name for the type of device: ................................................................
4. Manufacturer's name and address: ...............................................................................
5. If applicable, name and address of the manufacturer's representative: ........................
6. Submitted for approval on: ..........................................................................................
7. Technical Service responsible for conducting approval tests: .....................................
8. Date of report issued by that Service: ..........................................................................
9. Number of report issued by that Service: .....................................................................
10. Concise description: .....................................................................................................
10.1. Class as described by the relevant marking: (B, B/, BPL, B/PL, F3, F3, F3/, F3PL, F3/PL) ............................................................. 1 Distinguishing number of the country which have been granted according to phase 1 has granted/refused/withdrawn approval (see paragraph 6.2.2. above) or approval provisions in the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above).
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 9.1. As from the official date of entry into force of the 03 04 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-UN type approvals under this Regulation as amended by the 03 04 series of amendments.
9.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016September 2018, Contracting Parties applying this Regulation shall grant type-approvals only if the type of vehicle type corresponds to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 04 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
9.3. As from 1 July 2022September 2021, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
9.4. Even Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting accept UN type approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation.
9.5. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 05 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national to grant or regional type approval of a vehicle refuse to accept UN type-approved to phase 1 (see paragraph 6.2.2. above) or approvals under this Regulation as amended by the 02 05 series of amendments to this Regulationamendments.
9.6. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2September 2023, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved UN type-approvals to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments amendments, first issued after 1 September 2023.
9.7. Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation. Even Regulation after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept UN type-approvals and extensions which were granted in accordance with any of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation.
9.8. Transitional Provisions for Phase 3 (see Notwithstanding paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M39.6., Contracting Parties applying this Regulation shall grant continue to accept UN type-approvals only if to the preceding series of amendments to this Regulation, first issued after 1 September 2023 and extension thereof, for the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended types which are not affected by the 03 changes introduced by the 05 series of amendments.
9.9. Contracting Parties applying this Regulation shall not refuse to grant extensions of type UN type-approvals for existing types which have been granted according to phase 2 according any preceding series of amendments to paragraph 6.2.2. abovethis Regulation or extensions thereof.
Appears in 1 contract
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments17.1. As from the official date of entry into force of the 03 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 03 series of amendments.
17.2. As from 12 months after the date of entry into force, Contracting Parties applying this Regulation shall grant approvals only if the child restraint system type approvals to the vehicle type which be approved meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments.
17.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types During the 12-month period which have been granted according to follows the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall can continue to grant type approvals to the vehicle type those child restraint systems which meets comply with the requirements of phase 3 of this Regulation as amended by the 03 02 series of amendments.
17.4. In the same period of 12 months, Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according approval to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
17.5. Even after As from the date of entry into force of the 03 series of amendments amendments, the provisions of Annex 16 to this RegulationRegulation shall apply also to child restraint devices already type approved to the 02 series of amendments.
17.6. Starting from the date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting refuse the sale of a type approvals and extensions of type approvals to phase 1 (see paragraph child restraint which does not meet the requirements of paragraphs 6.2.2. above) or and 6.2.14. of the preceding 03 series of amendments.
17.7. Starting 36 months after the entry into force of the 03 series of amendments, Contracting Parties applying this Regulation may refuse the sale of child restraint systems which do not meet the requirements of the 03 series of amendments to this Regulation.
17.8. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2the date of entry into force of supplement 2 to the 03 series of amendments, N3 and M3 and the label required by paragraph 4.5. of this Regulation shall be affixed to all new child restraints manufactured in conformity with this Regulation.
17.9. As from the official date of entry into force of the 04 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 04 series of amendments.
17.10. As from 1 July 2026 for vehicles types 12-months after the date of category N2, N3 and M3entry into force of the 04 series of amendments, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle child restraint system type to be approved meets the requirements of phase 3 (see paragraph 6.2.2this Regulation as amended by the 04 series of amendments.
17.11. above) During the 12-month period which follows the date of entry into force of the 04 series of amendments, Contracting Parties applying this Regulation can continue to grant type approvals to those child restraint systems which comply with the requirements of this Regulation as amended by the 03 series of amendments.
17.12. During the 36-month period which follows the date of entry into force of the 04 series of amendments, Contracting Parties applying this Regulation shall not refuse to grant extensions of type approval to the preceding series of amendments to this Regulation.
17.13. Starting 48-months after the entry into force of the 04 series of amendments, Contracting Parties applying this Regulation may refuse the sale of child restraint systems which do not meet the requirements of the 04 series of amendments to this Regulation.
17.14. As from six months from the date of entry into force of Supplement 04 to the 04 series of Amendments approvals granted in accordance with the 03 or 04 series of amendments for existing types child restraint systems belonging to groups 0, 0+ and I which have been granted according do not comply with paragraph 6.1.11. or 6.1.12. shall cease to phase 2 according be valid.
17.15. From the date of entry into force of Supplement 4 to the 04 series of Amendments of this Regulation, by way of derogation to the obligations of Contracting Parties during the transitional period set out in paragraph 6.2.217.14. aboveand based on the declaration made by the European Community at the time of its accession to the 1958 Agreement (Depositary Notification C.N.60.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 16.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 01 series of amendments.
16.2. As from 1 September 2018, Contracting Parties applying this Regulation shall grant approvals only if the Enhanced Child Restraint System type to be approved meets the requirements of this Regulation as amended by the 01 series of amendments.
16.3. Until 1 September 2018, Contracting Parties applying this Regulation can continue to grant type approvals to Enhanced Child Restraint Systems which comply with the requirements of this Regulation as in its original version.
16.4. Until 1 September 2020, Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the original version of this Regulation.
16.5. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-type approvals under to this Regulation as amended by the 03 02 series of amendments.
16.6. Transitional Provisions for Phase Until 1 (see paragraph 6.2.2September 2020, type approvals to the preceding series of amendments to the Regulation which are not affected by the 02 series of amendments to the Regulation shall remain valid and Contracting Parties applying this Regulation shall continue to accept them.
16.7. above) As from Until 1 July 2016September 2022, Contracting Parties applying this Regulation shall not refuse to grant type-approvals only if extensions of approval to the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 01 series of amendmentsamendments to this Regulation.
16.8. As from the official date of entry into force of the 03 series of amendments, no Contracting Parties Party applying this Regulation shall refuse to grant type or refuse to accept UN type-approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of under this Regulation as amended by the 03 series of amendments.
16.9. As from 1 September 2020, Contracting Parties applying this Regulation shall not refuse be obliged to grant extensions of type accept UN type-approvals for existing types which have been granted according to the 02 preceding series of amendments to this Regulation. Until 30 June 2022amendments, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulationfirst issued after 1 September 2020.
16.10. As from 1 July September 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved type-approvals issued to the preceding series of amendments to this Regulation.
16.11. Even after the date of entry into force of the 03 series of amendments to this RegulationNotwithstanding paragraphs 16.9 and 16.10, Contracting Parties applying this the UN Regulation may shall continue for national or regional purposes granting type to accept UN type-approvals and extensions of type approvals issued according to the preceding series of amendments to this the UN Regulation. Transitional Provisions , for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for the vehicles/vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if systems which are not affected by the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended changes introduced by the 03 series of amendments. Furthermore(Maximum format: A4 (210 x 297 mm) Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of restraining devices for child occupants of power-driven vehicles, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this pursuant to UN Regulation shall grant No. 129. Approval No. ...................……………… Extension No. ...........................................
1.1. Forward-facing child restraint/rearward-facing child restraint/lateral-facing child restraint
1.2. Integral/Non integral;2
1.3. Belt type:2 (Adult) three-point belt (Adult) lap belt Special type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendmentsbelt/retractor2
1.4. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.Other features: chair assembly/impact shield2 ..................................................
Appears in 1 contract
Transitional Provisions. 11.1. As from the official date of entry into force of the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approval under this Regulation as amended by the 02 series of amendments.
11.2. As from 1 October 1995, Contracting Parties applying this Regulation shall grant ECE approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 02 series of amendments.
11.3. As from 1 October 1996, Contracting Parties applying this Regulation may refuse first national registration (first entry into service) of a vehicle which does not meet the requirements of the 02 series of amendments to this Regulation.
11.1. As from the official date of entry into force of the 03 series of amendments to this UN Regulation, no Contracting Party applying this UN Regulation shall refuse to grant or refuse to accept UN type-approvals under this UN Regulation as amended by the 03 series of amendments.
11.2. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if For the vehicle type to be approved meets the requirements limit values of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by defined in the 03 series of amendmentstable under ▇.▇.▇.▇:
11.2.1. As from …months [target date: 1. July 2016] after the official date of entry into force of the 03 series of amendments, Contracting Parties applying this UN Regulation shall grant type UN type-approvals to only if the vehicle type which to be approved meets the requirements of phase 2 or phase 3 of this UN Regulation as amended by the 03 series of amendments.
11.2.2. Contracting Parties applying this UN Regulation shall not refuse to grant extensions of type UN type-approvals for existing types which have been granted according to the 02 preceding series of amendments to this UN Regulation.
11.2.3. Until 30 June As from … months [target date: 1. July 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval ] after the date of a vehicle type-approved to the 02 entry into force of 03 series of amendments to this UN Regulation. As from 1 July 2022, Contracting Parties applying this UN Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation.
11.3. Even For the limit values of phase 2 as defined in the table under ▇.▇.▇.▇:
11.3.1. As from … months [target date: 1. July 2020] after the date of entry into force of the 03 series of amendments to this UN Regulation for vehicle types other than N2 and as from … months [target date: 1. July 2022] after the date of entry into force of the 03 series of amendments to this UN Regulation for vehicles types of category N2, Contracting Parties applying this UN Regulation shall grant UN type-approvals only if the vehicle type to be approved meets the requirements of this UN Regulation as amended by the 03 series of amendments.
11.3.2. Contracting Parties applying this UN Regulation shall not refuse to grant extensions of UN type-approvals for existing types which have been granted according to the preceding series of amendments to this UN Regulation.
11.3.3. As from [8 years1. July 2022] after the date of entry into force of the 03 series of amendments to this Regulation for vehicles other than N2 and as from [9 years1. July 2023] after the date of entry into force of the 03 series of amendments for vehicles types of category N2, Contracting Parties applying this Regulation may continue granting for national or regional purposes, type approvals and extensions of type approvals to the previous series of amendments to this Regulation.
11.4. For the limit values of phase 3 as defined in the table under ▇.▇.▇.▇:
11.4.1. As from [10 years1. July 2024] after the date of entry into force of the 03 series of amendments for vehicle types other than N2, N3 and M3 and as from [12 years1. July 2026] after the date of entry into force of the 03 series of amendments for vehicles types of category N2, N3 and M3, Contracting Parties applying this UNECE Regulation shall grant UNECE type-approvals only if the vehicle type to be approved meets the requirements of this UNECE Regulation as amended by the 03 series of amendments.
11.4.2. Contracting Parties applying this UNECE Regulation shall not refuse to grant extensions of UNECE type-approvals for existing types which have been issued according to the preceding series of amendments to this UNECE Regulation.
11.4.3. As from [12 years1. July 2026] after the date of entry into force of the 03 series of amendments to this Regulation for vehicles other than N2, N3 and M3 and as from [13 years1. July 2027] after the date of entry into force of the 03 series of amendments for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation may continue granting for national or regional purposes, type approvals and extensions of type approvals to the previous series of amendments to this Regulation.
11.5. As from [1. July 2022] for vehicles other than N2 and as from [1. July 2023] for vehicles types of category N2As from [x] after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue shall not be obliged to accept, for the purpose of national or regional purposes granting type approvals and extensions of type approvals type-approval, a vehicle type-approved to the preceding series of amendments to this Regulation.
11.6. Transitional Provisions for Phase 2 (see paragraph 6.2.2. Notwithstanding the transitional provisions above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) whose application of this Regulation as amended by comes into force after the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 most recent series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall are not be obliged to accept for the purpose type- approvals which were granted in accordance with any of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation.
11.7. Even For the first five years after the date of official entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals vehicles with a serial hybrid drive train which have a combustion engine with no mechanical coupling to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As power train are excluded from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase paragraph 6.2.3.
11.8. Until 1st January 2019 ISO 10844:1994 may be applied as an alternative to ISO 10844:2011 to check compliance of the test track as described in Annex 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. abovepoint 3.1.1.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals under this Regulation as amended by the 03 series of amendments. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments13.1. As from the official date of entry into force of the 03 06 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 06 series of amendments.
13.2. As from 1 October 1999, Contracting Parties applying this Regulation shall grant approvals only if the requirements of this Regulation, as amended by the 06 series of amendments, are satisfied.
13.3. As from 1 October 2001, Contracting Parties applying this Regulation may refuse to recognize approvals which were not granted in accordance with the 06 series of amendments to this Regulation.
13.4. As from the official date of entry into force of the 07 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 07 series of amendments.
13.5. As from 24 months after the date of entry into force of the 07 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to approval only if the vehicle type which meets to be approved complies with the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 07 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation. Until 30 June 2022, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to the 02 series of amendments to this Regulation.
13.6. As from 1 July 2022, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even 48 months after the date of entry into force of the 03 07 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type existing approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type cease to be approved meets valid, except in the case of vehicle types which comply with the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 07 series of amendments.
13.7. Furthermore, as As from the official date of entry into force of the 03 08 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approvals under this Regulation as amended by the 08 series of amendments.
13.8. As from 24 months after the date of entry into force of the 08 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets only if the requirements of phase 3 of this Regulation Regulation, as amended by the 03 08 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulationare satisfied.
13.9. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even 36 months after the date of entry into force of the 03 08 series of amendments to this Regulationamendments, Contracting Parties applying this Regulation may continue for national or regional purposes granting type refuse to recognize approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or which were not granted in accordance with the preceding 08 series of amendments to this Regulation.
13.10. Transitional Provisions for Phase 3 (see paragraph 6.2.2Notwithstanding paragraphs 13.8. above) and 13.9., approvals of the vehicle categories which are not affected by the 08 series of amendments shall remain valid and Contracting Parties applying the Regulation shall continue to accept them.
13.11. As from 1 July 2024 for vehicle types other than N2, N3 and M3 and long as from 1 July 2026 for vehicles types there are no requirements forbidding side-facing seats in their national requirements at the time of category N2, N3 and M3acceding to this Regulation, Contracting Parties applying may continue to allow the fitting of side-facing seats for the purpose of national approval and in this Regulation case these bus categories cannot be type approved under this Regulation
13.12. The exemption referred to in paragraph 5.1.3. shall grant type-approvals only cease to have effect on 20 October 2010. It may be extended if the vehicle type to be approved meets the requirements reliable accident statistics are available and there has been further development of phase 3 (see paragraph 6.2.2restraint systems. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.Annex 1
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Transitional Provisions. 12.1. As from the official date of entry into force of the 03 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant approval under this Regulation as amended by the 01 series of amendments.
12.2. As from 36 months after the date of entry into force of the 01 series of amendments, Contracting Parties applying this Regulation with respect to the temporary-use spare wheels/tyres, run-flat tyres or a run-flat system shall grant approvals only if the vehicle type to be approved meets the requirements of this Regulation as amended by the 01 series of amendments.
12.3. Contracting Parties applying this Regulation shall not refuse to grant extensions of approval to the preceding series of amendments to this Regulation.
12.4. Contracting Parties applying this Regulation shall continue to grant approvals to those types of vehicles which comply with the requirements of this Regulation as amended by the preceding series during the 36 months' period which follows the date of entry into force of the 01 series of amendments.
12.5. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type-approvals approval under this Regulation as amended by the 03 02 series of amendments.
12.6. Transitional Provisions for Phase 1 (see paragraph 6.2.2. above) As from 1 July 2016November 2012, Contracting Parties applying this Regulation shall may refuse to grant type-approvals only national or regional approval to a vehicle type of categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the vehicle type to be approved meets does not meet the requirements of phase 1 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. As from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 2 or phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to the 02 series of amendments to this Regulation.
12.7. Until 30 June 2022As from 1 November 2014, no Contracting Party Parties applying this Regulation shall may refuse first national or regional type approval registration (first entry into service) of a vehicle type-approved in categories M1 up to a maximum mass of 3,500 kg and N1, in both cases with all axles equipped with single tyres, if the vehicle type does not meet the requirements of the 02 series of amendments to this Regulation.
12.8. As from 1 July 2022Notwithstanding the transitional provisions above, Contracting Parties applying whose application of this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to the preceding series of amendments to this Regulation. Even comes into force after the date of entry into force of the 03 most recent series of amendments are not obliged to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type accept approvals and extensions which were granted in accordance with any of type approvals to the preceding series of amendments to this Regulation. Transitional Provisions for Phase 2 (see paragraph 6.2.2. above) As from 1 July 2020 for vehicle types other than N2 and as from 1 July 2022 for vehicles types of category N2, Contracting Parties applying this Regulation shall grant type approvals only if the vehicle type to be approved meets the requirements of phase 2 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Furthermore, as from the official date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall grant type approvals to the vehicle type which meets the requirements of phase 3 of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. Until 30 June 2022 for vehicle types other than N2 and until 30 June 2023 for vehicles types of category N2, no Contracting Party applying this Regulation shall refuse national or regional type approval of a vehicle type-approved to phase 1 (see paragraph 6.2.2. above) or the 02 series of amendments to this Regulation. As from 1 July 2022 for vehicle types other than N2 and as from 1 July 2023 for vehicles types of category N2, Contracting Parties applying this Regulation shall not be obliged to accept for the purpose of national or regional type approval, a vehicle type approved to phase 1 (see paragraph 6.2.2.1. above) or the preceding series of amendments to this Regulation. Even after the date of entry into force of the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may continue for national or regional purposes granting type approvals and extensions of type approvals to phase 1 (see paragraph 6.2.2. above) or the preceding series of amendments to this Regulation. Transitional Provisions for Phase 3 (see paragraph 6.2.2. above) As from 1 July 2024 for vehicle types other than N2, N3 and M3 and as from 1 July 2026 for vehicles types of category N2, N3 and M3, Contracting Parties applying this Regulation shall grant type-approvals only if the vehicle type to be approved meets the requirements of phase 3 (see paragraph 6.2.2. above) of this Regulation as amended by the 03 series of amendments. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types which have been granted according to phase 2 according to paragraph 6.2.2. above.
Appears in 1 contract
Sources: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles