Common use of Transitional Provisions Clause in Contracts

Transitional Provisions. 12.1. As from the official date of entry into force of the 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 01 series of amendments. 12.2. As from 1 May 2024, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version of this Regulation, first issued after 1 May 2024. 12.3. Until 1 May 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024. 12.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version of this Regulation, for vehicles which are not affected by the changes introduced by the 01 Series of amendments. 12.6. Contracting Parties applying this Regulation shall not refuse to grant type approvals according to any preceding series of amendments to this Regulation or extensions thereof. issued by : (Name of administration) ...................................... ...................................... ...................................... 10Concerning: 11 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a type of vehicle with regard to the advanced emergency braking system pursuant to UN Regulation No. 152 Approval No.: .

Transitional Provisions. 12.1. As from the official date of entry into force of the 01 12 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 01 12 series of amendments. 12.2. As from 1 May September 2024, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version preceding series of this Regulationamendments, first issued after 1 May September 2024. 12.3. Until 1 May September 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version preceding series of this Regulationamendments, first issued before 1 May September 2024. 12.4. As from 1 May September 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version preceding series of amendments to this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version preceding series of amendments to this Regulation, for the vehicles which are not affected by the changes introduced by the 01 Series 12 series of amendments. 12.6. Contracting Parties applying this Regulation shall not refuse to may grant type approvals according to any preceding series of amendments to this Regulation. 12.7. Contracting Parties applying this Regulation or shall continue to grant extensions thereofof existing approvals to any preceding series of amendments to this Regulation. Annex 1 Braking equipment, devices, methods and conditions not covered by this Regulation 1. Method of measuring reaction ("response") times in brakes other than compressed-air brakes. Annex 2 Communication (Maximum format: A4 (210 x 297 mm)) issued by by: (Name of administration) ...................................... ...................................... ...................................... 10Concerning: 11 Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively definitely discontinued of a vehicle type of vehicle with regard to the advanced emergency braking system pursuant to UN Regulation No. 152 13. Approval No. ……….…………….. Extension No. ………………………….… 1. Trade name or mark of the vehicle:......................................................................... 2. Vehicle category:..................................................................................................... 3. Vehicle type: ........................................................................................................... 4. Manufacturer's name and address:........................................................................... ................................................................................................................................. 5. If applicable, name and address of manufacturer's representative: ................................................................................................................................. 6. Mass of vehicle: 6.1. Maximum mass of vehicle: ..................................................................................... 6.2. Minimum mass of vehicle: ...................................................................................... 7. Distribution of mass of each axle (maximum value):.............................................. 8. Make and type of brake linings, discs and drums: 8.1. Brake linings 8.1.1. Brake linings tested to all relevant prescriptions of Annex 4 .................................. 1 Distinguishing number of the country which has granted/extended/refused/withdrawn approval (see approval provisions in the Regulation).

Transitional Provisions. 12.115.1. As from the official date of entry into force of the 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 01 series of amendments. 5 Through the online platform ("/343 Application") provided by UNECE and dedicated to the exchange of such information: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/trans/main/wp29/datasharing.html 12.215.2. As from 1 May 2024September 2023, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version of this Regulation, first issued after 1 May 2024September 2023. 12.315.3. Until 1 May 2026September 2027, Contracting Parties applying this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024September 2023. 12.415.4. As from 1 May 2026September 2027, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version preceding series of amendments to this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version of this Regulation, for vehicles which are not affected by the changes introduced by the 01 Series of amendments. 12.615.5. Contracting Parties applying this Regulation shall not refuse to may grant type approvals according to any preceding series of amendments to this Regulation. 15.6. Contracting Parties applying this Regulation or shall continue to grant extensions thereofof existing approvals to any preceding series of amendments to this Regulation. issued by (Maximum format: A4 (Name of administration210 x 297 mm) ...................................... ...................................... ...................................... 10Concerning: 11 Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a vehicle type of vehicle with regard to the advanced emergency braking system steering equipment pursuant to UN Regulation No. 152 157 Approval No.. .................. Reason for extension or revision: ............................................................................................. 1. Trade name or mark of vehicle ....................................................................................

Transitional Provisions. 12.114.1. As from the official date of entry into force of the 01 series of amendmentsSupplement 8, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by Supplement 8 to the 01 series original version of amendmentsthe Regulation. 12.214.2. As from 1 May 202424 months from the entry into force of Supplement 8, Contracting Parties applying this Regulation shall not grant approvals only if the headlamp type to be obliged to accept type approvals approved meets the requirements of this Regulation as amended by Supplement 8 to the original version of this the Regulation, first issued after 1 May 2024. 12.314.3. Until 1 May 2026, Contracting Parties applying Approvals granted under the preceding supplements to this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024remain valid. 12.414.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type grant approvals issued according on the basis of the preceding supplements to the original version of this Regulation, provided that the headlamps are intended as replacements for fitting to vehicles which are not affected by the changes introduced by the 01 Series of amendmentsin use. 12.614.5. Contracting Parties applying this Regulation shall not refuse to grant type extensions of approvals according to any the preceding series of amendments supplements to this Regulation or extensions thereofRegulation. Annex 1 Communication (maximum format: A4 (210 x 297 mm)) issued by by: (Name of administration) : ...................................... ...................................... ...................................... 10Concerningconcerning2: 11 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued APPROVAL GRANTED APPROVAL EXTENDED APPROVAL REFUSED APPROVAL WITHDRAWN PRODUCTION DEFINITIVELY DISCONTINUED of a type of vehicle with regard to the advanced emergency braking system headlamp pursuant to UN Regulation No. 152 112 Approval No.…. Extension No.…. 1. Trade name or mark of the ▇▇▇▇ce: .............................................................................. 2. Manufacturer's name for the type of device: ................................................................ 3. Manufacturer's name and address: ............................................................................... 4. If applicable, name and address of manufacturer's representative: .............................. 5. Submitted for approval on: .......................................................................................... 6. Technical Service responsible for conducting approval tests: ..................................... 7. Date of report issued by that service: ........................................................................... 8. Number of report issued by that service: ..................................................................... 1 Distinguishing number of the country which has granted/refused/withdrawn approval (see the provisions of the Regulation concerning approval). 2 Strike out which does not apply. 9. Brief description: Category as described by the relevant marking3: ......................................................... ...................................................................................................................................... ...................................................................................................................................... Number and category(s) of filament lamp(s): .............................................................. ...................................................................................................................................... ...................................................................................................................................... Measures according to paragraph 5.8. of this Regulation: ...........................................

Transitional Provisions. 12.1. As from the official date of entry into force of the 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 01 series of amendments. 12.2. As from 1 May 2024, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version of this Regulation, first issued after 1 May 2024. 12.3. Until 1 May 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024. 12.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version of this Regulation, for vehicles which are not affected by the changes introduced by the 01 Series of amendments. 12.6. Contracting Parties applying this Regulation shall not refuse to grant type approvals according to any preceding series of amendments to this Regulation or extensions thereof. 9 The UNECE secretariats provides the online platform (“/343 Application”) for exchange of such information with the secretariat: ▇▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/trans/main/wp29/datasharing.html issued by : (Name of administration) ...................................... ...................................... ...................................... 10ConcerningConcerning: 11 2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a type of vehicle with regard to the advanced emergency braking system pursuant to UN Regulation No. 152 Approval No.:............................................ . ............................................................................. 1. Trademark:.................................................................................................................... 2. Type and trade name(s):................................................................................................ 3. Name and address of manufacturer:.............................................................................. 4. If applicable. name and address of manufacturer’s representative: ............................... 5. Brief description of vehicle:.......................................................................................... 6. Date of submission of vehicle for approval: ................................................................ 7. Technical Service performing the approval tests: ........................................................ 8. Date of report issued by that Service: ........................................................................... 9. Number of report issued by that Service:...................................................................... 10. Approval 10 1. to car to car scenario granted/refused/extended/withdrawn:2 10 2. to car to pedestrian scenario granted/refused/extended/withdrawn:2 11. Place:............................................................................................................................. 12. Date:..............................................................................................................................

Transitional Provisions. 12.1. As from the official date of entry into force of the 01 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 01 series of amendments. 12.2. As from 1 May 2024September 2025, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version preceding series of this Regulationamendments, first issued after 1 May 2024September 2025. 12.3. Until 1 May 2026September 2027, Contracting Parties applying this Regulation shall accept type approvals to the original version preceding series of this Regulationamendments, first issued before 1 May 2024September 2025. 12.4. As from 1 May 2026September 2027, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version preceding series of amendments to this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version of this Regulation, for vehicles which are not affected by the changes introduced by the 01 Series of amendments. 12.6. Contracting Parties applying this Regulation shall not refuse to may grant type approvals according to any preceding series of amendments to this Regulation. 12.6. Contracting Parties applying this Regulation or shall continue to grant extensions thereofof existing approvals to any preceding series of amendments to this Regulation. 12.7. issued by Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the most recent series of amendments are not obliged to accept approvals which were granted in accordance with any of the preceding series of amendments to this Regulation. ( Issued by: (Name of administration: …………....................... …………....................... …………....................... …………....................... Maximum format: A4 (210 x 297 mm)) ...................................... ...................................... ...................................... 10Concerning: 11 Concerning:6 Approval granted granted, Approval extended extended, Approval refused refused, Approval withdrawn withdrawn, Production definitively discontinued discontinued, of a vehicle type of vehicle with regard to the advanced emergency braking system its electrical safety pursuant to UN Regulation No. 152 Approval No.: .136

Transitional Provisions. 12.131.1. As from the official date of entry into force of the 01 03 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals of vehicles, components or separate technical units under Parts I, II or III of this Regulation as amended by the 01 03 series of amendments. 12.231.2. Until 1 September 2019, Contracting Parties applying this Regulation shall not refuse to grant or refuse to accept type approvals of vehicles, components or separate technical units under Part I, II or III of this Regulation as amended by the 02 series of amendments. 31.3. As from 1 May 2024September 2019, Contracting Parties applying this Regulation shall grant approvals only if the type of vehicle, component or separate technical unit to be approved meets the requirements of Part I, II or III of this Regulation as amended by the 03 series of amendments. 31.4. As from 1 September 2021, Contracting Parties applying this Regulation shall not be obliged to accept accept, for the purpose of national or regional type approvals approval, a vehicle, component or separate technical unit which is not type approved under Part I, II or III of the 03 series of amendments to the original version of this Regulation, first issued after 1 May 2024. 12.3. Until 1 May 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024. 12.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.531.5. Notwithstanding paragraph 12.4.Until 1 September 2021, Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version of this Regulation, for vehicles which are not affected by the changes introduced by the 01 Series of amendments. 12.6. Contracting Parties applying this Regulation shall not refuse to grant type extensions of approval for vehicles, components or separate technical units which comply with this Regulation as amended by the 02 series of amendments. However, Contracting Parties which are still accepting approvals according to the 02 series of amendments as given in paragraph 31.4. beyond 1 September 2021 shall not refuse to grant extensions to approvals after 1 September 2021. 31.6. Notwithstanding the transitional provisions above, Contracting Parties whose application of this Regulation comes into force after the date of entry into force of the most recent series of amendments are not obliged to accept approvals which were granted in accordance with any of the preceding series of amendments to this Regulation or extensions thereofRegulation. issued by by: (Name of administration) : ...................................... ...................................... ...................................... 10Concerning(Maximum format: 11 A4 (210 x 297 mm) Concerning:0 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a type of vehicle with regard to the advanced emergency braking system rear underrun protective device (RUPD) pursuant to UN Regulation No. 152 Approval No.: .58

Transitional Provisions. 12.1. As from 1 November 2011, Contracting Parties applying this Regulation may refuse to grant national or regional type approval if the vehicle type does not meet the requirements of this Regulation as amended by Supplement 9 or Supplement 10 or Supplement 11 and is not fitted with an Electronic Stability Control System and a Brake Assist System, both meeting the requirements of Annex 9 to this Regulation. 12.2. As from 1 November 2013, Contracting Parties applying this Regulation may refuse first national registration of a vehicle which does not meet the requirements of this Regulation as amended by Supplement 9 or Supplement 10 or Supplement 11 and is not fitted with an Electronic Stability Control System and a Brake Assist System, both meeting the requirements of Annex 9 to this Regulation. 12.3. As from the official date of entry into force of the 01 series Supplement 11 (30 January 2011) to the original version of amendmentsthis Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals ECE approval under this Regulation as amended by the 01 series of amendments. 12.2. As from 1 May 2024, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version of this Regulation, first issued after 1 May 2024. 12.3. Until 1 May 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024Supplement 11. 12.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type grant approvals issued according to those types of vehicles which comply with the requirements of this Regulation as amended by Supplement 10 to the original version of this Regulation, for vehicles Regulation during the 36 months period which are not affected by follows the changes introduced by the 01 Series date of amendments. 12.6entry into force of Supplement 11. Contracting Parties applying this Regulation shall not refuse to grant type approvals according to any preceding series of amendments to this Regulation or extensions thereof. Communication10 (Maximum format: A4 (210 x 297 mm)) issued by : (Name of administration) : ...................................... ...................................... ...................................... 10Concerningconcerning12: 11 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued APPROVAL GRANTED APPROVAL EXTENDED APPROVAL REFUSED APPROVAL WITHDRAWN PRODUCTION DEFINITELY DISCONTINUED of a vehicle type of vehicle with regard to the advanced emergency braking system braking, pursuant to UN Regulation No. 152 13-H Approval No.: .. . Extension No. .............................. 1. Trade name or ▇▇▇▇ of the vehicle 2. Vehicle type

Transitional Provisions. 12.1. As from the official date of entry into force of the 01 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type type-approvals under this Regulation as amended by the 01 02 series of amendments. 12.2. As from 1 May 2024September 2023, Contracting Parties applying this Regulation shall not be obliged to accept type type-approvals of vehicles having an electric power train operating on high voltage according to the original version 01 series of this Regulationamendments, first issued after 1 May 2024September 2023. 12.3. Until 1 May 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024. 12.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type type-approvals issued of vehicles not having an electric power train operating on high voltage according to the original version 01 series of this amendments to the Regulation, for vehicles which are not affected by the changes introduced by the 01 Series of amendments. 12.612.4. Contracting Parties applying this Regulation shall not refuse to grant type type-approvals according to any preceding series of amendments to this Regulation or extensions thereof. 12.5. issued by Notwithstanding the transitional provisions above, Contracting Parties who start to apply this Regulation after the date of entry into force of the most recent series of amendments are not obliged to accept type-approvals which were granted in accordance with any of the preceding series of amendments to this Regulation. ( Issued by: (Name of administration: …………....................... …………....................... …………....................... …………....................... Maximum format: A4 (210 x 297 mm)) ...................................... ...................................... ...................................... 10Concerning: 11 Concerning:4 Approval granted granted, Approval extended extended, Approval refused refused, Approval withdrawn withdrawn, Production definitively discontinued discontinued, of a vehicle type of vehicle with regard to the advanced emergency braking system protection of the occupants in the event of a frontal collision, pursuant to UN Regulation No. 152 Approval No.: .137

Transitional Provisions. 12.114.1. As from the official date of entry into force of the 01 series of amendmentsSupplement 8, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by Supplement 8 to the 01 series original version of amendmentsthe Regulation. 12.214.2. As from 1 May 202424 months from the entry into force of Supplement 8, Contracting Parties applying this Regulation shall not grant approvals only if the headlamp type to be obliged to accept type approvals approved meets the requirements of this Regulation as amended by Supplement 8 to the original version of this the Regulation, first issued after 1 May 2024. 12.314.3. Until 1 May 2026, Contracting Parties applying Approvals granted under the preceding supplements to this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024remain valid. 12.414.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type grant approvals issued according on the basis of the preceding supplements to the original version of this Regulation, provided that the headlamps are intended as replacements for fitting to vehicles which are not affected by the changes introduced by the 01 Series of amendmentsin use. 12.614.5. Contracting Parties applying this Regulation shall not refuse to grant type extensions of approvals according to any the preceding series of amendments supplements to this Regulation or extensions thereofRegulation. Annex 1 Communication (maximum format: A4 (210 x 297 mm)) issued by by: (Name of administration) : ...................................... ...................................... ...................................... 10Concerningconcerning2: 11 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued APPROVAL GRANTED APPROVAL EXTENDED APPROVAL REFUSED APPROVAL WITHDRAWN PRODUCTION DEFINITIVELY DISCONTINUED of a type of vehicle with regard to the advanced emergency braking system headlamp pursuant to UN Regulation No. 152 112 Approval No.…. Extension No.…. 1. Trade name or mark of the device: .............................................................................. 2. Manufacturer's name for the type of device: ................................................................ 3. Manufacturer's name and address: ............................................................................... 4. If applicable, name and address of manufacturer's representative: .............................. 5. Submitted for approval on: .......................................................................................... 6. Technical Service responsible for conducting approval tests: ..................................... 7. Date of report issued by that service: ........................................................................... 8. Number of report issued by that service: ..................................................................... 1 Distinguishing number of the country which has granted/refused/withdrawn approval (see the provisions of the Regulation concerning approval). 2 Strike out which does not apply. 9. Brief description: Category as described by the relevant marking3: ......................................................... ...................................................................................................................................... ...................................................................................................................................... Number and category(s) of filament lamp(s): .............................................................. ...................................................................................................................................... ...................................................................................................................................... Measures according to paragraph 5.8. of this Regulation: ...........................................

Transitional Provisions. 12.1. As from 1 November 2011, Contracting Parties applying this Regulation may refuse to grant national or regional type approval if the vehicle type does not meet the requirements of this Regulation as amended by Supplement 9 or Supplement 10 or Supplement 11 and is not fitted with an Electronic Stability Control System and a Brake Assist System, both meeting the requirements of Annex 9 to this Regulation. 12.2. As from 1 November 2013, Contracting Parties applying this Regulation may refuse first national registration of a vehicle which does not meet the requirements of this Regulation as amended by Supplement 9 or Supplement 10 or Supplement 11 and is not fitted with an Electronic Stability Control System and a Brake Assist System, both meeting the requirements of Annex 9 to this Regulation. 12.3. As from the official date of entry into force of the 01 series Supplement 11 (30 January 2011) to the original version of amendmentsthis Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals ECE approval under this Regulation as amended by the 01 series of amendments. 12.2. As from 1 May 2024, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version of this Regulation, first issued after 1 May 2024. 12.3. Until 1 May 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version of this Regulation, first issued before 1 May 2024Supplement 11. 12.4. As from 1 May 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version of this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type grant approvals issued according to those types of vehicles which comply with the requirements of this Regulation as amended by Supplement 10 to the original version of this Regulation, for vehicles Regulation during the 36 months period which are not affected by follows the changes introduced by the 01 Series date of amendments. 12.6entry into force of Supplement 11. Contracting Parties applying this Regulation shall not refuse to grant type approvals according to any preceding series of amendments to this Regulation or extensions thereof. issued by Communication1 (Maximum format: A4 (Name of administration210 x 297 mm)) ...................................... ...................................... ...................................... 10Concerningconcerning3: 11 Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued APPROVAL GRANTED APPROVAL EXTENDED APPROVAL REFUSED APPROVAL WITHDRAWN PRODUCTION DEFINITELY DISCONTINUED of a vehicle type of vehicle with regard to the advanced emergency braking system braking, pursuant to UN Regulation No. 152 13-H Approval No.: .. . Extension No. .............................. 1. Trade name or ▇▇▇▇ of the vehicle ........................................................................ 2. Vehicle type ........................................................................................................... 3. Manufacturer's name and address .......................................................................... 4. If applicable, name and address of manufacturer's representative ......................... ................................................................................................................................ 5. Mass of vehicle ...................................................................................................... 5.1. Maximum mass of vehicle ..................................................................................... 5.2. Minimum mass of vehicle ...................................................................................... 6. Distribution of mass of each axle (maximum value) ............................................. 7. Make and type of brake linings ..............................................................................

Transitional Provisions. 12.1. As from the official date of entry into force of the 01 12 series of amendments, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 01 12 series of amendments. 12.2. As from 1 May September 2024, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the original version preceding series of this Regulationamendments, first issued after 1 May September 2024. 12.3. Until 1 May September 2026, Contracting Parties applying this Regulation shall accept type approvals to the original version preceding series of this Regulationamendments, first issued before 1 May September 2024. 12.4. As from 1 May September 2026, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the original version preceding series of amendments to this Regulation. 12.5. Notwithstanding paragraph 12.4., Contracting Parties applying this Regulation shall continue to accept type approvals issued according to the original version preceding series of amendments to this Regulation, for the vehicles which are not affected by the changes introduced by the 01 Series 12 series of amendments. 12.6. Contracting Parties applying this Regulation shall not refuse to may grant type approvals according to any preceding series of amendments to this Regulation. 12.7. Contracting Parties applying this Regulation or shall continue to grant extensions thereofof existing approvals to any preceding series of amendments to this Regulation. 1. issued by Method of measuring reaction ("response") times in brakes other than compressed-air brakes. (Maximum format: A4 (Name of administration210 x 297 mm)) ...................................... ...................................... ...................................... 10Concerning: 11 Concerning:2 Approval granted Approval extended Approval refused Approval withdrawn Production definitively definitely discontinued of a vehicle type of vehicle with regard to the advanced emergency braking system pursuant to UN Regulation No. 152 13. Approval No. ……….…………….. Extension No. ………………………….… 1. Trade name or mark of the vehicle:......................................................................... 2. Vehicle category:..................................................................................................... 3. Vehicle type: ........................................................................................................... 4. Manufacturer's name and address:........................................................................... ................................................................................................................................. 5. If applicable, name and address of manufacturer's representative: ................................................................................................................................. 6. Mass of vehicle: 6.1. Maximum mass of vehicle: ..................................................................................... 6.2. Minimum mass of vehicle: ...................................................................................... 7. Distribution of mass of each axle (maximum value):.............................................. 8. Make and type of brake linings, discs and drums: 8.1. Brake linings 8.1.1. Brake linings tested to all relevant prescriptions of Annex 4 .................................. 1 Distinguishing number of the country which has granted/extended/refused/withdrawn approval (see approval provisions in the Regulation).