Common use of Unbundled Voice Loop – SL2 (UVL-SL2 Clause in Contracts

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneAFN. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone AFN to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneSyniverse. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Syniverse to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth AT&T will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhonePLI. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone PLI to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneMRC. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone MRC to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneCBX One-Stop. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone CBX One-Stop to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone▇▇▇▇▇. SL2 ▇▇▇ circuits can be provisioned with loop Loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Covad to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth AT&T will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneFPB. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone FPB to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneCCI. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone CCI to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneDeland Actel. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Deland Actel to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone▇▇▇▇▇▇▇▇▇▇▇▇. SL2 ▇▇▇ circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone FeroNetworks to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneRent-A-Line. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Rent-A-Line to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneFreedom. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Freedom to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneSouthern Telcom. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Southern Telcom to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneKMC Data. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone KMC Data to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its BellSouth’s discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneSprint. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Sprint to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneCinergy. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Cinergy to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneStarlink. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Starlink to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneGrande. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Grande to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneNationNET. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone NationNET to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneBTI. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone BTI to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneYour Communication Connection Group. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Your Communication Connection Group to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneVarTec. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone VarTec to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneDeltaCom. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone DeltaCom to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneExcel ▇▇▇▇. SL2 ▇▇▇ circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Excel PCHP to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneU-Dial. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone U-Dial to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneOnePoint. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone OnePoint to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneAero. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Aero to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone<<customer_short_name>>. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone <<customer_short_name>> to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.Version: 4Q06 Standard ICA 11/30/06

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneAccess Point. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Access Point to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneQuality Telephone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Quality Telephone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneNGTelecom. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone NGTelecom to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneDSL. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone DSL to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneExcel. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Excel to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone1-800-RECONEX. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone 1-800-RECONEX to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneHome Telecom. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Home Telecom to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneThink 12. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Think 12 to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneStarlink. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Starlink to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneTeraBlue. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone TeraBlue to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneComcast Phone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Comcast Phone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneNetwork PTS. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Network PTS to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneComcast Phone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Comcast Phone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneSouthern Digital. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Southern Digital to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneUS LEC. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone US LEC to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneClearwave Communications. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Clearwave Communications to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneNex-Phon. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Nex-Phon to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneBirch. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Birch to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneEZ Communications. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone EZ Communications to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone▇▇▇▇▇ ▇▇▇▇▇▇▇. SL2 ▇▇▇ circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Seven Bridges to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneConnectNow!. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone ConnectNow! to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneGSC. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone GSC to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneTelstar Communications. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Telstar Communications to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneUTI. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone UTI to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneUniversal Beepers. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Universal Beepers to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneLightning. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Lightning to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneINET. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone INET to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneCovad. SL2 circuits can be provisioned with loop Loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Covad to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth AT&T will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneCommuniGroup. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone CommuniGroup to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or wireor 4-wire circuits, shall have remote access test points, and will be willbe designed with a witha DLR provided to NewPhoneAIN/Birch. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature OCfeature will allow NewPhone allowAIN/Birch to coordinate the installation theinstallation of the Loop with the disconnect of an existing customer’s service customer’sservice and/or number portability service. In these cases, BellSouth AT&T will perform the order conversion with standard withstandard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhonePreferred. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Preferred to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneCharter. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Charter to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneBLC Management. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone BLC Management to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth AT&T will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneUtility USA. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Utility USA to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneConextel. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Conextel to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneProNet. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone ProNet to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneGlobal Crossing. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Global Crossing to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone▇▇▇▇. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone ▇▇▇▇ to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneGlobal Dialtone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Global Dialtone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneInterGlobe. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone InterGlobe to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneMicro-Comm. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Micro-Comm to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneSpectrotel. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Spectrotel to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneBCFL. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone BCFL to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneI-55. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone I-55 to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneTrinity Connect. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Trinity Connect to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneUS LEC. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone US LEC to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhone▇▇▇▇▇▇▇ Telephone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone ▇▇▇▇▇▇▇ Telephone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneFLATEL. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone FLATEL to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneLatin American Telephone. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Latin American Telephone to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneONS. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone ONS to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneKinetix. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Kinetix to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneGlobal Crossing. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Global Crossing to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneSpeedy Reconnect. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone Speedy Reconnect to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneOnFiber. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone OnFiber to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneRing Connection. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇SL2 Loops. The OC feature will allow NewPhone Ring Connection to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.

Unbundled Voice Loop – SL2 (UVL-SL2. Loops may be 2-wire or 4-wire circuits, shall have remote access test points, and will be designed with a DLR provided to NewPhoneNationsLine. SL2 circuits can be provisioned with loop start, ground start or reverse battery signaling. OC is provided as a standard feature on ▇▇▇ ▇▇▇▇▇. The OC feature will allow NewPhone NationsLine to coordinate the installation of the Loop with the disconnect of an existing customer’s service and/or number portability service. In these cases, BellSouth will perform the order conversion with standard order coordination at its discretion during normal work hours.