Working at Heights Sample Clauses
The 'Working at Heights' clause establishes safety requirements and procedures for individuals performing tasks at elevated locations where there is a risk of falling. It typically mandates the use of protective equipment such as harnesses, guardrails, or scaffolding, and may require specific training or supervision for workers involved in these activities. By setting clear standards and responsibilities, this clause aims to minimize the risk of accidents and injuries associated with working above ground level, ensuring a safer work environment and compliance with relevant safety regulations.
POPULAR SAMPLE Copied 10 times
Working at Heights. Fall protection is required when working above six feet or where a risk assessment indicates a risk of fall. • Seller shall, whenever practical, use fall prevention methods such as work platforms and scaffolding. • Full body harnesses are required at all times when required by applicable law or directed by Elk Ridge’s OATR. • Shock absorbing lanyards are required when working above 13 feet. • Adjustable or retractable lanyards are required when working below 13 feet • Working at heights will only be allowed after written approval (permit) has been issued by the Elk Ridge OATR. • All anchorage points must be above the head of the worker and must be certified to ensure that the points can take the required load. • Seller must have a system to ensure that fall protection equipment is tested and certified for use and inspected by the user before use, and that use is discontinued in the event of a fall or where evidence of excessive wear or malfunction is present. • Seller shall have a rescue plan approved by the Elk Ridge OATR in place prior to working at heights.
Working at Heights. The Contractor shall introduce a procedure that requires all working at heights to be avoided where possible. Where working at heights cannot be avoided, the Contractor shall assess all working at heights to satisfy themselves that suitable fall prevention measures are in place before any work activity commences. Where the risk of a fall may still exist, the Contractor shall introduce measures to mitigate a fall, in the event of one occurring. The Contractor shall undertake periodical monitoring of the working platforms and fall prevention measures to ensure they remain adequate and in a good working order.
Working at Heights. The Company, in consultation with the Health and Safety Committee, will develop a Working at Heights Training Program, mirroring the current CAW/Ford package, within six (6) months of the signing of this agreement as of July 2001. This package will be used at this location as a minimum.
Working at Heights. Fall protection is required when working above six feet or where a risk assessment indicates a risk of fall. • Seller shall, whenever practical, use fall prevention methods such as work platforms and scaffolding. • Full body harnesses are required at all times when required by applicable law or directed by Company’s OATR. • Shock absorbing lanyards are required when working above 13 feet. • Adjustable or retractable lanyards are required when working below 13 feet • Working at heights will only be allowed after written approval (permit) has been issued by the Company OATR. • All anchorage points must be above the head of the worker and must be certified to ensure that the points can take the required load. • Seller must have a system to ensure that fall protection equipment is tested and certified for use and inspected by the user before use, and that use is discontinued in the event of a fall or where evidence of excessive wear or malfunction is present. • Seller shall have a rescue plan approved by the Company OATR in place prior to working at heights.
Working at Heights. Secondary retention requirements b. Example of consequences of dropped objects
Working at Heights. The Company, in consultation with the Health and Safety Committee will develop a Working at Heights Training Program, mirroring the current Unifor/Ford package within six (6) months of the signing.
Working at Heights. 14.1.14.1. A height money allowance of $0.60 per hour is to be paid to an Employee engaged in the repair and/or maintenance of structures, pallets, products at a height in each case of 15 metres or more directly above the nearest horizontal plane.
Working at Heights. The appointed Contractor will be responsible to:
1. Ensure all employees adhere to the specifications of the fall protection plan.
2. Ensure that all employees have done working at heights medical and are certified fit to work.
3. Ensure that all employees have done working at heights training and are certified & competent to work at heights.
Working at Heights. The Advisory Standard for Working at Heights and Working on Roofs requires persons working above 2.4 meters to be protected from falling. To ensure compliance with this requirement, the Hotel has developed a “Permit to Work System” and “Working at Heights” procedure. All contractors required to work from roofs or at height must report to the Maintenance Manager or a Safety Management representative (where applicable) to complete, and receive, the appropriate ‘permit’ prior to commencing work. A fall protection plan will also be required to be submitted by the contractor when working at heights. All equipment for working at heights supplied by the contractor, must be well maintained, and must comply with the relevant design standards applicable. Licensed persons only will carry out erection of scaffolding. Persons working in confined spaces are required to follow the local Working in Confined Spaces regulations. The Contractor is responsible for notifying the Maintenance Manager of the location of any employees working in confined spaces at all times.
Working at Heights. Persons that are exposed to fall hazards of six feet or greater above a lower level shall be protected from falling with the appropriate fall protection system (s) for their craft. • All fall protection systems shall be compliant with the Occupational Safety and Health Administration Office that has jurisdiction in the state where the work is being performed. • Persons that are exposed to fall hazards of six feet or greater above a lower level shall be trained to recognize and minimize these hazards. This training shall be compliant with the Occupational Safety and Health Administration Office that has jurisdiction in the state where the work is being performed. These rules apply to all crafts, persons, and contractors of any tier performing any part of ▇▇▇▇ Constructors Company’s contract. • Persons working in an aerial lift will use a fall arrest system at all times during their work.