Application for Relief Work Form Clause Samples

The 'Application for Relief Work Form' clause establishes the requirement for individuals or organizations to formally submit a designated form when seeking approval to perform relief work. This clause typically outlines the necessary information that must be provided, such as the nature of the relief work, the parties involved, and any supporting documentation. By mandating a standardized application process, the clause ensures that all requests are properly documented and reviewed, thereby promoting transparency and consistency in the approval and management of relief work activities.
POPULAR SAMPLE Copied 3 times
Application for Relief Work Form. Employees must fill out one (1) Application For Relief Work form that will be distributed to the department(s)/program(s) and classification(s) where an Employee is on the relief list. Periods of unavailability (48 hours or less) are for unexpected events that could not have been foreseen when the Application For Relief Work form was completed. Requests for absences from relief requirements may be granted insofar as the regular operation of the facility/agency will permit. Employees wanting time away from the workplace for vacation shall request this time in accordance with Article 15.07 – Vacation Period/Posting/scheduling. Employees may request to have vacation credits (hours) inserted into their schedule, to a maximum of full time hours. Along with the AFRW form, OTFT Employees shall provide a copy of schedule hours from other departments/programs and classifications (where applicable).
View SourceView Similar (6)
Application for Relief Work Form. Employees must fill out one (1) Application For Relief Work form that will be distributed to the department(s)/program(s) and classification(s) where an Employee is on the relief list. Periods of unavailability (48 hours or less) are for unexpected events that could not have been foreseen when the Application For Relief Work form was completed. Employees wanting time away from the workplace for vacation shall request this time in accordance with Article 15.07 Vacation Period/Posting/scheduling. Employees may request to have vacation credits (hours) inserted into their schedule, to a maximum of full time hours.
View Source
Application for Relief Work Form. Employees must fill out one (1) Application For Relief Work form that will be distributed to the department(s)/program(s) and classification(s) where an Employee is on the relief list. Periods of unavailability (48 hours or less) are for unexpected events that could not have been foreseen when the Application For Relief Work form was completed. Requests for absences from relief requirements may be granted insofar as the regular operation of the facility/agency will permit. Employees wanting time away from the workplace for vacation shall request this time in accordance with Article
View SourceView Similar (3)

Related to Application for Relief Work Form

  • Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.

  • New Application for Licensure Any time after the three-month period has lapsed from the Effective Date of this Agreement and Respondent has paid the Administrative Penalty set forth in Section III, Paragraph 1 of this Order, Respondent may apply for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement in any or all of the Participating States with the understanding that each State Mortgage Regulator reserves the rights to fully investigate such application for licensure or petition for reinstatement of an MLO Activity Endorsement and may either approve or deny such application or petition pursuant to the normal process for such licensing or endorsement investigations. No license application or petition described in this paragraph will be denied solely based on the facts, circumstances, or consensual resolution provided for in this Agreement. Respondent further agrees that Respondent must satisfy the Administrative Penalty provision prior to submitting an application for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement.

  • Application Process The employees wishing to enter into a job share arrangement will apply in writing to the Employer and forward a copy to the Union outlining the proposed commencement date of the job share, how the hours and days of work will be shared and how communication and continuity of work will be maintained. The Employer shall communicate a decision on a job share request in writing to the applicants. Applications to Job Sharing shall not be unreasonably denied.

  • Termination for Patent Challenge Either Party shall have the right to terminate this Agreement solely on a Shared Product-by-Shared Product basis upon written notice if the other Party or any of its Affiliates challenges the validity, scope or enforceability of or otherwise opposes any Patent (i) included in the Vividion Intellectual Property or Vividion Co-Co Collaboration Intellectual Property and that is licensed to Celgene under this Agreement in any action or proceeding, or (ii) included in the Celgene Intellectual Property or Celgene Co-Co Collaboration Intellectual Property that is licensed to Vividion under this Agreement in any action or proceeding (subject to the exceptions described in this Section 14.3(d), a “Challenge”) (other than as may be necessary or reasonably required to assert a defense, cross-claim or a counter-claim in an action or proceeding asserted by either Party or any of its Affiliates or Licensee Partners against the other Party or any of its Affiliates or to respond to a court request or order or administrative law, request or order) it being understood and agreed that either Party’s right to terminate this Agreement under this Section 14.3(d) shall not apply to any actions undertaken by an Affiliate of the other Party (the “Challenging Party”) that first becomes such an Affiliate as a result of a Change of Control involving the Challenging Party, where such new Affiliate was undertaking any of the activities described in the foregoing clause prior to such Change of Control; provided that a Party’s right to terminate this Agreement under this Section 14.3(d) shall apply to actions undertaken by such new Affiliate if the Challenging Party is the acquiror in such Change of Control and such new Affiliate does not terminate or otherwise cease participating in such action, proceeding, challenge or opposition within thirty (30) days after the effective date of such Change of Control. If a Licensee Partner of either Party challenges the validity, scope or enforceability of or otherwise opposes any Patent included in any of the intellectual property described in this Section 14.3(d) under which such Licensee Partner is sublicensed in any action or proceeding, then the Party that granted such sublicense shall, upon written notice from the other Party, terminate such sublicense. For the avoidance of doubt, an action by a Party or any of its Affiliates (collectively the “Pursuing Party”) in accordance with this Agreement and the Master Agreement to amend claims within a pending patent application of the other Party during the course of the Pursuing Party’s Prosecution of such pending patent application or in defense of a Third Party proceeding, or to make a negative determination of patentability of claims of a patent application of the other Party or to abandon a patent application of the other Party during the course of the Pursuing Party’s Prosecution of such pending patent application, shall not constitute a challenge under this Section 14.3(d). Neither Party shall, and each Party shall ensure that its Affiliates and Licensee Partners do not, use or disclose any Confidential Information of the other Party or any nonpublic information regarding the Prosecution or enforcement of any Vividion Patent, Celgene Co-Co Collaboration Patent or Vividion Co-Co Collaboration Patent (including Joint Co-Co Patents and Joint Patents) to which a Party or any of its Affiliates or (sub)licensees are or become privy as a consequence of the rights granted to such Party pursuant to Article X, in initiating, requesting, making, filing or maintaining, or in funding or otherwise assisting any other Person with respect to, any Challenge.

  • Application for Payment The form acceptable to Owner that is to be used by the Contractor during the course of the Work in requesting payment from the Owner and that is to be accompanied by such supporting documentation as is required by the Contract Documents.