BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL Clause Samples

This clause defines the essential physical characteristics and measurements of the vessel involved in the agreement. It typically specifies details such as length, breadth, draft, tonnage, and other key dimensions that describe the vessel's size and capacity. By clearly stating these particulars, the clause ensures both parties have a mutual understanding of the vessel's specifications, which is crucial for operational planning, compliance, and risk allocation.
POPULAR SAMPLE Copied 2 times
BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL. (a) The basic dimensions and principal particulars of the VESSEL shall be: Length, overall abt. 333 m Length, between perpendiculars abt. 322 m Breadth, moulded abt. 60 m Depth, moulded abt. 29.4 m Design draught, moulded abt. 20.5 m ▇▇▇▇▇▇▇▇▇ draught, moulded abt. 21.6 m Main Engine : HYUNDAI - B&W 7G80ME-C9.2 Nominal Rating: 32,970 kW x 72 RPM MCR: 24,400 kW x 66 RPM NCR: 17,080 kW x 58.6 RPM Main engine to be part load optimized Deadweight, guaranteed : 299,969 metric tons at the ▇▇▇▇▇▇▇▇▇ draught of 21.6 meters on even keel in sea water of specific gravity of 1.025. Speed, guaranteed : 14.8 knots at the design draught of 20.5 meters at the condition of clean bottom and in calm and deep sea with main engine output of 17,080 kW with 15% sea margin. Fuel Consumption, guaranteed : 161.7 grams/kW-hour using marine diesel oil having lower calorific value of 42,700 kj/kg at MCR measured at the shop trial with I.S.O reference conditions. The details of the aforementioned particulars as well as the definitions and method of measurements and calculations are as indicated in the SPECIFICATIONS. (b) The dimensions may be slightly modified by the BUILDER, who also reserves the right to make changes to the SPECIFICATIONS and the PLAN if found necessary to suit the local conditions and facilities of the SHIPYARD, the availability of materials and equipment, the introduction of improved production methods or otherwise, subject to the written approval of the BUYER which the BUYER shall not withhold unreasonably, and all subject to the other relevant provisions of this CONTRACT.
View SourceView Similar (21)
BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL. (a) The basic dimensions and principal particulars of the VESSEL shall be : Length, overall about 333 M Length, between perpendiculars 322 M Breadth, moulded 60 M Depth to Upper Deck, moulded 29.4 M Design draft, moulded, in seawater of specific gravity of 1.025 20.5 M ▇▇▇▇▇▇▇▇▇ draft, moulded, in seawater of specific gravity of 1.025 21.6 M Deadweight on the above moulded design draft of 20.5 M about 280,310 M/T Deadweight on the above moulded ▇▇▇▇▇▇▇▇▇ draft of 21.6 M about 299,910 M/T Main propulsion engine: one (1) HYUNDAI-MAN B&W 7G80ME-C9.2
View SourceView Similar (6)
BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL. (a) The basic dimensions and principal particulars of the VESSEL shall be : Length, overall about 300.0 M Length, between perpendiculars 286.6 M Breadth, moulded 40.0 M Depth to Upper Deck, moulded 24.2 M Design draft, moulded, in seawater of specific gravity of 1.025 12.0 M ▇▇▇▇▇▇▇▇▇ draft, moulded, in seawater of specific gravity of 1.025 14.5 M Deadweight guaranteed on the above moulded design draft of 12.0 M 59,000 M/T Deadweight on the above moulded ▇▇▇▇▇▇▇▇▇ draft of 14.5 M 83,300 M/T Main propulsion engine MAN B&W 10K98MC-C MCR : 77,600 PS x 104 RPM NCR : 69,840 PS x 100.4 RPM Speed guaranteed at 12.0meters design draft at the condition of clean bottom and in calm and deep sea with main engine developing a NCR of 69,840 PS with fifteen per cent (15%) sea margin 25.6 KNOTS Specific Fuel consumption guaranteed of the main engine applying I.S.O. reference conditions to the result of official shop test at a MCR of 77,600 PS using marine fuel oil having lower calorific value of 10,200 Kcal per Kg. 126.0 gr/▇▇▇.▇▇ The details of the above particulars as well as the definitions and method of measurements and calculations are as indicated in the SPECIFICATIONS. (b) All other vessels Hull Number S4002, S4003, S4004 and S4005 shall be built as identical sister ships unless a modification to a design is agreed upon.
View SourceView Similar (5)
BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL. (a) The basic dimensions and principal particulars of the VESSEL shall be : Length, overall about 333 M Length, between perpendiculars 322 M Breadth, moulded 60 M Depth to Upper Deck, moulded 29.4 M Design draft, moulded, in seawater of specific gravity of 1.025 20.5 M S▇▇▇▇▇▇▇▇ draft, moulded, in seawater of specific gravity of 1.025 21.6 M Deadweight on the above moulded design draft of 20.5 M about 280,310 M/T Deadweight on the above moulded s▇▇▇▇▇▇▇▇ draft of 21.6 M about 299,910 M/T Main propulsion engine: one (1) HYUNDAI-MAN B&W 7G80ME-C9.2 Max. Continuous Rating (MCR) : 24,400 kW x 66 rpm Normal Continuous Rating (NCR): 17,080 kW x 58.6 rpm Trial speed at 20.5 meters design draft at the condition of clean bottom and in calm and deep sea with main engine developing a NCR of 17,080 kW with fifteen per cent (15%) sea margin: 14.8 KNOTS Specific Fuel consumption of the main engine applying I.S.O. reference conditions to the result of official shop test at a NCR of 17,080 kW using marine diesel oil having lower calorific value of 42,700 kJ per kg. 154 gr/k▇.▇▇ The details of the above particulars as well as the definitions and method of measurements and calculations are as indicated in the SPECIFICATIONS. (b) The dimensions may be slightly modified by the BUILDER, who also reserves the right to make changes to the SPECIFICATIONS and the PLAN if found necessary to suit the local conditions and facilities of the SHIPYARD, the availability of materials and equipment, the introduction of improved production methods or otherwise, subject to the approval of the BUYER, which the BUYER shall not withhold unreasonably.
View SourceView Similar (3)
BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL. (a) The basic dimensions and principal particulars of the VESSEL shall be: Length, overall Length, between perdediculars Breadth, moulded Depth to Upper Deck, moulded Design draft, moulded, in seawater of specific gravity of 1.025 ▇▇▇▇▇▇▇▇▇ draft, moulded, in seawater of specific gravity of 1.025 Deadweight on the above moulded ▇▇▇▇▇▇▇▇▇ draft of 10.5 M Main propelling machinery: Service speed at 9.0 meters design draft at the condition of clean bottom and in calm and deep sea with main engine developing a NCR of 9,890
View Source
BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL. (a) The basic dimensions and principal particulars of the VESSEL shall be : Length, overall about [***] M Length, between perpendiculars [***] M Breadth, moulded [***] M Depth to Upper Deck, moulded [***] M Design draft, moulded [***] M S▇▇▇▇▇▇▇▇ draft, moulded [***] M Maximum propulsion power (MPP) [***] Kw x [***] rpm Cargo Tank Capacity (100% full, 20℃, Atm. pressure) [***] cubic metres Service speed at [***] meters design draft at the condition of clean bottom and in calm and deep sea with main diesel generator engine developing a MPP of [***] kW with [***] per cent ([***] %) sea margin [***] KNOTS Specific Fuel consumption of the main diesel generator engine in F.O mode applying I.S.O. reference conditions to the result of official shop test at MCR (100% load) using marine diesel oil having lower calorific value of [***] kJ per kg. [***] g/k▇.▇▇ Specific total energy consumption of the main diesel generator engine in gas mode applying I.S.O. reference conditions to the result of official shop test at MCR (100% load) using gas having lower calorific value of [***] kJ per kg and marine diesel oil having lower calorific value of [***] kJ per Kg. [***] kJ/k▇.▇▇ Regasification Units: [***] individual regasification trains Guaranteed Regasification Unit Capacity: [***]mmscf/d Guaranteed Nominal send out rate (Open Loop Mode/Glycol Water): [***]mmscf/d Guaranteed Peak send out rate (Open Loop Mode/Glycol Water): [***]mmscf/d Natural Gas send out pressure at H.P. manifold: 65 ~ 100 bar g Natural Gas send out temperature at H.P. manifold: +5℃ at 13℃ of sea water temperature Natural Gas outlet temperature to be a minimum of 5℃ at the H.P. manifold under all design flow/pressure conditions. (the “GUARANTEED NATURAL GAS SEND-OUT RATE”) The details of the above particulars as well as the definitions and method of measurements and calculations are as indicated in the SPECIFICATIONS. The VESSEL shall have a regasification system with the capability to regasify LNG with the full range of compositions as given in Section 6.10.2 of the SPECIFICATIONS. (b) The dimensions may be slightly modified by the BUILDER, who also reserves the right to make changes to the SPECIFICATIONS and the PLAN if found necessary to suit the local conditions and facilities of the SHIPYARD, the availability of materials and equipment, the introduction of improved production methods or otherwise, subject to the approval of the BUYER which the BUYER shall not withhold unreasonably. (c) The VESSE...
View Source

Related to BASIC DIMENSIONS AND PRINCIPAL PARTICULARS OF THE VESSEL

  • Designation and Principal Amount There is hereby authorized and established a new series of Securities under the Base Indenture, designated as the “6.750% Senior Notes due 2026”, which is not limited in aggregate principal amount. The initial aggregate principal amount of the Senior Notes to be issued under this Supplemental Indenture shall be limited to $500,000,000. Any additional amounts of the series to be issued shall be set forth in a Company Order.

  • MEMBERS OF DIPLOMATIC MISSIONS AND CONSULAR POSTS Nothing in this Agreement shall affect the fiscal privileges of members of diplomatic missions or consular posts under the general rules of international law or under the provisions of special agreements.

  • Principal Place of Business; Other Places of Business The principal place of business of the Company is 1▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇▇, Suite 220, San Diego, CA 92127. The Company may have such other offices as the Member may designate from time to time.

  • Name and Principal Place of Business The name of the Company shall be [NAME OF COMPANY], LLC with a principal place of business located at [PRINCIPAL PLACE OF BUSINESS] or at any other such place of business that the Member(s) shall determine.

  • Corporate Actions, Put Bonds, Called Bonds, Etc Upon receipt of Instructions, the Custodian shall: (a) deliver warrants, puts, calls, rights or similar Securities to the issuer or trustee thereof (or to the agent of such issuer or trustee) for the purpose of exercise or sale, provided that the new Securities, cash or other Assets, if any, acquired as a result of such actions are to be delivered to the Custodian; and (b) deposit Securities upon invitations for tenders thereof, provided that the consideration for such Securities is to be paid or delivered to the Custodian, or the tendered Securities are to be returned to the Custodian. Unless otherwise directed to the contrary in Instructions, the Custodian shall comply with the terms of all mandatory or compulsory exchanges, calls, tenders, redemptions, or similar rights of security ownership of which the Custodian receives notice through data services or publications to which it normally subscribes, and shall promptly notify the appropriate Fund of such action. Each Fund agrees that if it gives an Instruction for the performance of an act on the last permissible date of a period established by the Custodian or any optional offer or on the last permissible date for the performance of such act, the Fund shall hold the Custodian harmless from any adverse consequences in connection with acting upon or failing to act upon such Instructions. If a Fund wishes to receive periodic corporate action notices of exchanges, calls, tenders, redemptions and other similar notices pertaining to Securities and to provide Instructions with respect to such Securities via the internet, the Custodian and such Fund may enter into a Supplement to this Agreement whereby such Fund will be able to participate in the Custodian’s Electronic Corporate Action Notification Service.