Curb and Gutter Sample Clauses
The "Curb and Gutter" clause defines the requirements and standards for the construction or installation of curbs and gutters as part of a project. It typically specifies the materials to be used, dimensions, placement, and any necessary grading or drainage considerations to ensure proper water runoff. This clause ensures that curbs and gutters are built to consistent quality and safety standards, helping to manage stormwater effectively and maintain the integrity of roadways or paved areas.
Curb and Gutter. All required curb and gutter must be completed and without defect prior to the issuance of a Certificate of Occupancy (“C. O.”) for the Subdivision. Developer shall also be responsible for repairing any latent defects and/or failures in the curb and gutter that occur, or first appear, after the issuance of the relevant C.O. and prior to the end of the warranty period and release of Security for the Subdivision.
Curb and Gutter. All required curb and gutter must be completed and without defect prior to the issuance of a Certificate of Occupancy (“C. O.”) for the Project. Developer shall also be responsible for repairing any latent defects and/or failures in the curb and gutter that occur, or first appear, after the issuance of the relevant C.O. and prior to the end of the warranty period and release of Security for the Project.
(1) The curb and gutter on the north side of ▇▇▇▇▇ ▇▇▇▇▇ Drive shall be installed at the time Lot 2 is developed or within two (2) years of the date of this contract whichever comes first.
Curb and Gutter. All parking lots shall be finished with curb and gutter around the perimeter with adequately placed stormwater inlet boxes to collect stormwater. Curb, gutter and sidewalk in the public right of way may be required as additional site improvements.
Curb and Gutter. A. The repair and/or construction of curb and gutter within City of Van Buren street rights-of-way shall be done in accordance with the Van Buren Public Works Standard Specifications, latest edition.
B. Construct curb and gutter on a prepared sub-base, in accordance with these Specifications and the details as shown on the Drawings.
C. The sub-grade shall be free of organic materials, soft clay, spongy material or any other objectionable material. Prepare the sub-grade in accordance with the section on base course and to a proper shape to conform to the accepted cross sections and grade.
D. Provide concrete forms of wood or metal, straight, free from warps or kinks and of sufficient strength. Stake forms securely to resist the pressure of the concrete without spring. Prior to placing concrete, bring the forms to the true approved line and grade and keep them aligned until the concrete has set. Where a face form for a curb is used, it shall be so designed as to permit it to be securely fastened to the other forms.
Curb and Gutter. In all subdivisions as defined herein the Village Board may require the subdivider to construct concrete curb and gutters in accordance with the State of Wisconsin, Department of Transportation Standard Specifications for Highway and Structure Construction. Wherever possible, provision shall be made at the time of construction for driveway access curb cuts.
Curb and Gutter. Developer shall construct curb and gutter and alley entrance as shown on the Subdivision construction Plans approved by the Village and the construction schedule shall be approved by the Director of Community Services.
Curb and Gutter. A. Construct curb and gutter on a prepared sub-base, in accordance with these Specifications and the details as shown on the Drawings.
B. The sub-grade shall be free of organic materials, soft clay, spongy material or any other objectionable material. Prepare the sub-grade in accordance with the section on base course and to a proper shape to conform to the accepted cross sections and grade.
C. Provide concrete forms of wood or metal, straight, free from warps or kinks and of sufficient strength. Stake forms securely to resist the pressure of the concrete without spring. Prior to placing concrete, bring the forms to the true approved line and grade and keep them aligned until the concrete has set. Where a face form for a curb is used, it shall be so designed as to permit it to be securely fastened to the other forms.
▇. ▇▇▇▇▇▇▇ the sub-grade prior to placing concrete. Place the concrete, mixed to the proper consistency, in the forms and tamp thoroughly so that all honeycombing will be eliminated and sufficient mortar will be brought to the surface. Bring the concrete to a smooth, even finish by means of wood float or trowel.
Curb and Gutter. Construct curb and gutter as shown on the Subdivision construction Plans approved by the Village and schedule approved by the Director of Community Services.
Curb and Gutter. (VDOT CG-6)
4.7.1. This bid item shall be measured in linear feet along the face of curb, complete in place. No additional compensation shall be allowed for radial curb.
4.7.2. This bid item shall include excavation; backfill and compaction of VDOT 21A Aggregate; forming using steel forms in good condition (including face form), placement, finishing, curing, and hot/cold weather protection of concrete; expansion and crack control joints, neat saw-cutting of existing pavement, and shoulder restoration behind curb.
Curb and Gutter. Curb and gutter shall be used on all streets and shall be designed to meet the current County standard for either "roll top" curb and gutter which shall measure not less than three (3) feet from edge of pavement to back of curb, or six (6) inch standard curb and gutter. Burning on Site. There shall be no burning of construction debris, materials or vegetation on the Property, except to provide warmth to workmen using drums not exceeding fifty-five (55) gallons.