DB Contractor Responsibility Sample Clauses

The "DB Contractor Responsibility" clause defines the obligations and duties of the design-build contractor in a project. It typically outlines the contractor's accountability for both the design and construction phases, ensuring that all work meets specified standards and complies with applicable laws and regulations. For example, the contractor may be responsible for correcting defects, obtaining necessary permits, and coordinating with subcontractors. This clause serves to clearly allocate risk and responsibility to the contractor, ensuring that the project owner has recourse if the contractor fails to fulfill their obligations.
POPULAR SAMPLE Copied 1 times
DB Contractor Responsibility. DB Contractor agrees that it has full responsibility for the design of the Project and that DB Contractor will furnish the design of the Project, regardless of the fact that prior to the date of the execution of this Agreement certain conceptual design work occurred and was provided to DB Contractor as part of the Schematic Design as a preliminary basis for DB Contractor’s design. DB Contractor specifically acknowledges and agrees that: (a) DB Contractor is not entitled to rely on: (i) the Schematic Design except as specified in Section 3.3.2, (ii) the Reference Information Documents, or (iii) any other documents or information provided by TxDOT, except to the extent specifically permitted in the Contract Documents. (b) DB Contractor is responsible for correcting any Errors in the Schematic Design through the design and/or construction process without any increase in the Price or extension of a Completion Deadline. (c) TxDOT’s liability for Errors in the Schematic Design is limited to its obligations relating to provision of access to parcels within the Schematic ROW limits, and is subject to the requirements and limitations of Section 13. The foregoing shall not be deemed to limit TxDOT’s obligations with respect to Differing Site Conditions as set forth in Section 13.8. (d) DB Contractor’s warranties and indemnities hereunder cover Errors in the Project even though they may arise from or be related to Errors in the Schematic Design. (e) DB Contractor is responsible for verifying all calculations and quantity takeoffs contained in the RFP Documents or otherwise provided by TxDOT.
View SourceView Similar (41)
DB Contractor Responsibility. DB Contractor agrees that it has full responsibility for the design of the Project and that DB Contractor will furnish the design of the Project, excluding only the ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Design, regardless of the fact that prior to the date of the execution of this Agreement certain conceptual design work occurred and was provided to DB Contractor as part of the Schematic Design as a preliminary basis for DB Contractor’s design. DB Contractor specifically acknowledges and agrees that: (a) DB Contractor has diligently reviewed and verified the final ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Design for errors, omissions, inconsistencies or other defects which may affect constructability. (b) DB Contractor is not entitled to rely on: (i) the Schematic Design except as specified in Section 3.3.2, (ii) the Reference Information Documents, or (iii) any other documents or information provided by TxDOT, except to the extent specifically permitted in the Contract Documents. (c) DB Contractor is responsible for correcting any Errors in the Schematic Design through the design and/or construction process without any increase in the Price or extension of a Completion Deadline, subject only to the right to a Change Order with respect to Necessary Basic Configuration Changes to the extent permitted by Section 13.8.7, and except with respect to the ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Design as provided in Sections 4.4.3 and 13.8.5. (d) TxDOT’s liability for Errors in the Schematic Design is limited to its obligations relating to Necessary Basic Configuration Changes as set forth in Section 2.1.3.3 and provision of access to parcels within the Schematic ROW limits, and is subject to the requirements and limitations of Section 13. TxDOT’s liability to DB Contractor for errors, omission and defects in the ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Design is limited to the extent set forth in Section 4.4.3. The foregoing shall not be deemed to limit TxDOT’s obligations with respect to Differing Site Conditions as set forth in Section 13.8. (e) DB Contractor’s warranties and indemnities hereunder cover Errors in the Project even though they may arise from or be related to Errors in the Schematic Design. (f) DB Contractor is responsible for verifying all calculations and quantity takeoffs contained in the RFP Documents or otherwise provided by TxDOT. (g) DB Contractor is responsible for implementing any changes in the ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Design made by the Person who sealed such design documents, as well ...
View SourceView Similar (4)
DB Contractor Responsibility. DB Contractor agrees that it has full responsibility for the design of the Project and that DB Contractor will furnish the design of the Project, regardless of the fact that prior to the date of the execution of this DBA certain conceptual design work occurred and was provided to DB Contractor as part of the Schematic Design as a preliminary basis for DB Contractor’s design.
View SourceView Similar (3)
DB Contractor Responsibility. DB Contractor agrees that it has full responsibility for the design of the Project and that DB Contractor will furnish the design of the Project, excluding only the ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Design, regardless of the fact that prior to the date of the execution of this Agreement certain conceptual design work occurred and was provided to DB Contractor as part of the Schematic Design as a preliminary basis for DB Contractor’s design. DB Contractor specifically acknowledges and agrees that: (a) DB Contractor has diligently reviewed and verified the final ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ Bridges Design for errors, omissions, inconsistencies or other defects which may affect constructability. (b) DB Contractor is not entitled to rely on: (i) the Schematic Design except as specified in Section 3.3.2, (ii) the Reference Information Documents, or (iii) any other documents or information provided by TxDOT, except to the extent specifically permitted in the Contract Documents. (c) DB Contractor is responsible for correcting any Errors in the Schematic Design through the design and/or construction process without any increase in the Price or extension of a Completion Deadline, subject only to the right to a Change Order with respect to Necessary Basic Configuration Changes to the extent permitted by Section 13.8.7, and except with respect to the ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ Design as provided in Sections 4.4.3 and 13.8.5. to the requirements and limitations of Section 13. TxDOT’s liability to DB Contractor for errors, omission and defects in the ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ Bridges Design is limited to the extent set forth in Section 4.4.3. The foregoing shall not be deemed to limit TxDOT’s obligations with respect to Differing Site Conditions as set forth in Section 13.8.
View Source

Related to DB Contractor Responsibility

  • Contractor Responsibility (a) The Contractor shall be responsible for the entire Performance under the Contract regardless of whether the Contractor itself performs. The Contractor shall be the sole point of contact concerning the management of the Contract, including Performance and payment issues. The Contractor is solely and completely responsible for adherence by the Contractor Parties to all applicable provisions of the Contract. (b) The Contractor shall exercise all reasonable care to avoid damage to the State's property or to property being made ready for the State's use, and to all property adjacent to any work site. The Contractor shall promptly report any damage, regardless of cause, to the State.

  • Contractor Responsibilities A. The Contractor shall comply with the reporting requirements of Agency. All reports shall be in writing and, when applicable, in the format specified by the Agency. All reports shall be supported by the Contractor’s records. B. Contractor shall cooperate with the Agency in establishing rate for reimbursement purposes. C. Contractor shall transfer a client from one category of care or service to another only with the written approval of the Agency. D. If the Contractor obtains services for any part of this contract from another vendor, the Contractor is responsible for the fulfillment of the terms of the contract and shall give written notification of such to the Agency for approval.

  • Contractor Responsibility and Debarment A responsible contractor is a contractor who has demonstrated the attribute of trustworthiness, as well as quality, fitness, capacity and experience to satisfactorily perform the contract. It is the COUNTY’s policy to conduct business only with responsible contractors.

  • Customer Responsibility You agree that you are responsible for all access to and use of the Service through your account or password(s) and for any fees incurred for the Service, or for software or other merchandise purchased through the Service, or any other expenses incurred in accordance with the terms of this Agreement. You agree that you are responsible for backing up (a) any data you submit, receive or transfer over the Service, including, without limitation, your email; and (b) any data, files, programs, or applications on any device you connect to the Service. You acknowledge that you are aware that content accessible on or through the Service may contain material that is unsuitable for minors (persons under 18 years of age). You agree to supervise usage of your account by minors. You ratify and confirm any obligations incurred by a minor using your account.