Common use of Design and Drawings Clause in Contracts

Design and Drawings. 10.2.1 Design and Drawings shall be developed in conformity with the Specifications and Standards set forth in Schedule-D. The Design Phase shall immediately commence upon issuance of LOA to the Contractor. Contractor’s submittals during Design Phase for the Scope of Works shall include the following stages;- 1) Design Development (DD) stage 2) Detailed Design Stage (DTD) 3) Working Drawings (WD) or Good For Construction Drawings(GFC) 4) Shop Drawings (SHD) 5) As-Built Drawings (ABD) i. Design Development (DD) stage: It shall be sufficiently detailed to show all the main elements of the design and documents required for preparation of the Detailed Design stage drawings. It shall include, but not be limited to, the following ⮚ Report on compliance with the design criteria and all applicable codes and statutory regulations. ⮚ Submission of design manuals ⮚ Preliminary off site testing recommendation ⮚ References to the relevant design codes and standards ⮚ General arrangement of drawings, plans, elevations, and sections at suitable scale ⮚ Calculations and drawings for all structures. ⮚ Finishes and landscape schedule for the works ⮚ Design submission programme/schedule with approval schedule for completion of Project ⮚ Drawings/ reports of project site surveys in reference to Survey of India reference points and other field investigations ⮚ 3D renderings, visuals, and animations as required ⮚ Design simulation, if required. Design manual: Contractor shall submit the complete process, timelines/schedules for all the deliverables to be provided to complete the detailed design ii. Detailed Design (DD) stage submission shall be a coherent and complete set of documents properly consolidated and indexed and shall fully describe the proposed design. All disciplines of works which are inter-dependent shall be submitted together in a single submission. In particular, and where appropriate, it shall include, but not be limited to the following -