Design Builder's Representative Sample Clauses

Design Builder's Representative. Design-Builder shall designate, by written notice to Owner on or before the Notice to Proceed, an individual (“Project Manager”) who shall be authorized to act on behalf of Design-Builder, with whom Owner may consult at all reasonable times, who shall have full supervision over the completion of the Work, who shall be designated to act as the primary point of contact with Owner regarding all matters relating to the Work, and who shall have full authority to bind Design-Builder except to the extent such authority is limited as described in such notice. If the Project Manager’s authority is limited, the notice will identify such persons within Design-Builder’s organization who do have full authority to bind Design- Builder for all purposes under the Contract Documents. Design-Builder may, at any time by written notice to Owner, change the persons, if any, previously identified as having authority beyond that of the Project Manager. Any changes in the Project Manager shall require Owner’s prior written approval.
View SourceView Similar (3)
Design Builder's Representative. Design Builderdesignates the individual listed below as its Design Builder's Representative to provide direct interface with Owner with respect to Design Builder's responsibilities:
View SourceView Similar (3)
Design Builder's Representative. The Design-Builder shall designate a person who shall be the Design-Builder's authorized representative. The Design-Builder's Representative is: ▇▇. ▇▇▇▇ ▇▇▇▇▇.
View SourceView Similar (3)
Design Builder's Representative. 3.2.1 Design-Builder’s Representative shall be responsible for providing Design-Builder-supplied information and approvals in a timely manner to permit Design-Build Subcontractor to fulfill its obligations under the Contract Documents.
View SourceView Similar (2)
Design Builder's Representative. Design Builderdesignates the individual listed below as its Design Builder's Representative to provide direct interface with Owner with respect to Design Builder's responsibilities: ▇▇▇▇▇▇▇ ▇▇▇▇▇▇, Design Builder's Project Manager. Exhibit C- Project Assignment Page 3 of 4 Exhibit C-1 – List of Contract Documents Page 1 of 1 1. Timely completion of the project is contingent upon receipt of BPS Building Official approval to begin new construction activities with the issuance of building permits to support the project completion schedules outlined in the Design Builder’s proposal. 2. It is understood that any additional work required by the BPS Building Official, not specifically identified in the GMP proposal, is excluded. 3. Removal of hazardous materials, if encountered, is excluded. 4. A project contingency allowance of $15,000.00, without fee markup, is included. Atlantis Electrical Systems LLC 1. Building 34 Conduit between top and bottom floors. 2. Installation of SCSC provided wall mount cabinet on 3/4” plywood in building 34 and building 9. 3. Install 3’ sleeves in new cabinets with plastic screw on bushings. 4. Install additional sleeves in existing CER, and CCs where necessary. 5. Install surge suppression duplex receptacles in new cabinets. 6. Install 3/4” conduit in buildings with exposed ceilings. 7. Install pull strings in all conduit. 8. Provide as built drawings with all conduit pathways.
View Source
Design Builder's Representative. Design Builderdesignates the individual listed below as its Design Builder's Representative to provide direct interface with Owner with respect to Design Builder's responsibilities: ▇▇▇▇ ▇▇▇▇▇▇▇, Design Builder's Project Manager. Exhibit C- Project Assignment Page 3 of 4 Exhibit C-1 – List of Contract Documents Page 1 of 1 1. GMP based on removing the existing walk-in cooler/freezer in the Culinary Lab and installing a prefabricated cooler and freezer from Polar King. 2. GMP based on installation taking place in summer 2019 while classroom and lab are unoccupied. 3. Preconstruction fees are not included in the GMP total. $145,159.81 (One Hundred Forty-Five Thousand One Hundred Fifty-Nine Dollars and Eighty-One Cents) A TOTAL ALL DIVISIONS 87,994.12 F TOTAL COST OF WORK 118,334.73 K TOTAL PROPOSED GMP (F+G+H+l+J) 145,159.81 MHS Culinary Renovation – Melbourne, FL GENERAL CLARIFICATIONS & QUALIFICATIONS GENERAL NOTES 1. The following items are included: a. Project management and supervision b. Jobsite safety equipment c. Temporary sanitary facilities and clean-up d. Hoisting e. Temporary sidewalk staging f. Blueprints, as-built drawings, close-out documents g. Surveying, soil testing, concrete testing h. Taxes i. Design fees j. 12 month warranty starting from the date of substantial completion k. Payment and performance bonds l. Builder’s risk insurance 2. The following items are not included: a. Boundary survey and benchmark b. Field office/trailer c. Impact fees or building permit fees d. Utility service provider meter and connection fees e. Threshold inspections f. Third party testing and inspections including building envelope, roofing/flashing, and mold/mildew inspections g. Radon mitigation systems h. Fixtures, furnishings, and equipment unless otherwise noted in this document i. Work resulting from code interpretations by the Authorities Having Jurisdiction (AHJ’s) which were not contemplated in this contract 3. Contractor assumes the existing kitchen will not be used at any point in the Summer of 2019. 4. All allowance numbers are inclusive of all material, sales tax, delivery, stocking, labor and equipment for 1. The following items are included: a. Remove existing walk-in cooler/freezer and all components. b. Sawcut opening in exterior wall for new cooler/freezer entrance. c. Remove existing condenser and pad. d. Remove palm tree ▇▇▇▇▇ 2. The following items are not included: a. Storage or removal of any other equipment 1. The following items are i...
View Source
Design Builder's Representative. Design Builderdesignates the individual listed below as its Design Builder's Representative to provide direct interface with Owner with respect to Design Builder's responsibilities: ▇▇▇▇ ▇▇▇▇▇▇▇, Design Builder's Project Manager. Exhibit C- Project Assignment Page 3 of 4 ‌ 1. Board Approval- 7/30/10 2. NTP- 7/31/20 3. Submittals – 7/31/20 – 8/14/20 4. Tank Procurement- 8/14/20 - 12/04/20, see qualifications sheet for further information.
View Source
Design Builder's Representative. 7.3.1 Design-Builder shall ensure that the Design-Builder’s Representative is present at the Site at all times reasonably necessary to ensure that Design-Builder is complying with its obligations under this Agreement. 7.3.2 Design-Builder will be deemed to have received any direction given to the Design-Builder’s Representative. 7.3.3 Design-Builder may replace the Design-Builder’s Representative in accordance with Section 7.4 of this Agreement.
View Source

Related to Design Builder's Representative

  • Owner’s Representative Owner designates the individual listed below as its Owner’s Representative to provide direct interface with Construction Manager with respect to Owner’s responsibilities: ▇▇▇▇▇▇▇ ▇▇▇▇▇▇-▇▇▇▇▇▇, Owner’s Project Manager.

  • Contractor’s Representative Contractor hereby designates [***INSERT NAME OR TITLE***], or his or her designee, to act as its representative for the performance of this Agreement (“Contractor’s Representative”). Contractor’s Representative shall have full authority to represent and act on behalf of the Contractor for all purposes under this Agreement. The Contractor’s Representative shall supervise and direct the Services, using his best skill and attention, and shall be responsible for all means, methods, techniques, sequences and procedures and for the satisfactory coordination of all portions of the Services under this Agreement.

  • Owner’s Representatives 9.1.1 Owner designates the individual listed below as its Senior Representative (“Owner Senior Representative”), which individual has the authority and responsibility for avoiding and resolving disputes under Section 10.2 of the General Conditions: 9.1.2 Owner designates the individual listed below as its Owner’s Representative, which individual has the authority and responsibility set forth in Section 3.3 of the General Conditions:

  • Sellers’ Representative By execution of this Agreement, the Sellers hereby irrevocably and unconditionally appoint Nephron Pharmaceuticals Corporation as the Sellers’ Representative of all Sellers, as the attorney-in-fact for and on behalf of each such Seller, and irrevocably agree that the taking by the Sellers’ Representative of any and all actions and the making of any decisions required or permitted to be taken by it or by a Seller under this Agreement or any Transaction Documents to which the Sellers are a party are hereby authorized and approved in all respects, including without limitation the exercise of the power to (i) receive from Buyer and disburse to Sellers any payments constituting any part of the Purchase Price and receive and disburse from and to any Party or any Third Party which may be contemplated to be made under the Transaction Documents, (ii) agree to, negotiate, enter into settlements and compromises of and comply with orders of courts with respect to any indemnification claims or disputes, (iii) resolve any indemnification claims or disputes, and (iv) take all actions necessary in the judgment of the Sellers’ Representative for the accomplishment of the other terms, conditions and limitations of this Agreement and the Transaction Documents. The Sellers’ Representative has authority and power to act on behalf of the Sellers with respect to this Agreement and the other Transaction Documents and the disposition, settlement or other handling of all indemnification claims, rights or obligations arising from and taken pursuant to this Agreement and the other Transaction Documents. The Sellers irrevocably agree to be bound by all and any such actions taken by the Sellers’ Representative in connection with this Agreement and the other Transaction Documents to which the Sellers are a party, and Sellers and Buyer shall only be required to acknowledge or act upon written communication signed by the Sellers’ Representative. Each Seller agrees that he, she or it has not, and will not, threaten or commence or join any legal action, which term includes, without limitation, any demand for arbitration proceedings and any complaint to any foreign, federal, state or local agency, court or other tribunal, to assert any claim against the Sellers’ Representative or its advisors for acting in such capacity with respect to this Agreement or the other Transaction Documents. If any Seller commences or joins any such prohibited legal action against the Sellers’ Representative, such Seller agrees to promptly indemnify Sellers’ Representative and advisers of Sellers’ Representative for all losses, liabilities, reasonable costs or expenses, including without limitation all reasonable fees, disbursements and other charges of attorneys incurred by Sellers’ Representative and/or its advisers in defending such action as well as any monetary judgment obtained against the Sellers’ Representative in such action. The Sellers’ Representative may resign at any time upon 30 days written notice to the Sellers.

  • Project Representative City shall designate a Project Manager to represent City in coordinating this Project with Consulting Engineer/Architect, with authority to transmit instructions and define policies and decisions of City.