Designated Locations Sample Clauses

The 'Designated Locations' clause identifies specific places where certain activities, obligations, or rights under the agreement are to be performed or apply. For example, it may specify the address where goods must be delivered, services rendered, or meetings held. By clearly defining these locations, the clause helps prevent confusion or disputes about where contractual duties are to be fulfilled, ensuring clarity and logistical certainty for all parties involved.
POPULAR SAMPLE Copied 1 times
Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (“Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. After installation, any subsequent changes to the Deployment Plan (“Reinstalls”) will incur a charge for ▇▇▇▇▇’s then- current list price for Reinstalls, as listed in the then-current Reinstall policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware.
Designated Locations. The Designated Locations are as follows: (a) Albury Wodonga Health (Wodonga Hospital only) (b) Bairnsdale Regional Health Service; (c) Central Gippsland Health Service; (d) Echuca Regional Health; (e) Gippsland Southern Health Service; (f) Goulburn Valley Health (g) Horsham Hospital; (h) Mildura Base Public Hospital; (i) Portland District Health; (j) South West Healthcare; (k) Swan Hill District Health; (l) Western District Health Service; (m) Bacchus ▇▇▇▇▇ Hospital; (n) Bass Coast Health; (o) North East Health Wangaratta; and (p) West Gippsland Healthcare Group
Designated Locations. State Street and the Customer agree that each will engage or retain the services of trained personnel to enable both parties to perform their respective obligations under this Agreement. State Street agrees to use commercially reasonable efforts to maintain the System so that it remains serviceable, provided, however, that State Street does not guarantee or assure uninterrupted remote access use of the System.
Designated Locations. Prior to performing the physical installation of the Units, Flock shall advise Customer on the location and positioning of the Units for optimal license plate image capture, as conditions and location allow. While Flock will provide advice regarding the location of positioning of such Units, Customer will have the ultimate decision regarding the location, position, and angle of the Units (each Unit location so designated by Customer, a “Designated Location”). Due to the fact that Customer selects the Designated Location, Flock shall have no liability to Customer resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations. After an installation plan with Designated Locations and equipment has been agreed upon by both Flock and the Customer, any subsequent changes to the installation plan driven by Customer's request will incur a $250 charge in addition to any equipment charges. These changes include but are not limited to camera re-positioning, adjusting of camera mounting, re-angling, changes to heights of poles, and removing foliage.
Designated Locations. The Company shall keep the Pledged Spare Parts at one or more of the Designated Locations and, except as otherwise permitted under Sections 3.02(a), 3.02(b)(1) or 3.02(b)(3) of this Mortgage, shall not suffer or permit any Pledged Spare Part to be stored at any other location. The Company shall not suffer or permit any Pledged Spare Parts at any Designated Location to be commingled with any Excluded Parts (it being acknowledged that, so long as the Company complies with Section 3.02(d)(1) hereof, Excluded Parts which are stored on a separate shelf from Pledged Spare Parts and in a separate storage bin or other storage unit from any Pledged Spare Parts shall not be considered as having been commingled with Pledged Spare Parts even though such Excluded Parts are present at the same Designated Location as the Pledged Spare Parts). The Company shall ensure that each Designated Location is adequate for warehousing and storing the Pledged Spare Parts, and at all times that the Current Market Value of Rotables included in the Pledged Spare Parts which are stored at a Secure Location is no less than eighty percent (80%) of the Current Market Value of all the Rotables included within the Collateral. The Company shall obtain from each landlord, mortgagee or other Person from time to time holding title to or a security or leasehold interest in a Designated Location a waiver in a form reasonably satisfactory to the Security Trustee of any right or interest in the Pledged Spare Parts stored at such Designated Location. The Company shall add as a Designated Location (in accordance with this Section 3.02(b)(2)) any location in the United States where Pledged Spare Parts may be stored by the Company from time to time. Upon adding a location that is to become a Designated Location, the Company will furnish to the Security Trustee the following: (i) a Supplemental Mortgage duly executed by the Company, identifying each location that is to become a Designated Location and specifically subjecting the Pledged Spare Parts at such location to the Lien of this Mortgage; (ii) an Opinion of Counsel, dated the date of execution of said Supplemental Mortgage, stating that said Supplemental Mortgage has been duly filed for recording in accordance with the provisions of the Federal Aviation Act, and either: (a) no other filing or recording is required in any other place within the United States in order to perfect the Lien of this Mortgage on the Pledged Spare Parts held at the Designa...
Designated Locations. Datec will manage the BSP WAN operations from its Corporate Head Office located in Waigani Drive, Port Moresby. In order for this to occur certain routers/switches and associated network equipment will be located at Datec Commercial in Confidence Page 24 May 2004 [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****]
Designated Locations. This Agreement shall be applicable to all Buyer's activities carried on at the location(s) set forth in Section 1 above and if the operations at any such locations are expanded or relocated to new locations then, at Seller's and Buyer's option, this Agreement shall be applicable at such locations ("Designated Locations(s)").
Designated Locations. For installation of Flock Hardware, prior to performing the physical installation of the Units, Flock shall advise Agency on the location and positioning of the Units for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and Designated Location discretion on location of Units. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due ignated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. The deployment plan will confirm the Designated Location. After installation, aReinstalls -current list price for Reinstalls, as listed in the then-current Reinstall Policy (available at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/reinstall-fee-schedule) and any equipment charges. These changes include but are not limited to camera re-positioning, adjusting of camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock Safety shall have full discretion on decision to reinstall Flock Hardware.
Designated Locations. Exhibit D.........Schedule of Countries Authorized for Domicile of Permitted Lessees MORTGAGE AND SECURITY AGREEMENT This MORTGAGE AND SECURITY AGREEMENT (as amended, modified, restated or otherwise supplemented from time to time in accordance with the terms hereof, this "Security Agreement") dated as of February 14, 2003 is made by Frontier Airlines, Inc., a Colorado corporation (the "Company") in favor of Wells Fargo Bank Northwest, N.A., acting solely in its capacity as Collateral Agent for the Bo▇▇▇, the Lenders and the Supplemental Guarantors (as such terms are defined in the Loan Agreement (as defined below)) and as directed by the Board and the Lenders (the "Collateral Agent").
Designated Locations. (i) Prior to any utilization or Disposition thereof that is permitted hereunder or under the Loan Agreement, the Pledged Ground Support Equipment, Pledged Flight Simulators and Pledged Tooling Inventory shall be maintained by or on behalf of the applicable Grantor at one or more of the locations specified in Schedule 2.1, except such Pledged Ground Support Equipment and Pledged Tooling Inventory may from time to time be temporarily relocated to other locations in order to perform ground support for aircraft operations or maintenance, repair and overhaul of aircraft and engines, respectively, provided that such Pledged Ground Support Equipment and Pledged Tooling Inventory must promptly be restored to one of the locations listed on Schedule 2.1 following such temporary relocation, and the nature of each Grantor’s interest in and to each such location (e.g., owner, leasehold, tenant) is and shall remain as described to the Collateral Agent pursuant to this Agreement. (ii) Each Grantor will promptly notify (in any event, within fifteen (15) days thereof) the Collateral Agent if any of the representations, warranties or agreements contained in the preceding sentence become inaccurate in any respect with respect to any of the Pledged Equipment and Pledged Tooling Inventory or the interest of the applicable Grantor therein.