Electrical Lines Sample Clauses

Electrical Lines. (a) Tenant may not install any electrical equipment that overloads the lines in the Demised Premises, the Building or the Real Estate or which will interfere with the use thereof by other tenants of the Building unless Landlord approves same in the Plans and Specifications or as provided for in Section 7.03 above. If Tenant makes such installation, Landlord may require Tenant, at Tenant’s sole cost and expense, to make whatever alterations and/or repairs are necessary and which are in compliance with the terms and conditions of all required insurance policies and all requirements of applicable governmental authorities. Tenant shall be responsible or liable for all damages anywhere in the Building or with respect to the Real Estate caused by any electrical overload attributable to Tenant. (b) At all times, Tenant shall provide access for Landlord to trench headers provided that Landlord’s work shall not prevent the conduct of Tenant’s business.
View SourceView Similar (3)
Electrical Lines. If the Tenant installs any electrical equipment that overloads the lines in the Building or the Demised Premises, Landlord may require Tenant to make whatever changes to such lines as may be necessary to render the lines in good order and repair and in compliance with all Insurance Requirements and applicable legal requirements.
View SourceView Similar (3)
Electrical Lines. Tenant may not install any electrical equipment that overloads the lines in the Demised Premises, the Building or the Property or which will interfere with the use thereof by other tenants of the Building unless Landlord approves same in the Plans and Specifications or as provided for in Section 7.03 above; provided, however, Landlord agrees to furnish electric service to the Demised Premises equal to the Electric Capacity. If Tenant makes such installation, Landlord may require Tenant, at Tenant’s sole cost and expense, to make whatever alterations and/or repairs are necessary and which are in compliance with the terms and conditions of all required insurance policies and all requirements of applicable governmental authorities. Tenant shall be responsible or liable for all damages anywhere in the Building caused by any electrical overload attributable to Tenant.
View SourceView Similar (2)
Electrical Lines. (a) Tenant may not install any electrical equipment that overloads the lines in the Demised Premises, the Building or the Real Estate or which will interfere with the use thereof by other tenants of the Building unless Landlord approves same in the Plans and Specifications or as provided for in Section 7.03 above. If Tenant makes such installation, Landlord may require Tenant, at Tenant's sole cost and expense, to make whatever alterations and/or repairs are necessary and which are in compliance with the terms and conditions of all required insurance policies and all requirements of applicable governmental authorities. Tenant shall be responsible or liable for all damages anywhere in the Building or with respect to the Real Estate caused by any electrical overload attributable to Tenant. (b) At all times, Tenant shall provide access for Landlord to trench headers provided that Landlord's work shall not prevent the conduct of Tenant's business and shall be conducted at such times and in a manner so as to minimize disruption of Tenant's operations.
View SourceView Similar (2)
Electrical Lines. Tenant may not install any electrical equipment that overloads the lines in the Demised Premises, the Building or the Real Estate or which will interfere with the use thereof by other tenants of the Building unless Landlord approves same in the Plans and Specifications or as provided for in Section 7.03 above. If Tenant makes such installation, Landlord may require Tenant, at Tenant’s sole cost and expense, to make whatever alterations and/or repairs are necessary and which are in compliance with the terms and conditions of all required insurance policies and all requirements of applicable governmental authorities. Tenant shall be responsible or liable for all damages anywhere in the Building caused by any electrical overload attributable to Tenant.
View SourceView Similar (2)
Electrical Lines. The IS auditors should verify whether: a) There is a separate dedicated electrical line for the computer equipment. b) Power supply to computer equipment is through UPS system only. c) The electrical wiring looks concealed and is not hanging from ceiling or nodes. d) The circuit breaker switches exist in locked condition only.
View Source
Electrical Lines. If the Tenant installs any electrical equipment that overloads the lines in the Demised Premises, Tenant shall make whatever changes to such lines as may be necessary to render the lines in good order and repair and in compliance with all Insurance Requirements and applicable legal requirements. All electrical work to the Demised Premises shall be performed by a licensed electrician. In the event that the electrical work to be performed by Tenant shall require the alteration, modification or repair of electrical equipment or lines servicing the Building, then, in such event, Tenant shall cause such electrical work to be performed by a licensed electrical contractor acceptable to Landlord.
View Source

Related to Electrical Lines

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Electrical Provide drawings for the following systems: .1 Lighting including circuiting and luminaire identification and switching. Also provide illuminance computer printout for all indoor typical indoor spaces and parking lots. .2 Convenience outlets and circuiting, special outlets and circuiting, television outlets, and power systems and equipment. Provide riser diagrams for all electrical systems including master clock, intercom, fire alarm, ITV, computer networking/telephone. Also, provide for emergency and normal power distribution. Provide luminaire schedule. .3 Panel schedule may be in preliminary form but circuitry must be included. .4 Applicable installation details. .5 General legend and list of abbreviations. .6 Voltage drop computation for all main feeders. .7 Short circuit analysis .8 Provide 1/2" scale floor plan and wall elevations for all electrical rooms.

  • Electrical connections In accordance with paragraph 5.11. However, if a rear position lamp is reciprocally incorporated with a direction- indicator, the electrical connection of the rear position lamp on the relevant side of the vehicle or the reciprocally incorporated part of it may be such that it is switched OFF during the entire period (both ON and OFF cycle) of activation of the direction-indicator lamp.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • Electrical Items All electrical items purchased under this Grant Agreement/Contract or used in the performance of approved and eligible grant-funded activities must meet all applicable Occupational Safety and Health Administration (OSHA) standards and regulations, and bear the appropriate listing from Underwriters Laboratory (UL), Factory Mutual Resource Corporation (FMRC), or National Electrical Manufacturers Association (NEMA).