Engineering Support Services Clause Samples

Engineering Support Services. Under an HSA or Statement of Work (SOW), and available only for PremiumPlus Programs as described in Sections 2.1.3 and 2.2.3 herein, NI can provide one or more of the following engineering consulting services.

Engineering Support Services. Boeing will, if requested by Customer, provide technical advisory assistance for any aircraft and Boeing Product (as defined in Part I of Exhibit C). Technical advisory assistance, provided from the Seattle area or at a base designated by Customer as appropriate, will include:

Engineering Support Services. 2.1 Boeing will, if requested by Customer, provide technical advisory assistance from the Seattle area or at a base designated by Customer as appropriate for any Aircraft or Boeing Product (as defined in Part 1 of Exhibit C of the AGTA). Technical advisory assistance provided will include: 2.1.1 Analysis of the information provided by Customer to determine the probable nature and cause of operational problems and suggestion of possible solutions. 2.1.2 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory schedule reliability and the suggestion of possible solutions. 2.1.3 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory maintenance costs and the suggestion of possible solutions. 2.1.4 Analysis and commentary on Customer's engineering releases relating to structural repairs not covered by Boeing's Structural Repair Manual including those repairs requiring advanced composite structure design. 2.1.5 Analysis and commentary on Customer's engineering proposals for changes in, or replacement of, systems, parts, accessories or equipment manufactured to Boeing's detailed design. Boeing will not analyze or comment on any major structural change unless Customer's request for such analysis and comment includes complete detailed drawings, substantiating information (including any information required by applicable government agencies), all stress or other appropriate analyses, and a specific statement from Customer of the substance of the review and the response requested. 2.1.6 One (1) evaluation of Customer's technical facilities, tools and equipment for servicing and maintaining 787 aircraft, recommendation of changes where necessary and assistance in the formulation of an initial maintenance plan for the introduction of the first Aircraft into service. 2.1.7 Assistance with the analysis and preparation of performance data to be used in establishing operating practices and policies for Customer's operation of Aircraft. 2.1.9 Assistance with interpretation of the minimum equipment list, the definition of the configuration deviation list and the analysis of individual Aircraft performance.

Engineering Support Services. During the Transitional Phase, if any, and Initial Manufacturing Phase (but only if at such time the Exclusive License remains exclusive), E-C will provide up to 4000 man-hours of engineering support services in scope mutually agreed by the Parties (“Engineering Support Services”), of which a minimum of 2000 man-hours will be applied to an IMP project. During the Initial Manufacturing Phase, as part of the Engineering Support Services, E-C will provide D-R (i) with all trade secrets, designs, drawings, graphs, reports, analyses, specifications, processes, techniques, formulae, systems, methods, technical data, information, tools, inventions (whether or not patentable or reduced to practice), works of authorship and other similar materials, and other writings embodying the Licensed IP (the foregoing in a documented or electronic form, “Know-How”), and (ii) all other non-documented Know-How, in each case, as is necessary for D-R to exercise the rights granted with respect to the Licensed IP. After the conclusion of the Initial Manufacturing Phase, E-C will, for so long as the Exclusive License remains exclusive, continue providing up to five hundred (500 man-hours of Engineering Support Services in scope mutually agreed by the Parties on an annual basis at no additional cost to D-R, with such obligations pro-rated in the event that the Exclusive License becomes non-exclusive mid-year. Regardless of whether the Exclusive License is in effect, additional Engineering Support Services may be mutually agreed by the Parties at a rate of $150 per man-hour, which will be upwardly adjusted on an annual basis beginning on the first anniversary of the Execution Date at a rate of two percent (2%) per calendar year. Such Engineering Support Services may include engineering and field warranty support for the E-C Products included in each Combined System on the terms stipulated in D-R’s contract with the Customer purchasing the Combined System and in D-R’s corresponding purchase contract with E-C.

Engineering Support Services. Throughout the contract term, TKE will provide the following services in support of MSWD’s Engineering Department: • Prepare and maintain a project schedule identifying the critical path for expeditious project completion. • Conduct and attend design kick-off meeting with all stakeholders. • Schedule and conduct Project Development Team (PDT) meetings and other necessary meetings; prepare agendas and minutes; and distribute to all applicable entities (not just attendees) within three (3) working days. • Schedule, facilitate, and attend public meetings, as necessary. • Provide progress reports monthly or as deemed required. • Compose all correspondences to keep the project on schedule. • Check all contracts documents to ensure compliance with the MSWD standards and and funding requirements, as required. • Prepare all submittals in accordance agency requirements, as required. • Prepare reimbursement requests and invoices to funding agencies, as required. • Prepare agreements and Purchase Orders. • Coordinate with and prepare inter-agency agreements. • Coordinate with funding agencies and prepare reports, update funding reports, and grant applications as necessary for project funding. • Prepare project update write-ups. • Prepare project estimates and budgets. • Issue all necessary Notices to Proceed (NTP). • Review and process all invoices (MSWD staff will approve). • Compose Requests for Proposal (RFP), Notices Inviting Proposals (NIP), and Scopes of Services to retain other related design services, construction, such as Design Review, Surveying, Inspection, Geotechnical, Material Testing, etc.; coordinate and schedule these services; and review proposals as necessary. • Maintain all project files in accordance with MSWD format. • Facilitate, coordinate, and oversee the ongoing daily actions required to completely provide the full level of intended service and ensure that the project meets all applicable Federal, State, and local requirements. • Oversee and ensure that all measures of the specific project’s scope of services are completed in a timely and professional manner with an emphasis on providing MSWD with a high- quality project. • Act as a liaison between MSWD and all project stakeholders on order to accomplish the full project services intended by MSWD. • Ensure that all appropriate communication, correspondence, and reports are completed on an ongoing basis in a timely manner to the satisfaction of the MSWD. • Prepare MSWD Broad of Directors staf...

Engineering Support Services. 2.1 Boeing will, if requested by Customer, provide technical advisory assistance from the Seattle area or at a base designated by Customer as appropriate for any Aircraft or Boeing Product (as defined in Part 1 of Exhibit C of the AGTA). Technical advisory assistance, provided, will include: 2.1.1 Analysis of the information provided by Customer to determine the probable nature and cause of operational problems and suggestion of possible solutions. 2.1.2 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory schedule reliability and the suggestion of possible solutions.

Engineering Support Services. 2.1 Boeing will, if requested by Customer, provide limited (as determined by Boeing) technical advisory assistance from the Puget Sound area or from an alternate location, at Boeing’s sole discretion, for any Aircraft or Boeing Product (as defined in Part 1 of Exhibit C of the AGTA). Technical advisory assistance, provided, will include: 2.1.1 Analysis of the information provided by Customer to determine the probable nature and cause of operational problems and a suggestion of possible solutions. 2.1.2 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory schedule reliability and a suggestion of possible solutions. 2.1.3 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory maintenance costs and a suggestion of possible solutions. 2.1.4 Analysis and commentary on Customer’s engineering releases relating to structural repairs not covered by Boeing’s Structural Repair Manual including those repairs requiring advanced composite structure design. 2.1.5 Analysis and commentary on Customer’s engineering proposals for changes in, or replacement of, systems, parts, accessories or equipment manufactured to Boeing’s detailed design. Boeing will not analyze or comment on any major structural change unless Customer’s request for such analysis and comment includes complete detailed drawings, substantiating information (including any information required by applicable government agencies), all stress or other appropriate analyses, and a specific statement from Customer of the substance of the review and the response requested.

Engineering Support Services. Solectron shall provide Engineering Support Services which shall include, without limitation, the following: A. Designated Component Engineering liaison to interact with Zhone's designers. Such liaison will, among other things, assist in the selection of Components meeting design requirements and coordinate Component evaluations and qualifications. B. Support Zhone's quick turn prototype requirements. C. Perform Beta Pilot production checkout. D. Provide seamless transfer from prototype/pilot environment to Solectron's volume production sites. Such services will be provided at mutually agreed pricing and, except as provided otherwise herein, billed in the period supplied. Designated resources will be billed on a monthly basis.

Engineering Support Services. 2.1 Boeing will, if requested by Customer, provide technical advisory assistance from the Seattle area or at a base designated by Customer as appropriate for any Aircraft or Boeing Product (as defined in Part 1 of Exhibit C of the AGTA). Technical advisory assistance provided will include: 2.1.1 Analysis of the information provided by Customer to determine the probable nature and cause of operational problems and suggestion of possible solutions. 2.1.2 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory schedule reliability and the suggestion of possible solutions. P.A. No. 3860 CS1 Rev.: 11/09/04 2.1.3 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory maintenance costs and the suggestion of possible solutions. 2.1.4 Analysis and commentary on Customer’s engineering releases relating to structural repairs not covered by Boeing’s Structural Repair Manual including those repairs requiring advanced composite structure design. 2.1.5 Analysis and commentary on Customer’s engineering proposals for changes in, or replacement of, systems, parts, accessories or equipment manufactured to Boeing’s detailed design. Boeing will not analyze or comment on any major structural change unless Customer’s request for such analysis and comment includes complete detailed drawings, substantiating information (including any information required by applicable government agencies), all stress or other appropriate analyses, and a specific statement from Customer of the substance of the review and the response requested. 2.1.6 evaluation of Customer’s technical facilities, tools and equipment for servicing and maintaining 787 aircraft, recommendation of changes where necessary and assistance in the formulation of an initial maintenance plan for the introduction of the first Aircraft into service. 2.1.7 Assistance with the analysis and preparation of performance data to be used in establishing operating practices and policies for Customer’s operation of Aircraft.