FUGITIVE DUST EMISSION CONTROL Sample Clauses

FUGITIVE DUST EMISSION CONTROL. The A-E shall comply with the requirements of the OC Waste & Recycling Fugitive Dust Emission Control Plan in conformance with the SCAQMD Rule 403. The A-E shall also notify OC Waste & Recycling any condition that could lead to noncompliance with the permit requirements. The A-E shall submit a Dust Control Plan to be received and approved by the County. If the A-E fails or refuses to correct the noncompliance immediately, OC Waste & Recycling may terminate the A-E’s right to proceed with the work, by written notice to the A-E. In such event, OC Waste & Recycling may take over the work and prosecute the same to completion, by contract or otherwise at the A-E’s expense, and may take possession of and utilize in completing the work such materials, appliances, and plants as may be on the site of the work and necessary therefore. Whether or not the A-E’s right to proceed with the work is terminated, the A-E and the A-E’s Sureties shall be liable for any damage to the County resulting from the A-E’s refusal or failure to complete the work within the specified time. The A-E shall not be entitled to any time extensions or compensation for any cost due to any such action as a result of the A-E’s failure to comply with those provisions of the OC Waste & Recycling Fugitive Dust Emission Control Plan within the A-E’s control. The A-E shall be responsible for ensuring that all sub A-E(s) comply with the provisions of this section. The A-E shall be liable for any action or fine imposed by the SCAQMD on those incidents of noncompliance that are within the A-E’s area of responsibility. OC Waste & Recycling’s Fugitive Dust Emission Control Plan (SCAQMD Rule 403-Fugitive Dust-April 1993) is available for review by the A-E in the offices of the OC Waste & Recycling Project Manager.
View SourceView Similar (15)
FUGITIVE DUST EMISSION CONTROL. The Contractor shall comply with the requirements of the County Fugitive Dust Emission Control Plan in conformance with the SCAQMD Rule 403. The Contractor shall also notify County of any condition that could lead to noncompliance with the permit requirements. The Contractor shall submit a Dust Control Plan to be received and approved by the County. If the Contractor fails or refuses to correct the noncompliance immediately, County may terminate the Contractor’s right to proceed with the work, by written notice to the Contractor. In such event, County may take over the work and prosecute the same to completion, by Contract or otherwise at the Contractor’s expense, and may take possession of and utilize in completing the work such materials, appliances, and plants as may be on the site of the work and necessary therefore. Whether or not the Contractor’s right to proceed with the work is terminated, the Contractor and the Contractor’s Sureties shall be liable for any damage to the County resulting from the Contractor’s refusal or failure to complete the work within the specified time. The Contractor shall not be entitled to any time extensions or compensation for any cost due to any such action as a result of the Contractor’s failure to comply with those provisions of the County Fugitive Dust Emission Control Plan within the Contractor’s control. The Contractor shall be responsible for ensuring that all Subcontractor(s) comply with the provisions of this section. The Contractor shall be liable for any action or fine imposed by the SCAQMD on those incidents of noncompliance that are within the Contractor’s area of responsibility. The County’s Fugitive Dust Emission Control Plan (SCAQMD Rule 403-Fugitive Dust-April 1993) is available for Contractor’s review in the offices of the Contract Administrator.
View SourceView Similar (14)
FUGITIVE DUST EMISSION CONTROL. Contractor shall comply with SCAQMD Rule 403 including, if applicable to prepare and submit to County and for acceptance by SCAQMD a Fugitive Dust Emission Control Plan, as required for Project work. Contractor shall also notify OWNER of any condition that could lead to noncompliance with the Rule 403 requirements. If a Fugitive Dust Emissions Control Plan is required pursuant to Rule 403, Contractor may not conduct any activities governed by SCAQMD Rule 403 until OWNER has accepted Contractor's Plan and the Plan is accepted by SCAQMD. If Contractor fails or refuses to immediately correct any noncompliance with the provisions of this Section, OWNER may terminate Contractor's right to proceed with the work and OWNER may exercise its rights under the "TERMINATION FOR CAUSE" Section of these General Conditions. Whether or not Contractor's right to proceed with the work is terminated, Contractor and the Contractor's sureties shall be liable for any damage to the OWNER resulting from Contractor's refusal or failure to complete the work within the specified time. Contractor shall not be entitled to any time extensions or compensation for any cost due to any such action as a result of Contractor's failure to comply with the provisions of the accepted Fugitive Dust Emission Control Plan. Contractor shall be responsible for ensuring that all Subcontractor(s) comply with the provisions of this Section. Contractor shall be liable for any action or fine imposed by the SCAQMD on those incidents of noncompliance that are within the Contractor's area of responsibility.
View SourceView Similar (13)
FUGITIVE DUST EMISSION CONTROL. The Contractor shall comply with the requirements of the OC Waste & Recycling Fugitive Dust Emission Control Plan in conformance with the SCAQMD Rule
View SourceView Similar (2)
FUGITIVE DUST EMISSION CONTROL. The Contractor shall comply with the requirements of the OC Waste & Recycling Fugitive Dust Emission Control Plan in conformance with the SCAQMD Rule 403. The Contractor shall also notify OC Waste & Recycling of any condition that could lead to noncompliance with the permit requirements. The Contractor shall submit a Dust Control Plan to be received and approved by the County. If the Contractor fails or refuses to correct the noncompliance immediately, OC Waste & Recycling may terminate the Contractor’s right to proceed with the work, by written notice to the Contractor. In such event, OC Waste & Recycling may take over the work and prosecute the same to completion, by contract or otherwise at the Contractor’s expense, and may take possession of and utilize in completing the work such materials, appliances, and plants as may be on the site of the work and necessary therefore. Whether or not the Contractor’s right to proceed with the work is terminated, the Contractor and the Contractor’s Sureties shall be liable for any damage to the County resulting from the Contractor’s refusal or failure to complete the work within the specified time. The Contractor shall not be entitled to any time extensions or compensation for any cost due to any such action as a result of the Contractor’s failure to comply with those provisions of the OC Waste & Recycling Fugitive Dust Emission Control Plan within the Contractor’s control. The Contractor shall be responsible for ensuring that all subcontractor(s) comply with the provisions of this section. The Contractor shall be liable for any action or fine imposed by the SCAQMD on those incidents of noncompliance that are within the Contractor’s area of responsibility. OC Waste & Recycling’s Fugitive Dust Emission Control Plan (SCAQMD Rule 403-Fugitive Dust- April 1993) is available for review by the Contractor in the offices of the OC Waste & Recycling Project Manager.
View SourceView Similar (2)
FUGITIVE DUST EMISSION CONTROL. D-BE shall comply with SCAQMD Rule 403 including, if applicable to prepare and submit to County and for acceptance by SCAQMD a Fugitive Dust Emission Control Plan, as required for Project work. D-BE shall also notify Owner of any condition that could lead to noncompliance with the Rule 403 requirements. If a Fugitive Dust Emissions Control Plan is required pursuant to Rule 403, Contractor may not conduct any activities governed by SCAQMD Rule 403 until Owner has accepted Contractor's Plan and the Plan is accepted by SCAQMD. If D-BE fails or refuses to immediately correct any noncompliance with the provisions of this Section, Owner may terminate D-BE's right to proceed with the work and Owner may exercise its rights under the "Termination for Cause" Section of these General Conditions. Whether or not D-BE's right to proceed with the work is terminated, D-BE and the D-BE's sureties shall be liable for any damage to the Owner resulting from D-BE's refusal or failure to complete the work within the specified time. D-BE shall not be entitled to any time extensions or compensation for any cost due to any such action as a result of D-BE's failure to comply with the provisions of the accepted Fugitive Dust Emission Control Plan. D-BE shall be responsible for ensuring that all Subcontractor(s) comply with the provisions of this Section. D-BE shall be liable for any action or fine imposed by the SCAQMD on those incidents of noncompliance that are within the D-BE's area of responsibility.
View SourceView Similar (2)

Related to FUGITIVE DUST EMISSION CONTROL

  • Erosion Control a. The Purchaser shall construct slash and debris erosion barriers, dips, water bars or ditches in skid trails and landings as directed by the Forest Officer. b. The kinds and frequency of erosion control structures shall be adjusted to soil types, topography and climatic conditions as directed by the Forest Officer. c. The Purchaser is required to recontour any excavated skid trails, and provide for effective erosion control in the trail location as directed by the Forest Officer. d. Erosion control work shall commence as soon as skidding is completed on each skid trail or landing, and must be kept current with unit operations. e. Erosion control work shall be completed and approved by the Forest Officer in unfinished units before operations cease for inactive periods including heavy winter snowfall, spring breakup and restricted dates. f. All erosion control work in each unit shall be completed prior to notification pursuant to Section VII.M.7.

  • Interconnection Customer Compensation for Actions During Emergency Condition The CAISO shall compensate the Interconnection Customer in accordance with the CAISO Tariff for its provision of real and reactive power and other Emergency Condition services that the Interconnection Customer provides to support the CAISO Controlled Grid during an Emergency Condition in accordance with Article 11.6.

  • System Access Control Data processing systems used to provide the Cloud Service must be prevented from being used without authorization.

  • Completion of Concrete Pours and Emergency Work (a) Except as provided in this sub-clause an Employee shall nor work or be required to work in the rain. (b) Employees shall not be required to start a concrete pour in Inclement Weather. (c) Where a concrete pour has been commenced prior to the commencement of a period of Inclement Weather Employees may be required to complete such concrete pour to a practical stage and for such work shall be paid at the rate of double time calculated to the next hour, and in the case of wet weather shall be provided with adequate wet weather gear. (d) If an Employee’s clothes become wet as a result of working in the rain during a concrete pour the Employee shall, unless the Employee has a change of dry working clothes available, be allowed to go home without loss of pay. (e) The provisions of clauses 32.7(c) and 32.7(d) hereof shall also apply in the case of emergency work where the Employees concerned and their delegates agree that the work is of an emergency nature and can start and/or proceed.

  • Access Control Supplier will maintain an appropriate access control policy that is designed to restrict access to Accenture Data and Supplier assets to authorized Personnel. Supplier will require that all accounts have complex passwords that contain letters, numbers, and special characters, be changed at least every 90 days, and have a minimum length of 8 characters.