Installation of Artwork Clause Samples

The 'Installation of Artwork' clause defines the responsibilities and procedures for placing and securing artwork at a designated location. It typically outlines who is responsible for transporting, installing, and ensuring the artwork is properly mounted or displayed, and may specify requirements such as timing, safety standards, or coordination with venue staff. This clause ensures that both parties understand their obligations during the installation process, minimizing the risk of damage, delays, or misunderstandings.
POPULAR SAMPLE Copied 1 times
Installation of Artwork. MOA shall work with the Village on infrastructure and installation of the Artwork. MOA will be responsible for delivery and installation oversight of artwork to the proposed sites. The Village will be responsible for site preparation and installation assistance of artworks in accordance with the artists specifications. (Appendix B)
Installation of Artwork. (a) Prohibition against Installation or Integration of Works of Visual Art on Premises. Lessee shall not permit the installation or integration on or in the Premises of any "work of visual art," as that term is defined in the Visual Artists Rights Act of 1990, as now existing or as later amended, if the removal of such artwork is reasonably likely to result in its distortion, mutilation, modification or destruction unless ▇▇▇▇▇▇ delivers to City an executed waiver of the creator’s right of integrity regarding such art work, for the benefit of City and its successors and assigns, in a form that satisfies both City and the requirements of 17 U.S.C. section106A(e), as the same now exists or is hereafter modified. (b) ▇▇▇▇▇▇’s Indemnification of City against Liability under Visual Artists Rights Act of 1990. Lessee shall protect, defend, and hold City harmless from and against any and all claims, suits, actions or causes of action, damages and expenses (including attorneys’ fees and costs) arising as a consequence of (a) the installation or integration of any work of visual art on or into the Premises; or (b) the destruction, distortion, mutilation or other modification of art work that results by reason of its removal; or (c) any breach of subsection (a) of this Section; or (d) any violation of the Visual Artists Rights Act of 1990, as now existing or hereafter amended, by Lessee or any of its officers, employees or agents. This indemnification obligation shall exist regardless of whether City or any other person employed by City has knowledge of such installation, integration, or removal or has consented to any such action or is not required to give prior consent to any such action. The indemnification obligation of this subsection shall survive the expiration or earlier termination of this Lease.
Installation of Artwork. ARTIST shall install the ARTWORK and shall be responsible for the repair of any damage to the ARTWORK which may occur during delivery or installation. The ARTWORK shall be installed at the site designated and prepared by CITY. CITY shall be responsible for site preparation, and engineering, if required. ARTIST shall provide CITY with specifications for installation within sixty (60) days after execution of this Agreement.
Installation of Artwork. $5,000.00 shall be due to Artist within thirty (30) days of upon Installation of Artwork, which shall be defined as: a. Complete installation of the completed Mural, as confirmed by City and Owner; and b. Final inspection and written approval of the installation of the Mural by City and Owner.
Installation of Artwork. Artist shall coordinate with all applicable Stakeholders to install the Artwork, as well as all associated lighting and footings, at the Site. To be completed with road construction, anticipated in 2027 $5,000.00

Related to Installation of Artwork

  • Installation of Equipment You represent that there are no legal, contractual or similar restrictions on the installation of the Equipment in the location(s) you have authorized. It is your responsibility to ensure compliance with all applicable building codes, zoning ordinances, homeowners’ association rules, covenants, conditions, and restrictions related to the Service, to pay any fees or other charges, and to obtain any permits or authorizations necessary for the installation or use of the Service (collectively "Legal Requirements"). You are solely responsible for any fines or similar charges for violation of any applicable Legal Requirements. You acknowledge and agree that Viasat or its designated service provider will be required to access your premises and computer to install and maintain the Equipment, including, without limitation, the antenna and its components. Standard Equipment installations performed by Viasat-authorized installers include: (i) installation of the antenna to an outside wall or sloped roof; (ii) travel to and from your Service location within 50 miles of the installer’s office; (iii) cable routed through one exterior wall and one interior wall or floor; (iv) connection of the antenna to the modem using up to 150 feet of cable; (v) connection of the modem to one computer using up to 7 feet of cable; and (vi) required mounting and cabling hardware. Any different or additional installation services or hardware are non-standard and may result in additional charges to be agreed upon between you and the installer. All installations include attaching the Equipment to your computer, installing software on your computer and configuring your computer to optimize the performance of the Internet Service. You confirm that you have reviewed the installation plan and agreed to any associated charges. If you approved a roof mount, you acknowledge the potential risks associated with this type of installation (including, without limitation, with respect to any warranty that applies to your roof or roof membrane). By signing this Agreement, scheduling a service or installation visit, and permitting us or our service provider to enter your home, you are authorizing Viasat and its service provider to perform all of the above actions. You are responsible for backing up the data on your computer and we highly recommend that you do so prior to permitting access to us or one of our designated service providers. NEITHER VIASAT NOR ITS SERVICE PROVIDER SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY LOSSES RESULTING FROM THE EQUIPMENT OR ANY INSTALLATION, REPAIR OR OTHER SERVICES ASSOCIATED WITH THE EQUIPMENT, INCLUDING WITHOUT LIMITATION, DAMAGE TO YOUR PREMISES OR LOSS OF SOFTWARE, DATA OR OTHER INFORMATION FROM YOUR COMPUTER. This limitation does not apply to any damages arising from the gross negligence or willful misconduct of us or one of our designated service providers. Time frames for installation, if any, are not guaranteed and may vary depending on the types of services requested and other factors.

  • Installations Any special carpentry, wiring, electrical or other work, gas, steam, water and drainage connection shall be installed at Exhibitor’s expense, and in accordance with the building and Management’s direction.

  • Installation and Use You may install and use the Software only for the number of licenses acquired by you. In order to exercise your rights to the Software under this Agreement, you must activate your copy of the Software in the manner described during the launch sequence.

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “Trade Fixtures” shall mean Lessee’s machinery and equipment that can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. “Lessee Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Section 8.4.1.

  • Installation When installation is required, the Contractor shall be responsible for placing and installing the Commodities or parts in the required locations at no additional charge. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the Commodity or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, tools, rigging, labor, and materials required to install or replace the Commodities or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.