Longitudinal Clause Samples

A Longitudinal clause establishes terms for ongoing or repeated actions, obligations, or assessments over a period of time within an agreement. This clause typically applies to situations where performance, data collection, or compliance must be monitored or fulfilled at regular intervals, such as periodic reporting, recurring payments, or ongoing service delivery. Its core function is to ensure that responsibilities are maintained consistently throughout the contract duration, thereby providing structure and accountability for long-term or recurring commitments.
Longitudinal. Delete the second paragraph and Substitute the following: “Unless otherwise permitted in the contract documents, the HMA shall be laid such that no significant pavement surface disturbance is created between active lanes at the completion of the working day. The maximum longitudinal edge elevation (step) change shall be 0.5”. For mill and repaving work, HMA top course shall be laid in such a way to insure the requirements of surface tolerance and ride quality result. Minor deviations in elevation (<1 inch) of the longitudinal joint (an edge) may occur when paving against existing (pre-contract) asphalt. When this edge is exposed, appropriate warning signs and temporary striping shall be provided as shown on the detail “Thruway Traffic Plans for Uneven Lanes”. Approval to leave any type of surface disturbance or an exposed edge must be requested in writing in advance of paving operations. If approval is granted to leave a longitudinal pavement joint, of any type, exposed to traffic, the paving operation shall be planned so the edge is only exposed to traffic for one day/night and the adjacent lane shall be paved during the next allowable paving period in accordance with the Schedule and Suspension of Work restrictions of the contract. Weekend evenings are considered allowable paving periods when allowed by the Schedule and Suspension of Work. Therefore, the Contractor shall pave on a weekend evening if an edge is exposed.”
View SourceView Similar (3)
Longitudinal. During the transfer of control, longitudinal separation of not less than 10 minutes using the Mach Number Technique shall be used between aircraft flying at the same altitude on the same ATS route.
View SourceView Similar (3)
Longitudinal acceleration means the component of the vector acceleration of a point in the vehicle in the x-direction. The longitudinal acceleration is positive in the direction of forward vehicle travel.
View SourceView Similar (2)
Longitudinal. 2.3.1.1 The minimum longitudinal separation applicable between flights that are to be transferred at the same cruising level on the same ATS route or routes or convergent trajectories, not be less than that specified in each case in Appendix 1 to this Letter of Agreement.
View Source
Longitudinal. During the transfer of control the minimum longitudinal separation to be used between aircraft flying at the same altitude on the same ATS route shall be ten (10) minutes.
View Source
Longitudinal. 2.3.1.1 Applicable separation shall be a fifteen (15) minute minimum longitudinal separation with the utilisation of the Mach number technique (MNT) at FL 250 and above between turbojet aircraft at the same flight level on the same route crossing the common boundary. 2.3.1.2 Applicable longitudinal separation between aircraft in supersonic flight shall be applied as specified in ICAO Doc, 7030. 2.3.1.3 In all other circumstances the longitudinal separation minima shall be twenty (20) minutes.
View Source

Related to Longitudinal

  • Prescription Safety Glasses Prescription safety glasses will be furnished by the employer. The employer retains the authority to establish reasonable rules and procedures regarding frequency of issue, replacement of damaged glasses, limits on reimbursement costs and coordination with the employer's vision plan.

  • Synchronization The Licensor hereby grants limited synchronization rights for One (1) music video streamed online (Youtube, Vimeo, etc..) for up to 500,000 non-monetized video streams on all total sites. A separate synchronisation license will need to be purchased for distribution of video to Television, Film or Video game.

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • Infrastructure Vulnerability Scanning Supplier will scan its internal environments (e.g., servers, network devices, etc.) related to Deliverables monthly and external environments related to Deliverables weekly. Supplier will have a defined process to address any findings but will ensure that any high-risk vulnerabilities are addressed within 30 days.