Manual on Uniform Traffic Control Devices Clause Samples

POPULAR SAMPLE Copied 1 times
Manual on Uniform Traffic Control Devices. Local traffic and access to private driveways shall be maintained at all times. SC-8.1 " Curb & Gutter, Combined (Type B)" shall be measured by the lineal foot of acceptable curb and gutter in place and shall include subgrade preparation, forming, reinforcing steel, pouring and backfilling. SC-8.2 Payment shall be made at the contract unit price bid as shown in the Bid Form for “Curb & Gutter, Combined (Type B)”. Payment shall be full compensation for furnishing and installing all materials and appurtenant work.
View SourceView Similar (2)
Manual on Uniform Traffic Control Devices. The road agency from whom you are applying for a permit should have a copy of the "Manual on Uniform Traffic Control Devices. "It is also available on the Internet at: ▇▇▇▇://▇▇▇▇▇.▇▇▇▇.▇▇▇.▇▇▇/)
View Source
Manual on Uniform Traffic Control Devices published by FHWA Table 1 shows the inscribed circle diameter ranges design standard: Site Category Typical Design Vehicle Inscribed Circle Diameter Range* Rural Single ▇▇▇▇ ▇▇-67 180-200 feet Rural Double ▇▇▇▇ ▇▇-67 180-200 feet Intersections of roadway facility types will consider all forms of intersection to ensure safe operating environment. A modern roundabout is the required form of intersection between two or more major collectors otherwise allowed by City of Madras. Standard roundabout design consists of an inscribed circle diameter of one hundred ninety feet (190’). Two hundred sixty feet (260’) minimum diameter right of way shall be dedicated as default. A right of way with a larger diameter may be required to accommodate an intersection due to various site-specific constraints. A safety and operational analysis will be conducted at proposed/planned roundabouts before a final design is approved when conditioned by the City. In some cases, a lesser standard roundabout design can be approved at the discretion of the Public Works Director but only if it can be proven that a WB-678 design vehicle will not need use of the intersection.
View Source
Manual on Uniform Traffic Control Devices. (a) In the event that surveying on Railroad Property is required the ENGINEER’S personnel shall complete and perform their work in compliance with applicable Railroad approved safety requirements. (b) In the event that surveying on the project requires full or partial lane closures, the ENGINEER’S personnel shall comply with applicable Nebraska Department of Transportation (NDOT) flagger safety certification(s) and signing practices.
View Source
Manual on Uniform Traffic Control Devices. The traffic control plan will be submitted to the City for review and approval prior to inclusion in the Final Design construction plans.
View Source
Manual on Uniform Traffic Control Devices. The Consultant understands and agrees that the above references are not comprehensive. Consultant shall verify and add to the list as needed to complete the Project to industry care and standards.
View Source
Manual on Uniform Traffic Control Devices. Local traffic and access to private driveways shall be maintained at all times. " Curb & Gutter, Combined (Type B)" shall be measured by the lineal foot of acceptable curb and gutter in place and shall include subgrade preparation, forming, reinforcing steel, pouring and backfilling. Payment shall be made at the contract unit price bid as shown in the Bid Form for “Curb & Gutter, Combined (Type B)”. Payment shall be full compensation for furnishing and installing all materials and appurtenant work. “Sidewalk Construction (4")” shall be measured by the square foot of acceptably installed sidewalk in place and shall include all required grading to return area to original or better condition and related work to provide a finished product as intended by the Contract Documents. Payment shall be made at the contract unit price bid as shown in the proposal for “Sidewalk Construction (4")”. Payment shall be full compensation for furnishing and installing all materials and appurtenant work.
View Source
Manual on Uniform Traffic Control Devices. If proper traffic control is not in place, TDOT may order Licensee to stop work until proper traffic control is put in place.
View Source
Manual on Uniform Traffic Control Devices published by FHWA Table 1 shows the inscribed circle diameter ranges design standard:
View Source

Related to Manual on Uniform Traffic Control Devices

  • Traffic Control The Surveyor shall control traffic in and near surveying operations adequately to comply with provisions of the latest edition of the Texas Manual on Uniform Traffic Control Devices – Part VI which can be found on the State’s internet site. In the event field crew personnel must divert traffic or close traveled lanes, a Traffic Control Plan based upon principles outlined in the latest edition of the Texas Manual on Uniform Traffic Control Devices – Part VI shall be prepared by the Surveyor and approved by the State prior to commencement of field work. A copy of the approved plan shall be in the possession of field crew personnel on the job site at all times and shall be made available to the State’s personnel for inspection upon request.

  • Information Technology Accessibility Standards Any information technology related products or services purchased, used or maintained through this Grant must be compatible with the principles and goals contained in the Electronic and Information Technology Accessibility Standards adopted by the Architectural and Transportation Barriers Compliance Board under Section 508 of the federal Rehabilitation Act of 1973 (29 U.S.C. §794d), as amended. The federal Electronic and Information Technology Accessibility Standards can be found at: ▇▇▇▇://▇▇▇.▇▇▇▇▇▇-▇▇▇▇▇.▇▇▇/508.htm.

  • Originating Switched Access Detail Usage Data A category 1101XX record as defined in the EMI Telcordia Practice BR-010-200- 010.

  • Export Control Compliance User acknowledges that Center is an open laboratory for fundamental research that has many foreign persons as its employees and students. User understands and agrees that under no circumstances will User bring export control-listed items, or unpublished software source code or technical information in the form of defense articles or technical data regulated by the International Traffic in Arms Regulations (ITAR), to Center. Use of Center or facilities for activity subject to the ITAR, including the development, assembly or fabrication of defense articles identified on the US Munitions List, is prohibited.

  • Electronic and Information Resources Accessibility and Security Standards a. Applicability: The following Electronic and Information Resources (“EIR”) requirements apply to the Contract because the Grantee performs services that include EIR that the System Agency's employees are required or permitted to access or members of the public are required or permitted to access. This Section does not apply to incidental uses of EIR in the performance of the Agreement, unless the Parties agree that the EIR will become property of the State of Texas or will be used by HHSC’s clients or recipients after completion of the Agreement. Nothing in this section is intended to prescribe the use of particular designs or technologies or to prevent the use of alternative technologies, provided they result in substantially equivalent or greater access to and use of a Product.