Manufacturing Process Validation Clause Samples

POPULAR SAMPLE Copied 1 times
Manufacturing Process Validation. Patheon will establish, together with Cangene, a process validation strategy for the Product. Cangene will review and approve the process validation protocol and process validation report for the Product.
View SourceView Similar (2)
Manufacturing Process Validation. Promptly after the Parties have completed the Master Batch Records, and at Cempra’s request, FFFC will commence and conduct certain validation studies (the “Validation Studies”) to validate the API Manufacturing Procedures pursuant to a mutually agreeable validation plan, in preparation for commercialization, to be reasonably negotiated in good faith and agreed upon in writing by the Parties (which plan, upon such agreement in writing by the Parties, will be set forth in Exhibit H). The actual detailed protocols for such Validation Studies shall be established by the FFFC, in consultation with, and subject to the written agreement of, Cempra, with FFFC preparing the initial proposed protocols for review and comment by Cempra and written approval by Cempra. FFFC shall disclose to Cempra in written reports all results of such Validation Studies and all other deliverables as required under the mutually-agreed upon plan for such Validation Studies. Notwithstanding the foregoing, unless otherwise agreed by FFFC, such protocols for the Validation Studies and such reports shall not contain any information of FFFC included as confidential in the DMF maintained by FFFC under this Agreement. Cempra shall pay FFFC as provided in the form of Exhibit H to be agreed upon for FFFC’s conduct of the Validation Studies. In the event that the Validation Studies are not successfully completed (i.e., they do not satisfy the predefined acceptance criteria in the validation protocol and related site SOPs), FFFC shall work cooperatively with Cempra using commercially diligent efforts to determine the cause of the failure, and shall work diligently and, as soon as possible, implement such changes in the Facility or as otherwise needed to assure that the Validation Studies are successfully completed. Each such validation Batch supplied by FFFC shall meet the API Specifications and shall be suitable for human clinical trial use and/or commercial use in humans, as applicable. FFFC shall use reasonable efforts to work in good faith with Cempra to obtain appropriate Marketing Approvals as needed.
View SourceView Similar (2)
Manufacturing Process Validation. Promptly after the Parties have agreed on the Master Batch Records, Lonza will commence and conduct certain validation studies to validate each of the Manufacturing SOPs (including an engineering manufacturing run for each Bulk Product Component), as described in EXHIBIT F. The actual detailed protocols for such studies shall be developed by mutual agreement of the Parties, with Lonza preparing the initial proposed protocols for review and comment by Altus. Lonza shall disclose to Altus in written reports all results of such validation studies and all other deliverables as required under Exhibit F. Lonza will, [***] provide all documents listed in Section 2.16
View Source
Manufacturing Process Validation. Patheon will establish together with Synageva a process validation strategy for the Product. Synageva will review and approve the process validation protocol and process validation report for the Product.
View Source
Manufacturing Process Validation. ENDO shall be responsible for further developing and validating the manufacturing process of the Licensed Product and related components in the Territory. ZARS shall provide, at ZARS’ expense, the appropriate and
View Source

Related to Manufacturing Process Validation

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • Ordering Process 6.4.1 CLEC, or CLEC's agent, shall act as the single point of contact for its End User Customers' service needs, including without limitation, sales, service design, order taking, Provisioning, change orders, training, maintenance, trouble reports, repair, post-sale servicing, Billing, collection and inquiry. CLEC's End User Customers contacting Qwest in error will be instructed to contact CLEC; and Qwest's End User Customers contacting CLEC in error will be instructed to contact Qwest. In responding to calls, neither Party shall make disparaging remarks about each other. To the extent the correct provider can be determined, misdirected calls received by either Party will be referred to the proper provider of local Exchange Service; however, nothing in this Agreement shall be deemed to prohibit Qwest or CLEC from discussing its products and services with CLEC's or Qwest's End User Customers who call the other Party seeking such information. 6.4.2 CLEC shall transmit to Qwest all information necessary for the ordering (Billing, Directory Listing and other information), installation, repair, maintenance and post-installation servicing according to Qwest's standard procedures, as described in the Qwest Product Catalog (PCAT) available on Qwest's public web site located at ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/wholesale/pcat. Information shall be provided using Qwest's designated Local Service Request (LSR) format which may include the LSR, End User Customer and resale forms. 6.4.3 Qwest will use the same performance standards and criteria for installation, Provisioning, maintenance, and repair of services provided to CLEC for resale under this Agreement as Qwest provides to itself, its Affiliates, its subsidiaries, other Resellers, and Qwest retail End User Customers. The installation, Provisioning, maintenance, and repair processes for CLEC's resale service requests are detailed in the Access to OSS Section of this Agreement, and are applicable whether CLEC's resale service requests are submitted via Operational Support System or by facsimile. 6.4.4 CLEC is responsible for providing to Qwest complete and accurate End User Customer Directory Listing information including initial and updated information for Directory Assistance Service, white pages directories, and E911/911 Emergency Services. The Ancillary Services Section of this Agreement contains complete terms and conditions for Directory Listings for Directory Assistance Services, white pages directories, and E911/911 Emergency Services. 6.4.5 If Qwest's retail End User Customer, or the End User Customer's New Service Provider orders the discontinuance of the End User Customer's existing Qwest service in anticipation of the End User Customer moving to a New Service Provider, Qwest will render its closing ▇▇▇▇ to the End User Customer, discontinuing Billing as of the date of the discontinuance of Qwest's service to the End User Customer. If the Current Service Provider, or if the End User Customer's New Service Provider orders the discontinuance of existing resold service from the Current Service Provider, Qwest will ▇▇▇▇ the Current Service Provider for service through the date the End User Customer receives resold service from the Current Service Provider. Qwest will notify CLEC by Operational Support System interface, facsimile, or by other agreed-upon processes when an End User Customer moves from the Current Service Provider to a New Service Provider. Qwest will not provide the Current Service Provider with the name of the New Service Provider selected by the End User Customer. 6.4.6 CLEC shall provide Qwest and Qwest shall provide CLEC with points of contact for order entry, problem resolution and repair of the resold services. These points of contact will be identified for both CLEC and Qwest in the event special attention is required on a service request. 6.4.7 Prior to placing orders on behalf of the End User Customer, CLEC shall be responsible for obtaining and having in its possession Proof of Authorization (POA), as set forth in the POA Section of this Agreement. 6.4.8 Due Date intervals for CLEC's resale service requests are established when service requests are received by Qwest through Operational Support Systems or by facsimile. Intervals provided to CLEC shall be equivalent to intervals provided by Qwest to itself, its Affiliates, its subsidiaries, other Resellers, and to Qwest's retail End User Customers.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Manufacturing Technology Transfer Except as provided in Section 4.3(f)(iii)(1) and Section 6.10, with respect to any Collaboration Product (or LGC Reserved Product, if applicable) for which LGC (or its Affiliate) performed CMC Development or CMC Manufacturing, if (a) Cue does not elect for LGC to perform CMC Step 2, CMC Step 3, or CMC Step 4 (or with respect to LGC Reserved Products, upon completion of CMC Step 1), or (b) upon failure of the Parties to reach agreement with respect to a Clinical Supply Agreement or a Commercial Supply Agreement or (c) [***] under this Agreement and does not cure such breach within [***] days (provided, that if such breach is not reasonably capable of cure within such [***] day period, then such cure period shall be automatically extended for an additional [***] day period as long as LGC continues to use diligent efforts to cure such breach in accordance with a reasonable cure plan and if such breach is not reasonably capable of cure within such combined [***] day period, then Cue shall reasonably consider consenting to any extension of such cure period as long as LGC continues to use diligent efforts to cure such breach in accordance with a reasonable cure plan), as applicable, then, in each case upon the written request of Cue, LGC shall use Commercially Reasonable Efforts to make a technology transfer to an Approved CMO the Manufacturing processes (including materials and such other information) but solely as is necessary to enable the Manufacture of such Collaboration Product (including the Collaboration Compound therein) (or LGC Reserved Product, including the LGC Reserved Compound therein, if applicable) by such Approved CMO to comparable biochemical structure, quality and purity as that Manufactured by LGC or its Affiliate or CMO, provided that neither Cue, LGC or any Third Party shall perform such a technology transfer to any CMO [***] without LGC’s consent, not to be unreasonably withheld, conditioned or delayed if LGC has approved the CMO to manufacture Collaboration Products (or LGC Reserved Products, if applicable). LGC shall conduct such technology transfer as soon as reasonably practicable after receiving such written notice, using good faith efforts to support supply needed to achieve timelines in the Cue Territory Development Plan (or Cue’s development plan for LGC Reserved Products, if applicable) or Cue Territory Commercialization Plan, as applicable. LGC shall conduct the first technology transfer for each Collaboration Product (or LGC Reserved Products, if applicable) [***] (provided that [***]) for a period of up to [***] months from the date Cue or its designee has provided notice it is ready to receive the technology transfer, provided, that such [***] month period [***]. After the expiration of the initial such [***] month period for a Collaboration Product (or LGC Reserved Products, if applicable), if required to complete the technology transfer to enable the Manufacture of such Collaboration Product (including the Collaboration Compound therein) (or LGC Reserved Product, including the LGC Reserved Compound therein, if applicable) by such Approved CMO to comparable biochemical structure, quality and purity as that Manufactured by LGC, LGC shall continue to provide support to Cue for up to an additional [***] period for up to [***] hours at the FTE Rate and thereafter at [***]. Thereafter, LGC will also provide [***] for such Collaboration Product (or LGC Reserved Products, if applicable). Neither Cue nor its Affiliates or Cue Collaborators shall reverse engineer any materials provided hereunder by LGC. Notwithstanding anything in this Agreement to the contrary, LGC’s CMC information may only be shared with an Approved CMO.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements. 2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.