Net Metering Facility Sample Clauses

POPULAR SAMPLE Copied 1 times
Net Metering Facility a. The Net Metering Facility shall mean the electrical generating facility described in Exhibit A, attached hereto titled Customer’s Application for Net Metered Electrical Generation. Exhibit A is hereby incorporated and made part of this Agreement as if fully set forth herein. i. Net Metering Facility shall consist of an integrated system of equipment comprising an electrical generation project and related equipment having a maximum output capacity of kilowatts (kW). ii. The Customer shall construct, install, own, operate, maintain, repair, and replace the Net Metering Facility in compliance with this Agreement, IEEE Standards, the National Electrical Code and any other applicable standards required by Columbia River PUD, including ORS 757.300. iii. Net Metering Facility shall be located on Customer's Premises and shall be interconnected with PUD's electrical distribution system. b. Customer confirms that he/she is the owner of the Premises, is authorized to install the Net Metering Facility at the Premises, that all the information in Customer’s Application is true and accurate and the primary purpose of the Net Metering Facility is to offset Customer's electrical power requirements. c. PUD shall not provide transmission service for Customer.
View SourceView Similar (2)
Net Metering Facility i. Net Metering Facility Credits shall be applied to Customer’s account at the PUD’s avoided cost energy rate as established in the Rate Schedule 97 as modified from time to time. ii. Annual credit shall be applied to Customer of record’s open PUD account. If there is a change in the account holder, any credits accrued will be applied at the time of final billing or no later than March of the following year.
View SourceView Similar (2)
Net Metering Facility. The Applicant will be responsible for all reasonable expenses, including overheads, associated with owning, operating, maintaining, repairing and replacing its Net Metering Facility.
View SourceView Similar (2)
Net Metering Facility i) Eligible Consumer will generate solar power for self consumption and feed excess power into the grid of DISCOM. ii) In the premises of Eligible Consumer, a meter will be installed by DISCOM having the feature of recording both the import and export values, besides complying with other parameters notified in CEA metering regulations and TRANSCO/DISCOM procedures for arriving net energy for the billing period.
View SourceView Similar (2)
Net Metering Facility. Customer-generator’s net-metering facility shall mean the generating facility described in Exhibit A. This facility shall employ solar, wind, fuel cell or hydroelectric power generation with a maximum nameplate capacity of twenty five
View Source
Net Metering Facility. Customer’s Net-Metering facility shall consist of solar and wind generation with a maximum output capacity of twenty-five (25) kilowatts that is located on the Customers premises, that is interconnected with and operates in parallel with Lower Valley’s transmission and distribution facilities, and is intended primarily to offset part or all of Customer’s own electrical requirements. Customer shall be responsible for the design, installation and operation of the facility and for obtaining and maintaining all required permits and approvals related thereto. Customer shall not make any modification to the facilities without the prior written consent of Lower Valley.
View Source
Net Metering Facility. Customer’s net-metering facility (the “Facility”) shall mean the generating facility described in the Application attached and made a part hereof. The Facility shall consist of a solar, wind, fuel cell, or hydroelectric power generating facility with a maximum output capacity of twenty five (25) kilowatts for residential and one-hundred (100) kilowatts for commercial. The facility that is located on Customer’s premises, that is interconnected with and operates in parallel with Co-op’s distribution facilities, and is intended primarily to offset part or all of Customer’s own electrical requirements. Customer shall be responsible for the design, installation and operation of the Facility and for obtaining and maintaining all required permits and approvals related thereto. This Agreement is applicable only to the net-metering facility described in the Application and Customer shall not make any modification to the Facility without the prior written consent of Co-op.
View Source

Related to Net Metering Facility

  • Generating Facility The Interconnection Customer’s device for the production of electricity identified in the Interconnection Request, but shall not include the Interconnection Customer’s Interconnection Facilities.

  • Interconnection Customer’s Interconnection Facilities The Interconnection Customer shall design, procure, construct, install, own and/or control the Interconnection Customer’s Interconnection Facilities described in Appendix A at its sole expense.

  • Metering Equipment 13.01. Utility will furnish, install, own and maintain metering equipment capable of measuring the flow of kilowatt-hours (kWh) of energy. The Customer's service associated with the CRG will be metered at a single metering point. The metering equipment will measure energy delivered by Utility to Customer and also measure energy delivered by Customer to Utility. Customer agrees to provide safe and reasonable access to the premises for installation of this equipment and its future maintenance or removal.

  • Participating TO’s Interconnection Facilities The Participating TO shall design, procure, construct, install, own and/or control the Participating TO’s Interconnection Facilities described in Appendix A at the sole expense of the Interconnection Customer. Unless the Participating TO elects to fund the capital for the Participating TO’s Interconnection Facilities, they shall be solely funded by the Interconnection Customer.

  • One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Onvoy to Frontier, Onvoy, at Onvoy’s own expense, shall: 2.3.1.1 provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA; and/or 2.3.1.2 obtain transport for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA (a) from a third party, or, (b) if Frontier offers such transport pursuant to a Frontier access Tariff, from Frontier. 2.3.2 For each Tandem or End Office One-Way Interconnection Trunk group for delivery of traffic from Onvoy to Frontier with a utilization level of less than sixty percent (60%) for final trunk groups and eighty-five percent (85%) for high usage trunk groups, unless the Parties agree otherwise, Onvoy will promptly submit ASRs to disconnect a sufficient number of Interconnection Trunks to attain a utilization level of approximately sixty percent (60%) for all final trunk groups and eighty-five percent (85%) for all high usage trunk groups. In the event Onvoy fails to submit an ASR to disconnect One-Way Interconnection Trunks as required by this Section, Frontier may disconnect the excess Interconnection Trunks or bill (and Onvoy shall pay) for the excess Interconnection Trunks at the rates set forth in the Pricing Attachment. 2.3.3 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Frontier to Onvoy, Frontier, at Frontier’s own expense, shall provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA.