Outage Scheduling Procedures Sample Clauses

The Outage Scheduling Procedures clause defines the process and requirements for planning and coordinating scheduled outages of equipment or services. It typically outlines how parties must notify each other in advance, the information to be provided, and the approval process for proposed outage times. This clause ensures that outages are managed in an orderly manner, minimizing disruption and allowing all parties to prepare for and mitigate the impact of service interruptions.
Outage Scheduling Procedures. Producer shall be responsible for all costs associated with all requirements and timelines for generation outage Scheduling contained in the Producer's otherwise applicable retail Tariff and applicable CAISO Tariffs. Form 14-786 ▇▇/▇▇▇▇
View SourceView Similar (10)
Outage Scheduling Procedures. Seller shall be responsible for all expenses and costs associated with all requirements and timelines for generation outage scheduling contained in the ISO’s Scheduled and Forced Outage Procedure T-113 as posted on the ISO’s website. In accordance with the provisions of Section 4.02(b), if in any Settlement Interval, a Generating Facility’s Scheduled Amounts deviate from the Generating Facility’s Delivered Amounts by more than plus or minus three percent (± 3%) of the Generating Facility’s Delivered Amounts, then Seller shall be subject to a payment adjustment calculated by SCE in accordance with the procedures and formulae set forth below.
View Source

Related to Outage Scheduling Procedures

  • Billing Procedures The Supporting Party will bill the Protecting Party for actual costs incurred for Assistance by Hire. Reimbursements will be limited to the provisions of the Agreement and the applicable OP, regardless of whether or not it is authorized on the Resource Order or other documentation produced by the incident. Reimbursable costs may include transportation, salary, overtime, per diem and other approved expenses of supporting agency personnel. Rates and conditions of use for the equipment and personnel are documented in the OP. Parties shall submit a bill within 90 days of the incident. Parties must use their own invoice form for billing under this Agreement to avoid any confusion with other services that may have been ordered under other agreements. Invoices must identify Supporting Party’s name, address, and Taxpayer Identification Number (Department only), fire name, order and request number, and bill number and amount. Invoice supporting documentation must include description of services performed, period of services performed, and any applicable cost share agreements. Supporting documentation will itemize details of billing, listing personnel, equipment, travel and per diem, aircraft, supplies and purchases as approved in the attached OP. It will also include itemized deductions for maintenance and repair of equipment. Department invoices will include “Record of Activities” (FSLA-5) and U.S. Forest Service invoices will include transaction register. Invoices for services under this agreement must be sent to: ▇▇▇▇▇ ▇▇▇▇▇▇▇, FFMO ▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇ Telephone: ▇▇▇-▇▇▇-▇▇▇▇ FAX: ▇▇▇-▇▇▇-▇▇▇▇ Email: ▇▇▇▇▇▇▇▇@▇▇.▇▇▇.▇▇ ▇▇▇ ▇▇▇▇▇▇▇▇, FIRE CHIEF ▇.▇. ▇▇▇ ▇▇▇ ▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇ Telephone: ▇▇▇-▇▇▇-▇▇▇▇ FAX: ▇▇▇-▇▇▇-▇▇▇▇ Email: ▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇@▇▇▇▇▇▇▇▇.▇▇▇ All bills will have a payment due date 30 days upon receipt. Contested ▇▇▇▇▇▇▇▇: Written notice that a bill is contested will be mailed to the Party within 30 days of receipt of the invoice and will fully explain the contested items. Contested items should be resolved no later than 60 days following receipt of the written notice. Parties are responsible for facilitating resolution of contested ▇▇▇▇▇▇▇▇. Billing requirements and rates are documented in the attached OP.

  • BILLING PROCEDURE a. The Contractor shall submit, not more than semi-monthly, properly completed A-19 vouchers (the "voucher") to one of the following: The Department of Children, Youth, and Families Attn: ▇▇▇▇▇ ▇▇▇▇▇▇▇▇ PO Box 40970 Olympia WA 98504-0970 Or, email a scan of an original, signed A-19 voucher directly to the DCYF Contract Manager at ▇▇▇▇▇.▇▇▇▇▇▇▇▇@▇▇▇▇.▇▇.▇▇▇ b. Payment to the Contractor for approved and completed work shall be made by warrant or Electronic Funds Transfer by DCYF and considered timely if made within 30 days of receipt of a properly completed voucher. Payment shall be sent to the address designated by the Contractor and set forth in this Contract. c. Each voucher must clearly reference the DCYF Contract Number and the Contractor's Statewide Payee Registration number assigned by the Office of Financial Management (OFM). d. Properly completed vouchers and attachments completed by the Contractor must contain the information described in Exhibit A under the Section titled "Compensation and Voucher Payment".

  • ORDERING PROCEDURES All task orders under OASIS SB must: 1. Be awarded by an OCO with a Delegation of Procurement Authority (DPA) or by a Contractor authorized to use the OASIS SB Contracts as a Government Source of Supply 2. Be within the scope of Section C and all other terms and conditions of the OASIS SBcontract 3. Be solicited and awarded under the proper NAICS Code and corresponding OASIS SB MA-IDIQ Contract Number (See Section H.4.) 4. Identify the proper Product Service Code (See Section H.5.) and, 5. Comply with the OASIS SB Contract, OASIS SB DPA Training, OASIS SB Ordering Guide, the Ordering Procedures in FAR Subpart 16.505, Ordering, and other applicable agency specific regulatorysupplements

  • Project Delivery Order Procedures The TIPS Member having approved and signed an interlocal agreement, or other TIPS Membership document, may make a request of the awarded vendor under this Agreement when the TIPS Member has services that need to be undertaken. Notification may occur via phone, the web, email, fax, or in person. Upon notification of a pending request, the awarded vendor shall make contact with the TIPS Member as soon as possible, but must make contact with the TIPS Member within two working days. Scheduling of projects (if applicable) may be accomplished when the TIPS Member issues a Purchase Order and/or an Agreement or Contract that will serve as “the notice to proceed” as agreed by the Vendor and the TIPS Member. The period for the delivery order will include the mobilization, materials purchase, installation and delivery, design, weather, and site cleanup and inspection. No additional claims may be made for delays as a result of these items. When the tasks have been completed the awarded vendor shall notify the client and have the TIPS Member or a designated representative of the TIPS Member inspect the work for acceptance under the scope and terms in the Purchase Order and/or Agreement or Contract. The TIPS Member will issue in writing any corrective actions that are required. Upon completion of these items, the TIPS Member will issue a completion notice and final payment will be issued per the contractual requirements of the project with the TIPS Member. Any Construction contract prepared by the TIPS Member’s Legal Counsel may alter the terms of this subsection, “Scheduling of Projects”.

  • Safety Procedures The Contractor shall: (a) comply with all applicable safety regulations according to Attachment H; (b) take care for the safety of all persons entitled to be on the Site; (c) use reasonable efforts to keep the Site and Works clear of unnecessary obstruction so as to avoid danger to these persons; (d) provide fencing, lighting, guarding and watching of the Works until completion and taking over under clause 10 [Employer's Taking Over]; and (e) provide any Temporary Works (including roadways, footways, guards and fences) which may be necessary, because of the execution of the Works, for the use and protection of the public and of owners and occupiers of adjacent land.