Process Qualification Clause Samples
POPULAR SAMPLE Copied 1 times
Process Qualification. In the event that Jazz requests and Skyworks agrees to participate in the qualification of any Process at a site other than Newport Beach, Jazz and Skyworks shall enter into a separate written agreement regarding the use of any Confidential Information in the qualification process.
Process Qualification. (a) 12.4.1. [***]
Process Qualification. Following its receipt of the Sipex Process Technology Materials, Silan shall commence the process of implementing the Processes in the Silan Facility and the production of Qualification Wafers for each of the Sipex Processes, which wafers shall be sent to Sipex to complete Process Qualification in accordance with Section 3.3. Process Qualification not be deemed to have occurred until such time as Sipex completes all Process Qualification testing and confirms to its reasonable satisfaction that the Sipex Processes as installed in the Silan Facility conform to all Process Qualification Specifications set forth in Exhibit B-5. The foregoing procedures are set forth in greater detail in Exhibit B-1 and shall be coordinated by the Project Coordinators. Subject to Sipex's delivery of the Sipex Process Technology Materials and its performance of its obligations under Article 2, Silan shall deliver to Sipex, for each of the Sipex Process Technologies, Qualification Wafers by the relevant Process Qualification Date that will achieve Process Qualification in accordance herewith and Exhibit B-1. Silan acknowledges that time is of the essence with respect to its delivery of Qualification Wafers that meet the PCM Criteria for Process Qualification. In the event that any Qualification Wafers fail to meet the relevant PCM Criteria for Process Qualification, Sipex shall provide Silan with reasonable assistance in accordance with the terms of this Agreement to determine the cause of such failure and possible corrections for Silan to make in order to resolve such failure. It is anticipated that at least three (3) wafer fabrication lots and a minimum of six finished Qualification Wafers for each of the specific Sipex Product groups will be created in the course of each Process Qualification. Silan will seek to process Qualification Wafers with a cycle time of no more than 1.5 day per mask layer.
Process Qualification. Characterization and quaHficaLion of the UBM and bumping processes will be carried out at both the component and board level by the wafer bumping Consortium Members and by the end users. The full array of standard tests will be defined to be used on all of the process options. The qualification will include but is not limited too: . Component level tests the assess bump/UBM/chip mechanical strength, electrical connection and environmental stability. . Board level tests will be carried out with underfill. These tests will focus on mechanical and thermomechanical stability such as power cycling and board flexure. . Test chips will be obtained and developed to allow for process development and characterization. Several of the Members will use their own existing test chips. In addition, them will be mechanical and functional test chips made available to allow for common qualification methods where feasible. . Mil Std qualification testing methods will be used. AGREEMENT NUMBER: MDA972-95-3-0031 ATTACHMENT NO. 1, PAGE 4
Process Qualification. The Parties shall cooperate in developing the first Macronix Product as a vehicle for qualifying Macronix process based on Saifun NROM Technology (the "Macronix NROM Based Process"). Macronix will work diligently on qualifying the Macronix NROM Based Process and the first Macronix Product and will make its best effort to conclude the Macronix NROM Based Process qualification as soon as possible.
Process Qualification. Manufacturer must implement and perform a process and equipment qualification process as required by FDA (IQ/OQ/PQ).
Process Qualification. 4.5.2.1 Harmonic may select to conduct process qualification on all new builds.
4.5.2.2 Qualification lot quantity will be in the range of 10 to 100 units depending on the type of product. Qualification quantity will be defined in the PO.
4.5.2.3 CM shall develop a complete set of documentation prior to start of qualification. The documentation includes:
4.5.2.3.1 Quality Plan
4.5.2.3.2 Process Instruction
4.5.2.3.3 Critical Process Goal Target Harmonic Inc. / Plexus Confidential Harmonic-Plexus PSA 17 September 03
4.5.2.3.4 Training and Certification record
4.5.2.4 CM shall run the qualification lot in presence of Harmonic representative and complete the qualification lot in agreed upon time frame.
4.5.2.5 Harmonic will conclude the qualification run upon completion. If CM fails to achieve the predetermined process goals, a re-qualification is required.
4.5.2.6 Re-qualification can only be started after necessary adjustment, correction or improvement is made.
Process Qualification. 4.5.2.1 Harmonic may select to conduct process qualification on all new builds.
4.5.2.2 Qualification lot quantity will be in the range of 10 to 100 units depending on the type of product. Qualification quantity will be defined in the PO.
4.5.2.3 CM shall develop a complete set of documentation prior to start of qualification. The documentation includes:
4.5.2.3.1 Quality Plan 4.5.2.3.2 Process Instruction
Process Qualification. All new FED Processes implemented --------------------- during the *Confidential Treatment has been requested for marked portions of this agreement.