Quality and Testing Clause Samples

Quality and Testing. Supplier shall adhere to such quality and qualification requirements as may be specified by Cisco and provided to Supplier from time to time. Supplier shall test Product prior to shipment in accordance with mutually agreed test procedures.
View SourceView Similar (5)
Quality and Testing. 3.1 Without prejudice to any implied terms and conditions, warranties or terms, the Supplier warrants that: (a) the Services will be provided with reasonable skill and care to the appropriate professional standard and to the satisfaction of Exterion Media; (b) the Products and Services shall be of satisfactory quality and free from defects in provision, design, materials and workmanship; (c) the Products shall meet the description of any agreed sample and otherwise conform with any specification given; (d) the Products and Services shall be fit for any such purpose as made known by Exterion Media to the Supplier, and in this respect Exterion Media relies on the Supplier's skill and judgment; and (e) the Services will be performed by appropriately qualified and trained personnel, with all due skill, care and diligence and to such a high standard of quality as it is reasonable for Exterion Media to expect in the circumstances. 3.2 The Supplier warrants, represents and undertakes that all Products and Services, including the design, manufacture, provision and/or delivery thereof, comply with all relevant statutes, regulations and other legal requirements including those relevant to health, safety and welfare. 3.3 The Supplier shall at its own expense carry out any tests and inspections which may be requested by Exterion Media to ensure that the warranties contained in this clause 3 are true and accurate. 3.4 The Supplier will, upon request by Exterion Media, re-perform free of charge any Services or any part thereof which in Exterion Media's reasonable opinion fails to meet the requirements of all due skill, care and diligence and other warranty requirements set out in Clause 3. 3.5 If as a result of any inspection or testing Exterion Media, in its sole opinion but acting reasonably, determines that the Products do not or will not conform to the warranties in this clause 3 or any description detailed in the Purchase Order, Exterion Media will inform the Supplier in writing. The Supplier must then promptly take all necessary action to ensure conformity and Exterion Media has the right to require and witness further testing and inspection. 3.6 Notwithstanding clauses 3.3 to 3.5 above and in addition thereto, Exterion Media may, at any time, offer and the Supplier will not unreasonably refuse or delay acceptance of, any assistance from Exterion Media personnel or authorised representatives to help manage the production and delivery of the Products and/or Service...
View Source
Quality and Testing. The Landlord shall provide a third-party inspection program for quality control during the course of the project including but not limited to soils, cast-in­ place concrete, structural steel, fireproofing and envelope/waterproofing (including roofing, caulking, glazing, etc.). Nondestructive testing of in place concrete thickness will be required.
View Source
Quality and Testing. 1. Materials will be subject to WIKA's standard manufacturing specifications. WIKA reserves the right to change its standard manufacturing specifications at any time without incurring obligation for equipment previously or subsequently sold.
View Source
Quality and Testing. The Contractor shall provide and perform: a. Work Instructions for Overhaul of components b. Overhaul Production Quality Plan (Wabtec QIP process) c. Quality Assurance and Quality Control Function, including access upon request to Contractor’s quality and inspection records d. First Article Inspections (FAI) for new production parts and parts being produced by new sub-suppliers including FAI reports shall be available for review by the SFMTA on site at Wabtec, but do not need to be sent to the SFMTA
View Source
Quality and Testing. The composition of Gas Oil and Alkylation Feedstock and the quality of CC Product and Alkylation Product shall be determined by samples taken periodically as agreed by the Parties by Refiner for analysis by analytical test methods set forth in Schedule G. Customer may take samples of CC Product at the CC Redelivery Point and Alkylation Product at the Alkylation Redelivery Point and analyze those samples by the analytical test methods set forth in Schedule G. Customer may request samples be taken by Refiner of Gas Oil, Alkylation Feedstock and Alkylation Product at the location of the composite samplers to be shipped to Customer for analysis. If the analysis by Customer differs from the test results furnished by Refiner for the same batch of Feedstock or Product, Customer shall have the right, within five days from receipt of the test results from Refiner, to request that samples be submitted to a mutually agreed upon independent inspector and laboratory for referee analysis. The determination of the inspector and laboratory shall be conclusively binding on the Parties and the cost of such independent inspector and laboratory shall be borne equally by the Parties. All samples shall be taken and all tests shall be made in accordance with Schedule G.
View Source
Quality and Testing. ▇▇▇▇▇▇ shall thoroughly test the quality of all Source Code and Binary Code it delivers to Red Hat in accordance with customary practice within the industry. All such code delivered to Red Hat by ▇▇▇▇▇▇ shall be of commercial production quality. Red Hat shall have the option to test all such code pursuant to its own quality assurance procedures, and may reject any code it reasonably believes does not meet commercial production quality. In the event that Bugs are -------------- **[CONFIDENTIAL TREATMENT REQUESTED] INDICATES MATERIAL THAT HAS BEEN OMITTED AND FOR WHICH CONFIDENTIAL TREATMENT HAS BEEN REQUESTED. ALL SUCH OMITTED MATERIAL HAS BEEN FILED WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. discovered in the ▇▇▇▇▇▇ Software, ▇▇▇▇▇▇ will use his best efforts to correct the Bugs in an expeditious manner.
View Source
Quality and Testing 
View SourceView Similar (2)

Related to Quality and Testing

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.

  • Quality- and Cost-Based Selection Except as ADB may otherwise agree, the Borrower shall apply quality- and cost-based selection for selecting and engaging consulting services.

  • Inspections and Tests 26.1 The Supplier shall at its own expense and at no cost to the Procuring Entity carry out all such tests and/or inspections of the Goods and Related Services as are specified in the SCC. 26.2 The inspections and tests may be conducted on the premises of the Supplier or its Subcontractor, at point of delivery, and/or at the Goods' final destination, or in another place in Kenya as specified in the SCC. Subject to GCC Sub-Clause 26.3, if conducted on the premises of the Supplier or its Subcontractor, all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity. 26.3 The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in GCC Sub-Clause 26.2, provided that the Procuring Entity bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all travelling and board and lodging expenses. 26.4 Whenever the Supplier is ready to carry out any such test and inspection, it shall give a reasonable advance notice, including the place and time, to the Procuring Entity. The Supplier shall obtain from any relevant third party or manufacturer any necessary permission or consent to enable the Procuring Entity or its designated representative to attend the test and/or inspection. 26.5 The Procuring Entity may require the Supplier to carry out any test and/or inspection not required by the Contract but deemed necessary to verify that the characteristics and performance of the Goods comply with the technical specifications codes and standards under the Contract, provided that the Supplier's reasonable costs and expenses incurred in the carrying out of such test and/or inspection shall be added to the Contract Price. Further, if such test and/or inspection impedes the progress of manufacturing and/or the Supplier's performance of its other obligations under the Contract, due allowance will be made in respect of the Delivery Dates and Completion Dates and the other obligations so affected. 26.6 The Supplier shall provide the Procuring Entity with a report of the results of any such test and/or inspection. 26.7 The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Sub- Clause 26.4. 26.8 The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, nor the issue of any report pursuant to GCC Sub-Clause 26.6, shall release the Supplier from any warranties or other obligations under the Contract.

  • Quality Standards Each Party agrees that the nature and quality of its products and services supplied in connection with the other Party's Marks will conform to quality standards set by the other Party. Each Party agrees to supply the other Party, upon request, with a reasonable number of samples of any Materials publicly disseminated by such Party which utilize the other Party's Marks. Each Party will comply with all applicable laws, regulations, and customs and obtain any required government approvals pertaining to use of the other Party's marks.