Quality Control Tests Sample Clauses

POPULAR SAMPLE Copied 1 times
Quality Control Tests. The results from the moisture, strength, and maximum dry density and optimum moisture content tests. All tests shall be clearly documented on hard copies and/or electronically and shall be identifiably related to the test results in the diary.
View SourceView Similar (3)
Quality Control Tests. Until the parties execute the Quality Agreement, this Section 7.1 shall govern quality control; once the Quality Agreement is executed, it shall supplant this Section 7.1 in its entirety. (a) Every Batch of Product supplied by Supplier shall be delivered in accordance with ARTICLE V, subject to Purchaser’s inspection, and may be rejected if any such Product fails to conform with any warranty of Supplier, the Specifications, or the other requirements set forth herein; provided, however, that Purchaser shall bear the cost of loss if the Product met all Specifications but was determined not to comply with Applicable Law. Such a rejection shall be communicated to Supplier within [***], from the later of (i) the date of packaging of such Product, or (ii) [***] from delivery of such Product, and will provide sufficient detail for the reasons for such rejection to permit Supplier to investigate the alleged non-conformity. Supplier shall not be deemed to be at fault if the Product met the applicable Specifications or if Raw Materials provided by Purchaser or a supplier mandated by Purchaser (as provided for in Section 3.4, provided that Supplier is compliant with its obligations under Section 3.4) were the reason for the non-conformity. Purchaser shall be deemed to have accepted each Batch in a shipment of Product if Supplier does not receive notice to the contrary within such [***] as set forth in this Section 7.1(a). In addition, and notwithstanding the foregoing, Purchaser will have the right to reject a Batch or part thereof, upon notice to Supplier, if Purchaser discovers any latent defects in a Batch or part thereof. If Purchaser rejects any Batch or part of a Batch, the Parties shall review the samples, Batch records and other information, as appropriate, to determine whether Supplier is at fault for any such non-conformity. If Supplier is deemed to be at fault, it shall replace the non-conforming Product at no further cost to Purchaser, and it shall reimburse Purchaser for all costs associated with the return and replacement of the non-conforming Product. If there is a disagreement between the Parties as to whether any Product conforms to the requirements of this Agreement, then samples, Batch records and other information, as appropriate and available, from the Batch in dispute will be submitted for testing and evaluation to an independent qualified testing laboratory agreed to by both Parties. The Parties agree that any testing method used by an independ...
View SourceView Similar (2)
Quality Control Tests. Catalent shall ensure that the Parties adopt from time to time quality control tests and that representative samples of Bulk Drug Substance and Drug Product are taken, analyzed and retained in accordance with the Specifications, cGMPs, applicable Laws and Regulatory Acts and the Quality Agreement, using quality control methods provided by or agreed with Sarepta and validated by Catalent prior to the release of the Batches.
View Source
Quality Control Tests. As may be provided for in the Scope of Work, Catalent shall ensure that representative samples of Bulk Drug Substance and Drug Product are taken, analyzed and retained in accordance with the Specifications, cGMPs and the Quality Agreement, ​
View Source
Quality Control Tests. Third Wave shall disclose to Endogen particulars of the results of Third Wave's quality control tests carried out on the Third Wave Deliverables and Cleavase Enzymes provided hereunder if these particulars are requested by Endogen and will at the request of Endogen permit a duly authorized representative of Endogen to visit and review the quality control and quality assurance procedures of Third Wave with respect to the Third Wave Deliverables and Cleavase Enzymes provided hereunder.
View Source
Quality Control Tests. The contractor shall at his own cost set up Laboratory at site of work to carry out the testing of materials which are to be used for the work. This laboratory shall be approved by the Engineer-in- charge. The testing shall be done as per frequencies mentioned in the specification/additional specification of each item of Schedule 'B'. The 30% of the test included in Annexure 'A' (On Page No. 103) shall be carried out in Vigilance and Quality Control Laboratory at the cost of contractor and balance 70% in the site laboratory. The test which are not included in Annexure 'A' 50% test shall be carried out each in Vigilance and Quality Control laboratory and site laboratory. The frequency of testing of construction materials is mentioned in Annexure-B on Page No. 104 to 105.
View Source
Quality Control Tests. The Supplier shall perform all applicable Quality Control Tests on each Product prior to shipment to AMO or its Affiliates. Each Lot of Products delivered to AMO or its Affiliates shall be accompanied by a Certificate of Conformance, fully completed by the Supplier, certifying that the Products have passed all applicable Quality Control Tests and fully comply with all Product Specifications.
View Source
Quality Control Tests 
View SourceView Similar (9)

Related to Quality Control Tests

  • Quality Control Program Engineer shall have a quality control program in place that ensures that all deliverable work is of high quality. Engineer shall submit a plan detailing its program to the Inspection Branch of the TxDOT Bridge Division for review and approval prior to beginning work. State may review or audit the programs.

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time. B. Controlled Affiliate agrees to comply with all applicable federal, state and local laws. C. Controlled Affiliate agrees that it will provide on an annual basis (or more often if reasonably required by Plan or by BCBSA) a report or reports to Plan and BCBSA demonstrating Controlled Affiliate’s compliance with the requirements of this Agreement including but not limited to the quality control provisions of this paragraph and the attached Exhibit A. D. Controlled Affiliate agrees that Plan and/or BCBSA may, from time-to-time, upon reasonable notice, review and inspect the manner and method of Controlled Affiliate’s rendering of service and use of the Licensed Marks and Name. E. As used herein, a Controlled Affiliate is defined as an entity organized and operated in such a manner, that it meets the following requirements: (1) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), must have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having not less than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate at least equal to that exercised by persons or entities (jointly or individually) other than the Controlling Plan(s); and Notwithstanding anything to the contrary in (a) through (b) hereof, the Controlled Affiliate’s establishing or governing documents must also require written approval by the Controlling Plan(s) before the Controlled Affiliate can: (i) change its legal and/or trade names; (ii) change the geographic area in which it operates; (iii) change any of the type(s) of businesses in which it engages; (iv) create, or become liable for by way of guarantee, any indebtedness, other than indebtedness arising in the ordinary course of business; (v) sell any assets, except for sales in the ordinary course of business or sales of equipment no longer useful or being replaced; (vi) make any loans or advances except in the ordinary course of business; (vii) enter into any arrangement or agreement with any party directly or indirectly affiliated with any of the owners or persons or entities with the authority to select or appoint members or board members of the Controlled Affiliate, other than the Plan or Plans (excluding owners of stock holdings of under 5% in a publicly traded Controlled Affiliate); (viii) conduct any business other than under the Licensed Marks and Name; (ix) take any action that any Controlling Plan or BCBSA reasonably believes will adversely affect the Licensed Marks and Name. In addition, a Plan or Plans directly or indirectly through wholly owned subsidiaries shall own at least 50% of any for-profit Controlled Affiliate. (2) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having more than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate. In addition, a Plan or Plans directly or indirectly through wholly-owned subsidiaries shall own more than 50% of any for-profit Controlled Affiliate.

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • Alcohol Testing Alcohol testing will be conducted by using an evidential breath-testing device (EBT) approved by the National Highway Traffic Safety Administration. A screening test will be conducted first. This initial screening may be accomplished using a saliva test kit. If the result is an alcohol concentration level of less than 0.02 percent, the test is considered a negative test. If the alcohol concentration level is 0.02 percent or more, a second confirmation test using the EBT will be conducted. The procedures that will be utilized by the lab for collection and testing of the specimen are attached hereto as Appendix A.

  • STATEWIDE ACHIEVEMENT TESTING When CONTRACTOR is a NPS, per implementation of Senate Bill 484, CONTRACTOR shall administer all Statewide assessments within the California Assessment of Student Performance and Progress (“CAASPP”), Desired Results Developmental Profile (“DRDP”), California Alternative Assessment (“CAA”), achievement and abilities tests (using LEA-authorized assessment instruments), the Fitness Gram, , the English Language Proficiency Assessments for California (“ELPAC”), and as appropriate to the student, and mandated by LEA pursuant to LEA and state and federal guidelines. CONTRACTOR is subject to the alternative accountability system developed pursuant to Education Code section 52052, in the same manner as public schools. Each LEA student placed with CONTRACTOR by the LEA shall be tested by qualified staff of CONTRACTOR in accordance with that accountability program. ▇▇▇ shall provide test administration training to CONTRACTOR’S qualified staff. CONTRACTOR shall attend LEA test training and comply with completion of all coding requirements as required by ▇▇▇.