Room Types Clause Samples

Room Types. The vast majority of residence hall rooms at SUNY Oswego are “doubles.” A limited number of Triple, Quad and Single Rooms are available for ▇▇▇- gible students.
View SourceView Similar (3)
Room Types. OPEN-PLAN OFFICES CONFERENCE ROOMS, QUIET ROOMS RELAXATION ROOMS SERVER/STOCK ROOM PANTRY/BREAK AREA CLOAKROOM WCs, RWCs, SHOWERS CLEANING
View SourceView Similar (2)
Room Types. Vendor will develop the capability for the System Software to allow four (4) character room types and allow the total number of room types as specified by HII in Exhibit 4.1 to be used as the sole identifier of rooms in the Basic PMS System. The parties acknowledge that such development has been completed and is available for use by Hotels and Affiliates as part of the System Software and shall be distributed to the Hotels at no additional charge to HII or to the Hotels.
View Source
Room Types. The hotel was built in 1979. Partial renovation takes place annually. In 2017 - renovation of Superior and Classic rooms, 2018 - renovation of bungalow rooms category Exclusive and Two Bedroom Maisonettes. The hotel consists of a main building, an annex building and a bungalow complex. Total 320 rooms. Main building: There are rooms available for guests with impaired mobility.
View Source
Room Types. In 2010, major renovation was carried out, and now the hotel offers a cozy and comfortable atmosphere of the XXI century. There are rooms without a balcony, with large windows, double glazed windows. Total rooms 9:
View Source
Room Types a master list aligning OmniClass 2012 Table 13 to the Authority’s room types and information that is tracked relative to room type. Tracked Assets – DGS‐DCS Tab: o G to I: specifies the Level of Detail (geometry) required for the asset type by the specified submission. o J to N: specifies specific parameter information the submission by which the information is to be present in the model dataset.  Column O to AA: Construction specific requirements. o O: transition band N/A o P to Z: specifies specific timeline associated with the required upload of data and documents. o AA: specifies the total number of fields for the data and document uploads.  Column A: the Authority Room Type Name  Column B: OmniClass 2012 Table 13 Number  Column C: OmniClass 2012 Table 13 Name / Description.  Column D to P: the submission by which the Design specific requirements are to be in the model dataset. The parameter Design uses to capture this information is to be consistent across all models for each requirement and be recorded in the PEP o D to F: Room Name, Number and OmniClass Number. o G to Q: Additional parameters required and the submission by which the data is to be present in the model dataset. Row 1: Columns D to Q contain a notes field to help define the requirement. Fraser Health Authority ‐ Burnaby Hospital Redevelopment BIM requirements Attachment G 2020‐05‐11 Summit BIM Consulting Asset Group Asset Category Asset Type Comments DESIGN PHASE (DGS) OmniClass Classification Data And Geometry Specification Design Phase Required Parameters and level of model development CONSTRUCTION PHASE (DCS) DATA COLLECTION SPECIFICATION (DCS) Construction Phase Required Collection Parameters Milestone LOD Data parameters Submission @ Shop Drawings Approval Submission Prior to: Substantial Completion # of Parameters by Asset Type Acronyms 30% 50% 70% 90% Asset Description Type Mark Mark System Information (Name, Classification, Abreviation,etc.) Tender Packge Name/Number (if applicable) Shop Drawings (Aproved) Vendor / Supplier Manufacturer Model Serial No. Pressure Vessel # Manufacturers Instruction Manuals Installation Date /Substantial Com Warranty End Date Asset/Maximo Number Additional Notes Architectural Architectural Architectural Architectural Architectural Architectural Architectural Architectural Automatic Door ADR 23‐17 11 00 (Doors) LOD 100 LOD 100 LOD 200 LOD 300 30% 30% 70% 90% Y Y Y Y Y Y Y Y Y 9 Building Envelope BLDGE 23‐19 29 00 (Complete Buildings) LOD 100 L...
View Source
Room Types. The hotel consists of a central building and a bungalow complex. Total rooms 240:
View Source
Room Types. The hotel has 152 rooms, 71 of which have a swimming pool: or 2 single beds, outdoor Jacuzzi, max 2 people, 32 m2); room with sea view, bedroom, living room, main bed - double or 2 single beds, extra - sofa, max 3 people, 45 m2); single beds, individual pool, patio, max 2 people, 37 m2); a living area, main bed - double or 2 single beds, individual pool, patio, max 3 people, 48 m2); There are 4 rooms for people with limited mobility (DEEP BLU DELUXE SEA VIEW GUESTROOM).
View Source
Room Types. Aquila Atlantis Hotel was built in 1968, and a complete renovation was carried out in winter 2013. It consists of the main 6-storey building (2 elevators). Total rooms 164: ROOM BUSINESS CITY VIEW (located on all floors, main bed - 2 single or double, max 2 people, 24 m2); COMFORT ROOM CITY VIEW (main bed - 2 single or double, extra - sofa, max 3 people, 20-24 m2); EXECUTIVE ROOM HARBOR VIEW (main bed - 2 single or double, extra - sofa, max 3 people, 26 m2); SUPERIOR ROOM HARBOR VIEW (main bed - 2 single or double, max 2 people, 26 m2); DELUXE ROOM HARBOR VIEW (main bed - 2 single or double, max 2 people, 26 m2); JUNIOR SUITE HARBOR VIEW (main bed - 2 single or double, bathroom with hydro massage and SPA-shower, max 2 people, 35 m2); GRAND SUITE HARBOR VIEW (located on the 6th floor, living room with a dining area, bedroom with door, main bed - double, additional services: daily turn down service, free newspaper and private parking, max 2 people, 90 m2 );
View Source

Related to Room Types

  • Trunk Types 2.2.1 In interconnecting their networks pursuant to this Attachment, the Parties will use, as appropriate, the following separate and distinct trunk groups: 2.2.1.1 Interconnection Trunks for the transmission and routing of Reciprocal Compensation Traffic, translated LEC IntraLATA toll free service access code (e.g., 800/888/877) traffic, and IntraLATA Toll Traffic, between their respective Telephone Exchange Service Customers, Tandem Transit Traffic, and, Measured Internet Traffic, all in accordance with Sections 5 through 8 of this Attachment; 2.2.1.2 Access Toll Connecting Trunks for the transmission and routing of Exchange Access traffic, including translated InterLATA toll free service access code (e.g., 800/888/877) traffic, between Ymax Telephone Exchange Service Customers and purchasers of Switched Exchange Access Service via a Verizon access Tandem in accordance with Sections 9 through 11 of this Attachment; and 2.2.1.3 Miscellaneous Trunk Groups as mutually agreed to by the Parties, including, but not limited to: (a) choke trunks for traffic congestion and testing; and, (b) untranslated IntraLATA/InterLATA toll free service access code (e.g. 800/888/877) traffic. 2.2.2 Other types of trunk groups may be used by the Parties as provided in other Attachments to this Agreement (e.g., 911/E911 Trunks) or in other separate agreements between the Parties (e.g., directory assistance trunks, operator services trunks, BLV/BLVI trunks or trunks for 500/555 traffic). 2.2.3 In accordance with the terms of this Agreement, the Parties will deploy One-Way Interconnection Trunks (trunks with traffic going in one direction, including one-way trunks and uni-directional two-way trunks) and/or Two-Way Interconnection Trunks (trunks with traffic going in both directions). 2.2.4 Ymax shall establish, at the technically feasible Point(s) of Interconnection on Verizon’s network in a LATA, separate Interconnection Trunk group(s) between such POI(s) and each Verizon Tandem in a LATA with a subtending End Office(s) to which Ymax originates calls for Verizon to terminate. 2.2.5 In the event the volume of traffic between a Verizon End Office and a technically feasible Point of Interconnection on Verizon’s network in a LATA, which is carried by a Final Tandem Interconnection Trunk group, exceeds (a) the Centium Call Seconds (Hundred Call Seconds) busy hour equivalent of one (1) DS1 at any time; (b) 200,000 minutes of use for a single month; and/or; (c) 600 busy hour Centium Call Seconds (BHCCS) of use for a single month: (i) if One-Way Interconnection Trunks are used, the originating Party shall promptly establish new or augment existing End Office One-Way Interconnection Trunk groups between the Verizon End Office and the technically feasible Point of Interconnection on Verizon’s network; or,

  • License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.

  • Account Types The Financial Institution agrees that each Collateral Account is, and will be maintained as, either a “securities account” (as defined in Section 8-501 of the UCC) or a “deposit account” (as defined in Section 9-102(a)(29) of the UCC).

  • OTHER TYPES OF LEAVE Court Leave

  • FURNITURE CLASSIFICATIONS Furniture classifications include but not limited to: Cafeteria, Dormitory, Library Shelving and Library Related, Lounge, Systems (Modular), School (Classroom), Freestanding, Seating, Filing Systems and Equipment, and Technology Support.