Control Panel Sample Clauses
The Control Panel clause establishes the rights and procedures for accessing and managing a designated online interface or dashboard related to the agreement. Typically, this clause outlines which party is responsible for maintaining the control panel, what functionalities are available—such as monitoring usage, updating account information, or configuring service settings—and any security or access protocols that must be followed. Its core practical function is to ensure both parties have a clear understanding of how to interact with and utilize the control panel, thereby facilitating efficient management of the services or products governed by the contract.
Control Panel. When you click on it, it will prompt you for the serial number. Enter the code from the back of the CD case. It is a ten digit number that begins with FB-. (see third screen below). We recommend you also install the Stat Crew Software Control Panel. This tool provides quick access to program functions from a centralized location. You can also use the Control Panel to access software maintenance updates via the internet.
Control Panel. 12.4.1. To access the Nuvei online reporting system (“Nuvei Control Panel”), Merchant shall provide a valid, working administrative email address and identify an “Administrator” to access the Nuvei Control Panel. Subsequent changes in the identity of the Administrator will require submitting additional documentation signed by the Administrator or a C-level executive of the Merchant. Nuvei recommends that the Administrator be a C-level executive of the Merchant. By electing to allow the Administrator access to the Nuvei Control Panel, Merchant hereby grants the Administrator full access/action permissions to Merchant’s account(s) on the Nuvei Control Panel. Unless expressly requested by Merchant or the Administrator, the Administrator is the only person who is authorized on behalf of Merchant to define, allocate and manage the access of the Merchant’s additional authorized users to the Nuvei Control Panel. This includes, but is not limited to, role management, requesting password re-allocation, and granting a shared log-in (“Administrator Permissions”). ▇▇▇▇▇▇▇▇ specifically authorizes the Administrator to appoint authorized users with Administrator Permissions without the need for further Merchant approval. ▇▇▇▇▇▇▇▇ is fully aware of the scope and potential consequences of such permission. When contacting Nuvei, the Administrator and authorized users with Administrator Permissions will be taken through security procedures to validate their identity.
12.4.2. Account activation email shall be initiated by the Nuvei Control Panel directly by the Administrator and those users authorized by the Administrator. The Administrator and such authorized users shall be referred to jointly as “Authorized Users”. Unless expressly waived by Nuvei, only company e-mail domain addresses are acceptable for Authorized Users (i.e. not Hotmail, Gmail, Yahoo, etc.). Generic email accounts (e.g., ▇▇▇▇▇@▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇) must be role-based and may not be an internal distribution group. Any changes to the identity of the Administrator must be made via the administrative email address provided. Password resets are only available by calling the Nuvei Technical Support Team. A password reset may only be initiated by the Administrator. The Administrator is authorized to perform a password reset for any Authorized User.
12.4.3. Merchant shall not attempt, nor permit persons who are not identified herein, or by the Administrator, and confirmed by ▇▇▇▇▇ as an Authorized User, to access ...
Control Panel. Control Panel should appear (Figure 4.24). Depends on the configuration and model, the icons may appear differently.
Control Panel. Item 27(a) Clean and paint control panel. Item 27(c) Relocate control panel
4.3.22.1. All surfaces shall be cleaned free of all dust, dirt, grease, and debris.
4.3.22.2. All operating parts shall be thoroughly cleaned and lubricated.
4.3.22.3. All loose screws, nuts, bolts, and contacts shall be tightened.
4.3.22.4. All exterior and interior metal surfaces shall be thoroughly wire brushed and painted with two (2) coats of an approved paint. It will be necessary to remove and reinstall all electrical equipment in order to paint surfaces.
4.3.22.5. All doors and covers shall be adjusted so that they close completely and securely. Where a control cabinet is to be installed on a pole, the Contractor shall furnish all labor and equipment necessary and required to install the cabinet. Pole installation, extension of conduit and cables if and when required shall be under appropriate item.
Control Panel. When you click on it, it will prompt you for the serial number. Enter the code from the back of the CD case. It is a ten digit number that begins with TN-. (see third screen below). We recommend you also install the Stat Crew Software Control Panel. This tool provides quick access to program functions from a centralized location. You can also use the Control Panel to access software maintenance updates via the internet.
Control Panel. Item 27(a) - Clean and paint control panel. Item 27(c) - Relocate control panel as directed by the EIU.
4.71.1 All surfaces shall be cleaned to be free of all dust, dirt, grease, and debris.
4.71.2 All operating parts shall be thoroughly cleaned and lubricated.
4.71.3 All loose screws, nuts, bolts, and contacts shall be tightened.
4.71.4 All exterior and interior metal surfaces shall be thoroughly wire brushed and painted with two (2) coats of an approved paint. It will be necessary to remove and reinstall all electrical equipment in order to paint surfaces.
4.71.5 All doors and covers shall be adjusted so that they close completely and securely. Where a control cabinet is to be installed on a pole, the Contractor shall furnish all labor and equipment necessary and required to install the cabinet. Pole installation, extension of conduit and cables if and when required shall be under appropriate item.
Control Panel. The Rotary Pilot Kiln will have a standalone control panel that will be fixed onto the sidewall of the kiln, unless the client specifies otherwise. The control panel will house the necessary switchgear for the complete operation of the kiln including 2 PID temperature controllers and the HMIs for the VSDs.
Control Panel. The control panel and remote annunciator panel shall have dedicated alarm, supervisory and trouble LED’s and dedicated alarm, supervisory and trouble acknowledge switches.
Control Panel. 4 Zone Main Control Panel (Latest Microprocessor Technology based as per IS – 2189- 2008) with inbuilt Auto Dialer, with inbuilt LED indication, with inbuilt SMPS, with a feature of continuous uninterrupted power supply (in case of external power supply failures). Panel should indicate the health of the system (Fault, Power Failure, Battery Status indicator, faulty Zone Indication etc. The System should automatically (arming & disarming) change from day to night mode & vice versa as per the real time clock (Programmable) and also have option to change manually too. System should automatically reset after activation- 03 minutes (day/night mode) Inbuilt Auto Dialer with facility to dial at least 5 Telephone/ Mobile Numbers each & voice message of at least 20 Seconds Message should be repeated at least twice before dialling 2nd number. In case of Number not responded, facility to re- dial the number after completing the cycle # Rate should be quoted per unit Rs.
Control Panel. When you click on it, the program will begin installation. After it’s finished, check the box to launch the program. At that point, you will be asked to type in your serial number and the name of the licensee. We recommend you also install the Stat Crew Software Control Panel. This tool provides quick access to program functions from a centralized location. You can also use the Control Panel to access software maintenance updates via the internet.