Special Processes Sample Clauses

Special Processes. Suppliers providing special processing must maintain a system for validating processes similar to that of a NADCAP program, or other system as required by purchase order.

Special Processes. Special processes must be assessed and documented accordingly by the supplier once a year according to AIAG CQI. The documentation must be made available to the LEIBER Group on request. Special processes are production processes where the quality of the generated products can only be verified by a destructive test. For example: Heat treatment, surface coating.

Special Processes a. Supplier shall provide certifications for all special processes and non-destructive test results performed with each shipment. The certificate shall identify the processor, process used, controlling specification & revision, and the results of test or measurement performed. Supplier used shall be an STS and/or customer approved source for said processes. These include operations subject to process controls such as: coating, joining, heat treating, cleaning, non-destructive test, etc. The supplier shall be approved as per above to perform specific required special processes or use special process vendors acceptable STS Mod Center.

Special Processes. 6.1. For physical, metallurgical, chemical properties of materials, as well as regulations, the supplier should provide a Certificate of Conformance (CoC) with a format provided by ▇▇▇▇▇▇ (Form QS-4-132). Certificates shall reference applicable ▇▇▇▇▇▇ part numbers, revisions, lot numbers, PO number, etc. Examples of product attributes or processing steps that require certification include but are not limited to: • Welding • Heat Treatment • Plating • Painting • UL • RoHS • REACH • ATEX • WEE

Special Processes i) Special processes shall be defined as Painting, Anodizing, Plating, Chemical Finishing, soldering, gluing etc. ii) The Suppliers who perform Special Processing for the Buyer shall ensure that the required special processes are conducted in accordance with the drawing and/or specification requirements and that competent qualified personnel perform all special processes. iii) The supplier shall provide a Certificate of Conformity (CofC’s) with every order certifying that the parts were processed in accordance with the drawing and/or specification requirements.

Special Processes. Supplier shall provide certifications for all special processes and nondestructive test results performed with each shipment. The certificate shall identify the processor, process used, controlling specification & revision, and the results of test or measurement performed. Supplier used shall be a GWENT CABLES LTD and/or Customer approved source for said Processes. These include operations subject to process controls such as: coating, joining, heat treating, cleaning, non- destructive test, etc. The Supplier shall be approved as per above to perform specific required Special Processes, or use Special Process vendors acceptable to GWENT CABLES LTD and GWENT CABLES LTD's customer.

Special Processes. Seller and its sub-tiers shall notify iRF if any special processes are to be performed under this purchase order. Special processes are when a product undergoes a physical, chemical, or metallurgical transformation or when conformance to all specifications cannot be verified by normal inspection methods. Special processes include welding, brazing, soldering, plating, heat treating, magnetic particle and penetrant inspection, etc.

Special Processes. Unless approved by SPWA in advance, Licensor shall not utilize any special photographic, audio and technical processes for the Picture which impact the commercial viability of the Picture and/or SPWA’s costs of exploiting the Picture (e.g., increased duplication costs).

Special Processes. Suppliers shall perform on an yearly basis a self- evaluation of each applicable special process listed below in compliance with the Automotive Industry Action Group (AIAG) Manual and provide results to WABCO upon request: • CQI-9: Heat Treat System Assessment; • CQI-11: Plating System Assessment; • CQI-12 : Coating System Assessment; • CQI-15: Welding SystemAssessment; • CQI-17 :Soldering System Assessment; • CQI-23: Molding System Assessment. For further information, please visit ▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇ 11. Processos Especiais Os Fornecedores deverão realizar anualmente uma auto- avaliação de cada processo especial, listado abaixo, assegurando a conformidade com os manuais do AIAG (Automotive Industry Action Group), e fornecer resultados à WABCO, mediante solicitação: • CQI-9 : Avaliação do Sistema de Tratamento Térmico; • CQI-11 : Avaliação do Sistema de Revestimento; • CQI-12 : Avaliação do Sistema de Pintura; • CQI-15 : Avaliação do Sistema de Soldagem; • CQI-17 : Avaliação do sistema de soldagem Elétrica e Eletrônica; • CQI-23.: Avaliação do Sistema de Moldagem. Para mais informações, por favor visite ▇▇▇▇://▇▇▇.▇▇▇▇.▇▇▇