Test apparatus Clause Samples

Test apparatus. 1.1. The apparatus shall consist of a mist chamber, a salt solution reservoir, a supply of suitably conditioned compressed air, one or more atomizing nozzles, sample supports, provision for heating the chamber, and necessary means of control. The size and detailed construction of the apparatus shall be optional, provided that the test conditions are met. 1.2. It is important to ensure that drops of solution accumulated on the ceiling or cover of the chamber do not fall on test samples. 1.3. Drops of solution which fall from test samples shall not be returned to the reservoir for respraying. 1.4. The apparatus shall not be constructed of materials that will affect the corrosiveness of the mist.
View SourceView Similar (28)
Test apparatus. 1.2.1. This apparatus consists of a pendulum whose pivot is supported by ball-bearings and whose reduced mass* at its centre of percussion is 6.8
View SourceView Similar (15)
Test apparatus. Inlet flange or sleeve – connection to the rear of complete exhaust silencing system to be tested.
View SourceView Similar (7)
Test apparatus. 3.1. This apparatus consists of a fully guided linear impactor, rigid, with a mass of 6.8 kg. Its impact surface is hemispherical with a diameter of 165 mm. 3.2. The head form shall be fitted with two accelerometers capable of measuring values in the impact direction.
View SourceView Similar (5)
Test apparatus. 2.1.1. This consists of cylindrical surfaces with a radius of curvature equal to 82 ± 3 mm and a width: 2.1.1.1. At least equal to the width of the seat-back of each seating position of the seat to be tested for the upper form; 2.1.1.2. Equal to 320 -0/+10 mm for the lower form as shown in Figure 1 of this appendix. 2.1.2. The surface resting against the parts of the seat shall be made of a material the hardness of which is not less than 80 Shore A. 2.1.3. Each cylindrical surface shall be equipped with at least one force transducer able to measure the forces applied in the direction defined in paragraph 2.2.1.1.
View SourceView Similar (5)
Test apparatus. 1.1. A rigid structure sufficiently representative of the seat intended for use on the vehicle is fixed by the means of fixation (bolts, screws, etc.) provided by the manufacturer to the parts of the structure submitted to the tests. 1.2. If several seat types differing from one another in respect of the distance between the front and back ends of their feet can be mounted on the same anchorage, the test shall be carried out with the shortest footing. This footing shall be described on the type- approval certificate.
View SourceView Similar (3)
Test apparatus. 1.2.1. This apparatus consists of a pendulum whose pivot is supported by ball‑bearings and whose reduced mass/*/ at its centre of percussion is 6.8/kg. The lower extremity of the pendulum consists of a rigid headform 165/mm in diameter whose centre is identical with the centre of percussion of the pendulum. 1.2.2. The headform shall be fitted with two accelerometers and a speed‑measuring device, all capable of measuring values in the direction of impact.
View SourceView Similar (2)
Test apparatus. 3.1.1. This consists of cylindrical surfaces with a radius of curvature equal to 82 +3 mm and a width: 3.1.1.1. at least equal to the width of the seat-back of each seating position of the seat to be tested for the upper form, - 0 3.1.1.2. equal to 320 mm for the lower form as shown in figure 2 of this +10 annex. 3.1.2. The surface resting against the parts of the seat shall be made of a material the hardness of which is not less than 80 Shore A. 3.1.3. Each cylindrical surface shall be equipped with at least one force transducer able to measure the forces applied in the direction defined in paragraph 3.2.1.1. of this annex.
View Source
Test apparatus. 3.1. This apparatus consists of a fully guided linear impactor, rigid, with a mass of
View Source

Related to Test apparatus

  • Tooling Unless otherwise specified in this Agreement, all tooling and/or all other articles required for the performance hereof shall be furnished by Seller, maintained in good condition and replaced when necessary at Seller's expense. If NETAPP agrees to pay Seller for special tooling or other items either separately or as a stated part of the unit price of Goods purchased herein, title to same shall be and remain in NETAPP upon payment therefore.

  • Devices BNY Mellon will restrict the transfer of Customer Data from its network to mass storage devices. BNY Mellon will use a mobile device management system or equivalent tool when mobile computing is used to provide the services. Applications on such authenticated devices will be housed within an encrypted container and BNY Mellon will maintain the ability to remote wipe the contents of the container.

  • Firmware 7.1 The Supplier must deliver the equipment, Goods or hardware equipped with all the firmware required to use all the Goods or hardware’s functions. Any software embedded in the equipment, Goods or hardware, including the firmware, is provided to the Local Government with a license to use this software, with all license costs and royalties being included in the Fee Schedule (Schedule C). All firmware will be the most recent version available at the time of shipping.

  • Preservative-treated Wood Containing Arsenic Grantee may not purchase preservative-treated wood products containing arsenic in the performance of this Agreement unless an exemption from the requirements of Chapter 13 of the San Francisco Environment Code is obtained from the Department of the Environment under Section 1304 of the Code. The term “preservative-treated wood containing arsenic” shall mean wood treated with a preservative that contains arsenic, elemental arsenic, or an arsenic copper combination, including, but not limited to, chromated copper arsenate preservative, ammoniacal copper zinc arsenate preservative, or ammoniacal copper arsenate preservative. Grantee may purchase preservative-treated wood products on the list of environmentally preferable alternatives prepared and adopted by the Department of the Environment. This provision does not preclude Grantee from purchasing preservative-treated wood containing arsenic for saltwater immersion. The term “saltwater immersion” shall mean a pressure-treated wood that is used for construction purposes or facilities that are partially or totally immersed in saltwater.

  • Software The Software is licensed to you subject to any terms and conditions presented when you downloaded it from a source authorized by NCR Voyix, as well as those contained in this Agreement. If there is a conflict, this Agreement will control. You are licensed to use the Software only with the Service and with Hardware purchased or subscribed from NCR Voyix or its Resellers. Your license to any Software will end when your subscription to the Service ends. The Software is copyrighted and licensed, not sold, and is NCR Voyix’s confidential and unpublished information. You will retain any copyright notices and proprietary legends on all copies of the Software and the media on which it is delivered. Any attempt to transfer the Software is void and will automatically cause your license to end.