THIRD PARTY INSPECTION Clause Samples
POPULAR SAMPLE Copied 24 times
THIRD PARTY INSPECTION. Contractor understands that the Owner Designees or the Lenders, and certain Government Authorities have or shall have the right, from time to time, to observe and inspect the Work and the Facility and to observe all tests of the Work and the Facility. Contractor shall allow such third-party inspectors access to the Work and the Facility and to the Contractor’s technical and design records pertaining thereto, so long as either Owner’s Representative is present or Contractor has obtained the prior written approval of Owner. Owner agrees to protect as confidential anything designated by Contractor as such, whether by notation thereon or separate Notice; provided that in no event shall Owner be liable to Contractor for the failure of any party (other than Owner) to comply with the confidentiality requirements of Contractor.
THIRD PARTY INSPECTION. Contractor understands that the Owner Designees or the Lenders, and certain Government Authorities have or shall have the right, from time to time, to observe and inspect the Work and the Facility and to observe all tests of the Work and the Facility. Contractor shall allow such third-party inspectors access to the Work and the Facility and, upon execution by a third-party (excluding Government Authorities) of a confidentiality agreement with Contractor, to the Contractor’s technical and design records pertaining thereto, so long as either Owner’s Representative is present or Contractor has obtained the prior written approval of Owner. Owner agrees to protect as confidential anything designated by Contractor as such, whether by notation thereon or separate Notice; provided that in no event shall Owner be liable to Contractor for the failure of any party (other than Owner) to comply with the confidentiality requirements of Contractor.
THIRD PARTY INSPECTION. An independent inspector is to be appointed to carry out inspection duties outlined in American Petroleum Institute - Manual of Petroleum Measurement Standards (API - MPMS) for all shipments of Kirkuk crude oil loaded from Ceyhan Terminal. Both First Party and Second Party shall equally share the inspection fees.
THIRD PARTY INSPECTION. Contractor understands that the Owner Designees or the Lenders, and certain Government Authorities have or shall have the right, from time to time, to observe and inspect the Work and the Facility and to observe all tests of the Work and the Facility. Contractor shall allow such third-party inspectors access to the Work and the Facility and to the Contractor’s technical and design
THIRD PARTY INSPECTION. List of Third Party Inspection Agency has to be submitted by the bidder to the Purchaser / consultant for approval. Only Approved Third Party Inspection Agencies Shall Be engaged by the bidder for Inspection of CNG Compressor & Its Components before Shipment to GSL.
THIRD PARTY INSPECTION. An inspection performed by a recognized, qualified organization or individual, that examines and/or evaluates the safety, integrity, workmanship, and installation of electrical equipment installed as part of a Generating Facility.
THIRD PARTY INSPECTION. The vendor shall arrange to get the testing of the fabric at ATIRA (Ahmedabad Textile Industry's Research Association). Vendor shall arrange to send required sample to ATIRA from the same lot from which IFR suits will be made.
a) GSM of fabric shall be 150 +/- 10% when tested as per ASTM D3776.
b) Air permeability shall be minimum 10 Cm3-sec/ Cm2 when tested as per ASTM D737 at 125 pascals
c) Abrasion resistance shall be minimum 30,000 cycles-9KPI when tested as per ISO 12947-2
d) Pilling performance shall be minimum 2-3 when tested as per ISO 12947-2 at 4000 cycles
e) Laundry shrinkage at 60C shall be maximum 3% when tested as per ISO 6330:2000
f) Tensile strength of minimum 750N warp and Weft 750N when tested as per ISO 13934-1
g) Tear strength of minimum 35N warp and weft 35N when tested as per ISO 13934-1
h) Elongation at break shall be minimum 30% when tested as per ISO 13934-1
i) Vertical flame test-char length shall be less than 4 inches when tested as per ASTM D6413.
j) When tested as per ISO 105, wash fastness rating of 4 and light fastness rating of 2.5 to be achieved.
k) The fabric shall be tested to EN ISO 11612-2008 A1, B1, C1, F1.
l) Flame retardant fabric shall confirm to the requirement of Vertical Flame Test as per Method 'A' of IS 11871- 1986.
m) (Test Reports as per IS 11871 for the material supplied to be submitted along with supply).
THIRD PARTY INSPECTION. 1) ▇▇▇▇▇ & ▇▇▇▇▇▇▇▇:
THIRD PARTY INSPECTION. REIL shall get the Solar PV Systems inspected after installation & commissioning, by a third party as nominated by Ministry of New & Renewable Energy Sources, Govt. of India / RD &PR Department Govt. of Rajasthan. Any charges born by the third party would be paid by RD &PR Department, Govt of Rajasthan. The third party would conduct random inspection of Solar PV Systems at 2 nos. of Gram Panchayats in each Panchayat Samiti of each district & Solar PV Systems at 2 nos. of Panchayat Samities in each district & submit report to DPC as per Annexure 10 .
THIRD PARTY INSPECTION. List of Third-Party Inspection Agency has to be submitted by the bidder to the Purchaser / consultant for approval. ONLY APPROVED THIRD PARTY INSPECTION AGENCIES SHALL BE ENGAGED BY THE BIDDER FOR INSPECTION OF MOTOR DRIVEN CNG COMPRESSOR (250 SCMH) & ITS COMPONENTS BEFORE SHIPMENT TO GSL. ANNUAL RATE CONTRACT FOR SUPPLY OF MOTOR DRIVEN CNG COMPRESSOR AT CHURU, MANDI, PAURI ▇▇▇▇▇▇ (RISHIKESH) & CHAMPAWAT GA TENDER DOCUMENT NO: GSL/REPL/002/CP Date: 04/11/2022